Pressure recovery system for a high-power HF/DF laser: implementation practice

The matter of development of a high-performance pressure recovery system (PRS) for a high-power HF/DF laser is discussed. A sequence of design steps is proposed, which involves estimation of basic characteristics of PRS components with the help of one-dimensional integral and semi-empirical procedures; simulation, to be performed using three-dimensional non-stationary Navier — Stokes equations; experimental modelling aimed at verification of the calculation procedures and at refinement of obtained parameters; and a fullscale experiment. An ejector-type system providing for recovery of pressure from 12 Torr to atmospheric pressure in the gas-dynamic system of an HF/DF laser of several-tens-kilowatt power is developed. Matching conditions for parameters of individual PRS components as well as joint functioning of the PRS with a continuous chemical laser in an integral complex are analysed. Conditions for minimization of mass-dimensional characteristics of the laser-PRS complex necessary for the development of ground-based mobile systems are identified.     

Photoemission studies of oxygen adsorbed on a LiAl(1 1 0) alloy surface: Role of Li segregation

We investigated that the effect of the number of segregated Li atoms on the rate of oxidation on a LiAl alloy surface. Oxygen molecules adsorbed on the LiAl alloy react with the surface atoms to form stable oxides. The segregated Li atoms at reconstructed surfaces (c(2×2) and (2×1)) enhance the oxidation rate and form stable LiAlO_x and Li₂O. The degree of enhancement of oxidation by segregated Li atoms varies as a function of O₂ exposure and annealing temperature, where the latter is directly related to the mode of surface reconstruction by Li segregation.     

Markarian 8星系的包层辐射

使用美国甚大天线阵(VLA).对Markarian 8星系进行了多频观测.多频VLA观测表明,Markarian 8星系有三个主要的射电子成份,它们浸在一个弥漫的星系包层中.包层的射电谱是陡的非热谱.本文根据VLA观测确定了包层的物理参量,并讨论了包层中相对论性电子的可能起因.本文估计了包层非热辐射所要求的超新星爆发率.     

Generation of red light at 660 nm by frequency doubling a Nd:YAG laser with periodically-poled stoichiometric LiTaO<Subscript>3</Subscript>

High power red light was generated from a periodically-poled stoichiometric LiTaO₃ (PPSLT) by single-pass frequency doubling of a diode-side-pumped, Q-switched Nd:YAG laser at 1319 nm. An average power of 2.4 W of the 660 nm red light was obtained at the fundamental power of ∼5.4 W with the conversion efficiency up to 44.4% and with low fluctuation down to 2%. The high efficiency and stability at the red output indicate that it is a practical method to construct a reliable compact red laser. PACS 42.70.Mp; 42.79.Nv; 42.55.Xi     

Growth of InAs nanostructures on InP using atomic-force nanolithography

Atomic-force nanolithography was used to control the nucleation sites of InAs nanostructures on InP substrates. Indentations with a wide range of dimensions were produced on InP. InAs nanostructures were selectively grown by metal organic vapor phase epitaxy. It is shown that the number of active nucleation sites depends on the normal force applied during nanoindentation. Crystalline defects introduced by nanoindentation are shown to be nucleation sites for these nanostructures. The presence of screw dislocations within the grown nanostructures further supports this observation. PACS 81.07.-b; 68.37.Ps; 81.16.Nd     

An unflexural refined model of deformation of multilayered plates on an undeformable foundation

The stress-strain state of multilayered plates on an undeformable foundation is investigated. The design diagram of a transversely loaded plate is formed by supplementing it with a symmetric one about the contact surface of the foundation. The double-thickness plate obtained becomes loaded bilaterally and symmetrically about its midsurface. In such a way, only unflexural deformations can be modeled, which reduces the number of unknowns and the general order of differentiation of the resolving system of equations. The refined continual model developed takes into account the deformations of transverse shear and transverse compression in high iterative approximations. The cases of a rigid contact between the foundation and the plate and frictionless slip of the plate over the foundation are considered. Calculations confirm the efficiency of such an approach, which allows one to obtain solutions qualitatively and quantitatively close to three-dimensional ones. __________ Translated from Mekhanika Kompozitnykh Materialov, Vol. 42, No. 5, pp. 643–654, September–October, 2006.     

Structural,magnetic and Mössbauer spectral studies of nanosize aluminum substituted nickel zinc ferrites

Nanosize aluminum substituted nickel zinc ferrites were prepared through aerosol route and characterized using TEM, XRD, magnetic measurements and Mössbauer spectroscopy. The particle size of as obtained samples was found to be ∼10 nm which increases up to ∼85 nm upon annealing at 1200 °C. The unit cell parameter ‘a’ decreases linearly with concentration of aluminum due to the small ionic radius of aluminum. The saturation magnetization for all the samples after annealing at 1200 °C lies in the range 12.9–72.6 emu/g and decreases linearly with concentration of aluminum. Room temperature Mössbauer spectra of all as obtained samples of ferrite compositions exhibited a broad doublet suggesting super paramagnetic nature. This doublet is further resolved into two doublets and assigned to the surface region and internal region atoms of the particles. The samples annealed at 1200 °C show broad sextets, which were fitted with five sextets, indicating different local environment of both tetrahedrally and octahedrally coordinated Fe cation.     

Correlation of Plasma Sprayed Coating Deposition Efficiency with Volume Flux Measurements by Phase Doppler Anemometry (PDA)

The use of phase-Doppler anemometry (PDA) to characterize the detail in-flight plasma sprayed particle behavior has been demonstrated previously [Ma et al. Plasma Chem Plasma Process 24(1):85; 25(1):56] The present articles shows further that a direct relationship may exist between the PDA measured particle volume flux and the coating microstructure and deposition efficiency (DE). In the situation when the precise particle temperature information is not available, the PDA measured particle volume flux may provide an alternative to predict quantitatively the variation of the coating microstructure and the DE. By monitoring the in-flight particle volume flux variations, instead of the particle velocity, size and temperature individually and simultaneously, the optimal settings of the plasma spraying parameters may also be determined conveniently. However, it is noted that the effective applications of such approach depend largely on the particle surface morphology and the pre-determination of the particle size range.