Composite polymeric electrolytes based on PMMA-LiCF3SO3-SiO2

Preliminary results on the mechanical, optical and electrical properties of composite gel electrolytes (CGEs) with fumed silica (SiO₂) as a filler added to gel polymeric electrolyte (GPE) based on PMMA, LiCF₃SO₃ and PC are presented in this paper. Added fumed silica is seen to enhance the mechanical properties of the GPE without changing the conductivity significantly. The high ionic conductivity (×10⁻³ S/cm), high transmission in the visible region and nominal variance of conductivity and viscosity over a wide temperature window show that these CGEs are potential electrolytes for electrochromic windows (ECWs).     

Hutchinson's shear coefficient for anisotropic beams

Timoshenko's theory of vibrating beams requires a shear correction factor to correctly take into account the effects of shear deformation for different beam cross-sections. This correction is crucial for a precise determination of the shear modulus from the resonant frequencies. Hutchinson's beam theory is used to derive a new shear correction coefficient for anisotropic materials. A comparison is made with other shear coefficients for anisotropic materials published in the literature. Computer-simulated spectra are used to validate the new anisotropic shear correction coefficient.     

Refraction holodiagrams and Snell's law

The refraction holodiagram RHD is analyzed here with respect to the law of refraction. Particularly, we study the surface that exactly conjugates by refraction a virtual point source with a real image or conversely. By using the total optical path as a parameter we build a diagram that consists in a family of Descartes ovals of the apple type that contains the Pascal's limaçon as a particular extreme case and the spherical surface with the Weierstrass points as another. These representations permit the straightforward application of Fermat's principle in the case of arbitrary refracting surfaces and show the shape of generalized Fresnel's zones in the intersections with any surface. Snell's law is applied to rays incident on the apple type surfaces to find out the conditions for exact conjugation. Sensitivity to optical path variations is also discussed. The RHD curves family can be represented in a Cartesian way where the ovals appear as equally spaced straight lines.     

Determination of flutter derivatives via a neural network approach

A neural-network-based method is offered to determine the flutter derivatives of section models under smooth and turbulent flows. The approach uses the observed dynamic responses to train an appropriate neural network. Subsequently, the modal parameters of the model for different mean velocities of wind flow are directly estimated using weight matrices in the neural network. The flutter derivatives can then be determined accurately. The validity of the present method is verified through numerical studies. Finally, the procedure is employed to process experimental data from an inverted-U-type section model, obtained from wind tunnel tests.     

The action of an electron beam on dust structures in a plasma

The action of an electron beam on ordered dust structures in glow and low-pressure RF discharges was studied experimentally. The electron beam produces destruction and dynamic displacement of the dust structure. In the center of a dust structure, an electron beam with a low electron energy (tens of eV) at currents up to 1 mA caused structural disordering and “melting” in the region of its action but did not excite external crystal regions. Local action of an electron beam with a high electron energy (25 keV) and a beam current above 10 mA caused deformation of the whole dust structure and shifted it in the horizontal direction so that it was carried away from the RF discharge zone. The effect of dust structure displacements can be used to locally remove particles from a plasma.     

A vector percolation modeling of oil–gas relative permeabilities

We presented exact analytical formulae and numerical calculation of diffusitivity curves with different law for a local pore behavior and have obtained critical exponent, different from conductivity. The connectivity percolation theory was built only on the conductivity, (the diffusion critical exponent was supposed to be equal to the conductivity exponent) and therefore sees only one side of problem-the scalar side. In many topological problems involving mechanical properties and fluid flow the connectivity scalar percolation geometry does not enough to apply.

One of the most useful aspects of percolation is that many very complicated systems have the same behavior with the same critical exponents. Universality of vector percolation is shown in the coincidence between the experimental measured relative hydraulic permeability of fluid and gas flow through unconsolidated sand and effective conductivity and diffusitivity curves of the bond–site percolation models. Comparisons of our calculation results to natural matches are quite good. We have argued that experimental data may be interpreted as a variant of pure vector percolation and to belong to the same universality class.     

两个回归函数相等的Bootstrap检验

两个回归参数相等性检验一直是统计界感兴趣的问题之一．在这篇文章中，四个检验统计量被用于度量两曲线的差异，在原假设下统计量的分布采用向量数据的重复抽样来逼近，并给出了—些模拟结果．     

Algebraic algorithms for the analysis of mechanical trusses

Infinite periodic lattices can be used as models for analyzing and understanding various properties of mechanical truss constructions with periodic structures. For infinite lattices, the problems of connectivity and stability are nontrivial from the mathematical point of view and have not been addressed adequately in the literature. In this paper, we will present a set of algebraic algorithms, which are based on ideal theory, to solve such problems.

For the understanding of the notion ``complicated three-dimensional lattices', it is essential to have this paper with colored figures.

     

Dynamic interaction of plasma flow with the hot boundary layer of a geomagnetic trap

The study of the interaction between collisionless plasma flow and stagnant plasma revealed the presence of an outer boundary layer at the border of a geomagnetic trap, where the super-Alfvén subsonic laminar flow changes over to the dynamic regime characterized by the formation of accelerated magnetosonic jets and decelerated Alfvén flows with characteristic relaxation times of 10–20 min. The nonlinear interaction of fluctuations in the initial flow with the waves reflected from an obstacle explains the observed flow chaotization. The Cherenkov resonance of the magnetosonic jet with the fluctuation beats between the boundary layer and the incoming flow is the possible mechanism of its formation. In the flow reference system, the incoming particles are accelerated by the electric fields at the border of boundary layer that arise self-consistently as a result of the preceding wave-particle interactions; the inertial drift of the incoming ions in a transverse electric field increasing toward the border explains quantitatively the observed ion acceleration. The magnetosonic jets may carry away downstream up to a half of the unperturbed flow momentum, and their dynamic pressure is an order of magnitude higher than the magnetic pressure at the obstacle border. The appearance of nonequilibrium jets and the boundary-layer fluctuations are synchronized by the magnetosonic oscillations of the incoming flow at frequencies of 1–2 mHz.