Miscibility of bisphenol-A polycarbonate with poly(methyl methacrylate)

The miscibility of bisphenol-A polycarbonate (PC) with poly(methyl methacrylate) (PMMA) has been reexamined using differential scanning calorimetry (DSC) and optical indications for phase separation on heating, i.e., lower critical solution temperature (LCST) behavior. Various methods have been used to prepare the blends including methylene chloride (CH₂Cl₂) and tetrahydrofuran (THF) solution casting, melt mixing, and precipitation of PC and PMMA simultaneously from THF solution by using the nonsolvents methanol and heptane. It is shown that the resulting phase behavior for PC/PMMA blends is strongly affected by the blend preparation method. However, these blends are miscible over the whole blend composition range (unambiguous single composition-dependent T_g's and LCST behavior) when prepared by precipitation from solution using heptane as the nonsolvent. To the contrary, solution-cast and melt-mixed PC/PMMA blends were all phase separated, which may be attributed to the “solvent” effect and LCST behavior, respectively, not discovered in previous reports. Methanol precipitation does not lead to fully mixed blends, which demonstrates the importance of the choice of nonsolvent when using the precipitation method.     

Rate constants for the gas‐phase reaction of CF3CF2CF2CF2CF2CHF2 with OH radicals at 250–430 K

The rate constants k₁ for the reaction of CF₃CF₂CF₂CF₂CF₂CHF₂ with OH radicals were determined by using both absolute and relative rate methods. The absolute rate constants were measured at 250–430 K using the flash photolysis–laser‐induced fluorescence (FP‐LIF) technique and the laser photolysis–laser‐induced fluorescence (LP‐LIF) technique to monitor the OH radical concentration. The relative rate constants were measured at 253–328 K in an 11.5‐dm³ reaction chamber with either CHF₂Cl or CH₂FCF₃ as a reference compound. OH radicals were produced by UV photolysis of an O₃–H₂O–He mixture at an initial pressure of 200 Torr. Ozone was continuously introduced into the reaction chamber during the UV irradiation. The k₁ (298 K) values determined by the absolute method were (1.69 ± 0.07) × 10^?15 cm³ molecule^?1 s^?1 (FP‐LIF method) and (1.72 ± 0.07) × 10^?15 cm³ molecule^?1 s^?1 (LP‐LIF method), whereas the K₁ (298 K) values determined by the relative method were (1.87 ± 0.11) × 10^?15 cm³ molecule^?1 s^?1 (CHF₂Cl reference) and (2.12 ± 0.11) × 10^?15 cm³ molecule^?1 s^?1 (CH₂FCF₃ reference). These data are in agreement with each other within the estimated experimental uncertainties. The Arrhenius rate constant determined from the kinetic data was K₁ = (4.71 ± 0.94) × 10^?13 exp[?(1630 ± 80)/T] cm³ molecule^?1 s^?1. Using kinetic data for the reaction of tropospheric CH₃CCl₃ with OH radicals [k₁ (272 K) = 6.0 × 10^?15 cm³ molecule^?1 s^?1, tropospheric lifetime of CH₃CCl₃ = 6.0 years], we estimated the tropospheric lifetime of CF₃CF₂CF₂CF₂CF₂CHF₂ through reaction with OH radicals to be 31 years. © 2003 Wiley Periodicals, Inc. Int J Chem Kinet 36: 26–33, 2004     

Effects of sodium salicylate on the febrile response and increased levels of cyclic AMP in cerebrospinal fluid during endogenous pyrogen-induced fever in rabbits

To further evaluate the causality between endogenous pyrogen (EP)-induced fever and cyclic adenosine-3',5'-monophosphate (cyclic AMP) level, the effects of sodium salicylate (SS) on the febrile response and increased levels of cyclic AMP in both cerebrospinal fluid (c.s.f.) and plasma during EP-induced fever in rabbits were observed. The results suggest that cyclic AMP is probably involved in the central mediation of EP-induced fever and that increased concentration of cyclic AMP in c.s.f. associated with EP-induced fever is not the result of temperature elevation but appears to be caused by the increased synthesis in the central nervous system. In addition it is confirmed that blood is impossibly a contributory source of increased cyclic AMP in c.s.f. during EP fever, and that SS may act subsequent to the increase in cyclic AMP.     

Investigation of multicomponent fluoride optical materials in the UV spectral region: I. Single crystals of Ca1−x R xF2+x (R = Sc, Y, La, Yb, Lu) solid solutions

Crystalline materials that are transparent in the vacuum UV spectral region and currently used have been reviewed. Transmission of crystals of solid solutions with the fluorite structure Ca_1?x R _xF_2+x (R = Sc, Y, La, Yb, Lu) in the UV and vacuum UV spectral regions has been investigated. It is shown that application of different methods of purification of fluorides from some impurities can significantly improve the optical quality of fluoride multicomponent crystals in the short-wavelength spectral region.     

K X-ray production cross sections for 40-180 keV protons

Considering the importance of the X-ray production cross sections for the determination of the element concentrations in a given material, we have measured them experimentally for Al Si, Sc, Ti, V, Fe, Co, Ni and Cu bombarded by protons with energies ranging from 40 to 180 keV. This revised version was published online in July 2006 with corrections to the Cover Date.     

Structure of solid monolayers and multilayers of n -hexane on graphite

We present all-atom molecular dynamics simulations ofn-hexane on the basal plane of graphite at monolayer and multilayer coverages. In keeping with experimental data, we find the presence of ordered adsorbed layers both at single monolayer coverage and when the adsorbed layer coexists with excess liquid adsorbate. Using a simulation method that does not impose any particular periodicity on the adsorbed layer, we quantitatively compare our results to the results of neutron diffraction experiments and find a structural transition from a uniaxially incommensurate lattice to a fully commensurate structure on increasing the coverage from a monolayer to a multilayer. The zig-zag backbone planes of all the alkane molecules lie parallel to the graphite surface at the multilayer coverage, while a few molecules are observed to attain the perpendicular orientation at monolayer coverage. Dedicated to Professor C N R Rao on his 70th birthday     

Mathematical modelling of the oxidation of nickel titanium alloys

A one-dimensional bulk reaction model for the oxidation of nickeltitanium is formulated, with preferential oxidation of titaniumbeing included. The modelling is directed at the better understandingof the dominant mechanisms involved in the oxidation processand their significance for the biocompatibility of the alloy.Two different regimes for the relative diffusivities of oxygenand the metals are investigated. By assuming fast bulk reactions,different asymptotic structures emerge in different parameterregimes and the resulting models take the form of moving boundaryproblems. Different profiles of nickel concentration are obtained:in particular a nickel-rich layer (observed in practice) ispresent below the oxide/metal interface for the case when oxygenand the metals diffuse at comparable rates.