Numerical Prediction of the Strain State of Thermoset Matrix/Mineral Filler Composite Plates

The numerical prediction of the fields of inelastic strains (the linear invariant of the tensor of inelastic strains) in thermoset polyester/marble filler composite plates is discussed. A uniformly distributed load is applied to the plates, which lie on a steel base. The strain fields are predicted by means of the boundary element method by using creep test data for the composites and the polyester matrix itself. Identical creep tests were performed for two ages of the materials (1 month and 13 years), which allowed evaluating the aging effect. The study is carried out in two stages. At the first stage, the application of the generalized Maxwell-Gurevich equation to the thermoset matrix/mineral filler composite is demonstrated. The model parameters determined from the experimental creep data is used for the second stage, where the state of inelastic strains in the plates is predicted by applying the boundary element method. The influence of composite formulation (filler content) and physical aging of the polyester matrix on the state of inelastic strains in the plates is shown.__________Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 41, No. 2, pp. 145–156, March–April, 2005.     

Hybrid numerical—experimental approach for investigation of dynamics of microcantilever relay system

The time average holography measurements of the vibrating microelectromechanical switch (MEMS) were performed in this study. Experimental measurement results exhibit good agreement with computer generated holographic interferogram analysis. The validation of experimental investigations versus numerical analysis provides the necessary background to analyze the dynamical characteristics of micromechanical systems in virtual numerical environments. Direct application of fringe counting techniques for reconstruction of motion from time average holograms cannot be straightforward if the analyzed micromechanical systems contain motion limiters. Modifications of a classical time average holographic technique enable qualitative analysis of MEMS and can be applied for investigation of dynamical properties of much broader classes of MEMS systems.     

Statistical Theory of the Phonon Drag Force Acting on a Conduction Electron

Within the framework of microscopic fluctuation-dissipation theory, we obtain the stochastic equation describing the Brownian motion of an electron in the phonon field of the crystal lattice. An expression for the Green’s function of the phonon field is found in general form and for the case of linear phonon-variable interaction of an electron with the phonon field with allowance for the potential screening of crystal-lattice nuclei. An expression for the phonon drag acting on a conduction electron in the lattice field is found and analyzed with allowance for the interaction. Frequency dependence of the coefficient of the phonon drag acting on a conduction electron is studied and the contribution of the electron-phonon interaction to the effective mass of a charge carrier is determined.__________Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Radiofizika, Vol. 48, No. 3, pp. 249–268, March 2005.     

Survivability in IP-over-WDM Networks: WDM Lightpath Protection versus IP LSP Protection

This article compares the performance of WDM lightpath protection and IP LSP protection schemes for IP-over-WDM networks. A mathematical formulation of the maximum throughput problem is presented and analytical expressions for recovery time are derived for both schemes. The throughputs and recovery times are analyzed and compared. Results show that the IP LSP protection scheme presents higher throughputs then WDM lightpath protection. The IP LSP protection scheme, providing individual IP LSP protection has, however, scalability problems. This scheme presents high recovery times when a failure affects many lightpaths and many hops are allowed for the primary routes of IP LSPs.     

Closed-form solutions for a rectangular layer with central crack under anti-plane shear stress

We consider the problem of determining the stress distributionin a finite rectangular elastic layer containing a Griffithcrack which is opened by internal shear stress acting alongthe length of the crack. The mode III crack is assumed to belocated in the middle plane of the rectangular layer. The followingtwo problems are considered: (A) the central crack is perpendicularto the two fixed lateral surfaces and parallel to the othertwo stress-free surfaces; (B) all the lateral surfaces of therectangular layer are clamped and the central crack is parallelto the two lateral surfaces. By using Fourier transformations,we reduce the solution of each problem to the solution of dualintegral equations with sine kernels and a weight function whichare solved exactly. Finally, we derive closed-form expressionsfor the stress intensity factor at the tip of the crack andthe numerical values for the stress intensity factor at theedges of the cracks are presented in the form of tables.     

Reaction of 3,3,3-trifluoropropene-1 with bromoform and methylene bromide

The radical telomerization of 3,3,3-trifluoropropene with bromoform and methylens bromide has been studied. The nature of the products with bromoform depends substantially on the method of initiation. In the presence of Fe(CO)₅ + DMF, telomers of CHBr₂(CH₅₂CHCF₃)_nBr are formed, while with initiation with benzoyl peroxide other compounds are also formed that contain two, three, or four bromine atoms per molecule. To elucidate the formation of these products a reaction scheme is proposed that involves rearrangement of CHBr₂CH₂CH(CF₃)CH₃CHCF₃ radicals to CBr₂CH₂CH(CF₃)CH₂CH₂CF₃ radicals.Deceased.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 11, pp. 2558–2562, November, 1989.     

Determination of trace elements in Brazilian rice grains and in biological reference materials by neutron activation analysis

Instrumental neutron activation analysis was applied to the determination of the elements Na, K, Br, As, Rb, Zn, Co, Fe and Sc in Brazilian rice samples and in biological standards. Hg and Se concentrations were determined by using a simple radiochemical separation. The chemical procedure was carried out by means of distillation of Hg and Se in HBr medium and subsequent precipitation of selenium by sodium metabisulfite and mercury by thioacetamide. The accuracy of the instrumental and radiochemical methods was evaluated by means of analysis of the Reference Materials NBS-Bovine Liver, Bowen's Kale and NBS-Rice Flour.     

Control of small phase arrays to form a prescribed amplitude-phase distribution

Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Radiofizika, Vol. 32, No. 9, pp. 1132–1136, September, 1989.