Arc erosion reduction on electrical contacts using transversecurrent injection

Electrical contact lifetime is often directly determined by arc erosion. A method for reducing are erosion was developed consisting of injecting from an external current source an additional electrical current flowing parallel to the contact surface. This method was examined in three are environments using the additional transverse electrical current with a density less than 1 A/mm²: 1) automobile ignition contacts; 2) pulsed air arc; and 3) low pressure (P=100 mTorr) arc in nitrogen, SEM and X-ray examination showed that application of a transverse current in a contact during arcing changed the phase composition and microstructure of the contact surface. Under optimal conditions, the microstructure which is formed is significantly more erosion resistant than without the transverse current injection     

Gain saturation in quantum-well heterostructures

The effect of radiation gain saturation in quantum-well heretostructures was investigated in the system GaAs—AlGaAs with regard to the spectral line broadening and the type of radiation polarization. Belarusian State University, 4, F. Skorina Ave., Minsk, 220050, Belarus. Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 6, pp. 797–800, November–December, 1997.     

Electronic structure of the antiferromagnetic phase of NiMn

We present for the first time a self-consistent calculation of the electronic energy band structure of NiMn in the antiferromagnetic tetragonal phase. The electronic energy spectrum is calculated, along with the full and partial electronic density of states, the Fermi surface, the electronic specific heat coefficient, and the magnetic moments on each type of atom. We have studied the influence of structural distortions and antiferromagnetic ordering on the electronic structure of NiMn. Satisfactory agreement is found with the existing experimental data.Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 8, pp. 18–23, August, 1991.The authors express their appreciation to N. I. Kulikov and A. F. Tatarchenko for assistance in the computer calculations and for useful discussion of the work.     

Strings at nonzero temperature

String theory at nonzero temperature is reviewed. A bosonic string at nonzero temperature is studied and the calculation of its free energy in both the one-loop approximation and the case of arbitrary genus (multiloop analysis) is discussed. A string at nonzero temperature is compared with a string compacted on a one-dimensional torus. The properties of modular invariance and dual symmetry are discussed at both the one-loop and multiloop levels. The thermodynamics of superstrings, including also superstrings compactified on a torus, is also studied. Possible cosmological applications are briefly considered. It is shown that many features of string thermodynamics (in particular, the existence of the Hagedorn temperature and dual symmetry) also occur in the theory of noncritical strings.Translated from Izvestiya Vysshykh Uchebnykh Zavedenii, Fizika, No. 12, pp. 3–49, December, 1991.     

Estimation of the exchange constants in the Fe sublattice of the Y2Fe17 and Y2Fe17N3−δ compounds from the analysis of Mössbauer measurements

From the analysis of Mössbauer data for Y₂Fe₁₇ and Y₂Fe₁₇N_3−δ at various temperatures the hyperfine fields for 4f, 6g, 12j, 12k iron sites were estimated as a function of temperature. The reduced magnetizations calculated from the values of the hyperfine fields are fitted with a mean field model for four interacting sublattices using a computer program. The estimated exchange interaction from the fitting procedure between the 4f sites is found strongly negative (antiferromagnetic) in Y₂Fe₁₇ whereas in Y₂Fe₁₇N_3−δ it increases and becomes weak negative following a modified Slater-Néel curve. The rest of the exchange interactions are found positive or weak negative depending on the distances between the Fe atoms.     

Special features of the radiative capture of ultracold neutrons by thin and thick layers of matter

The radiative capture of ultracold neutrons traversing thin and thick homogeneous layers of matter is analyzed. The applicability range of the formulas for the probabilities of reflection, transmission, and capture in thick layers (under certain conditions, they admit a simple interpretation—it is often quoted in the literature—that is based on the effective capture cross section, which is in inverse proportion to the velocity of a neutron in matter) is investigated, along with the conditions under which there arises the effective capture cross section.     

Influence of preparation methods on structure and properties of PA6/PA66 blends: A comparison of melt‐mixing and in situ blending

The blends composed of polyamide 6 (PA6) and polyamide 66 (PA66) were obtained using two different preparation methods, one of which was the melt‐mixing through a twin‐screw extruder and the subsequent injection molding; and the other, the in situ blending through anionic polymerization of ε‐caprolactam in the presence of PA66. For the former, there existed a remarkable improvement in toughness but a drastic drop in strength and modulus; however, for the latter, a reverse but less significant trend of mechanical properties change appeared. Various characterizations were conducted, including the analyses of crystalline morphology, crystallographic form, and crystallization and melting behaviors using polarized optical microscopy (POM), wide‐angle X‐ray diffraction (WAXD), and differential scanning calorimetry (DSC), respectively; observation of morphology of fractured surface with scanning electron microscope (SEM); measurement of glass transition through dynamic mechanical analysis (DMA); and the intermolecular interaction as well as the interchange reaction between the two components by Fourier transform infrared spectrometry (FT‐IR) and ¹³C solution NMR. The presence and absence of interchange reaction was verified for the in situ and melt‐mixed blends, respectively. It is believed that the transreaction resulted in a drop in glass transition temperature (T_g) for the in situ blends, contrary to an increase of T_g with increasing PA66 content for the melt‐mixed ones. And the two kinds of fabrication methods led to significant differences in the crystallographic form, spherulite size and crystalline content and perfection as well. Accordingly, it is attempted to explain the reasons for the opposite trends of changes in the mechanical properties for these two blends. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1176–1186, 2007     

On the possibility of designing interacting semiconductor quantum wells with zero perturbation coupling

The paper describes the possibility of designing matched interacting semiconductor quantum wells. It is shown that for a given eigenstate of a quantum well (QW), it is always possible to find another QW in such a way that the coupling leaves the original eigenstate of the host QW unperturbed irrespective of the strength of interaction. For rectangular QWs, the condition is met with whenever the second QW has appropriate width and depth so that phase travelled by an electron wave through it is an integral multiple of π.     

Stability of translating solutions to mean curvature flow

We prove stability of rotationally symmetric translating solutions to mean curvature flow. For initial data that converge spatially at infinity to such a soliton, we obtain convergence for large times to that soliton without imposing any decay rates. The authors are members of SFB 647/B3 “Raum – Zeit – Materie: Singularity Structure, Long-time Behaviour and Dynamics of Solutions of Non-linear Evolution Equations”.