TOPOLOGY DESIGN OF STRUCTURES SUBJECTED TO PERIODIC LOADING

Although a lot of attention in the topology optimization literature has focused on the optimization of eigenfrequencies in free vibration problems, relatively little work has been done on the optimization of structures subjected to periodic loading. In this paper, we propose two measures, one global and the other local, for the minimization of vibrations of structures subjected to periodic loading. The global measure which we term as the “dynamic compliance” reduces the vibrations in an overall sense, and thus has important implications from the viewpoint of reducing the noise radiated from a structure, while the local measure reduces the vibrations at a user-defined point. Both measures bring about a reduction in the vibration level by moving the natural frequencies which contribute most significantly to the measures, away from the driving frequencies, although, as expected, in different ways. Quite surprisingly, the structure of the dynamic compliance optimization problem turns out to be very similar to the structure of the static compliance optimization problem. The availability of analytical sensitivities results in an efficient algorithm for both measures. We show the effectiveness of the measures by presenting some numerical examples.     

Miscibility of bisphenol-A polycarbonate with poly(methyl methacrylate)

The miscibility of bisphenol-A polycarbonate (PC) with poly(methyl methacrylate) (PMMA) has been reexamined using differential scanning calorimetry (DSC) and optical indications for phase separation on heating, i.e., lower critical solution temperature (LCST) behavior. Various methods have been used to prepare the blends including methylene chloride (CH₂Cl₂) and tetrahydrofuran (THF) solution casting, melt mixing, and precipitation of PC and PMMA simultaneously from THF solution by using the nonsolvents methanol and heptane. It is shown that the resulting phase behavior for PC/PMMA blends is strongly affected by the blend preparation method. However, these blends are miscible over the whole blend composition range (unambiguous single composition-dependent T_g's and LCST behavior) when prepared by precipitation from solution using heptane as the nonsolvent. To the contrary, solution-cast and melt-mixed PC/PMMA blends were all phase separated, which may be attributed to the “solvent” effect and LCST behavior, respectively, not discovered in previous reports. Methanol precipitation does not lead to fully mixed blends, which demonstrates the importance of the choice of nonsolvent when using the precipitation method.     

Conjugate addition of pyrroles to α,β-unsaturated ketones using copper bromide as a catalyst

Copper bromide was used as a catalyst for the addition of pyrroles to enones. When both the reactants were used in equimolar amounts, mono and dialkylated products were obtained. However, the use of excess enone furnished only dialkylated products. Thus, copper bromide was shown to be an efficient catalyst for the dialkylation of pyrroles.     

Illumination dependence of I-V and C-V characterization of Au/InSb/InP(1 0 0) Schottky structure

The effects of surface preparation and illumination on electric parameters of Au/InSb/InP(100) Schottky diode were investigated, in the later diode InSb forms a fine restructuration layer allowing to block In atoms migration to surface. In order to study the electric characteristics under illumination, we make use of an He-Ne laser of 1 mW power and 632.8 nm wavelength. The current-voltage I(V_G), the capacitance-voltage C(V_G) measurements were plotted and analysed. The saturation current I_s, the serial resistance R_s and the mean ideality factor n are, respectively, equal to 2.03 × 10⁻⁵ A, 85 Ω, 1.7 under dark and to 3.97 × 10⁻⁵ A, 67 Ω, 1.59 under illumination. The analysis of I(V_G) and C(V_G) characteristics allows us to determine the mean interfacial state density N_ss and the transmission coefficient θ_n equal, respectively, to 4.33 × 10¹² eV⁻¹ cm⁻², 4.08 × 10⁻³ under dark and 3.79 × 10¹² eV⁻¹ cm⁻² and 5.65 × 10⁻³ under illumination. The deep discrete donor levels presence in the semiconductor bulk under dark and under illumination are responsible for the non-linearity of the C⁻²(V_G) characteristic.     

An optodynamic method for the real-time determination of the depth of a laser-drilled hole

An experimental method for determining the real-time depth of laser-drilled holes is presented. The proposed method involves detecting the laser-induced optoacoustic waves generated during the interaction of the laser beam with the material. Our optodynamic study involved measuring the propagation times of these waves as they traveled through the material and analyzing their temporal behavior during the drilling process. The experimental observations revealed an exponential relationship between the propagation time of the longitudinal stress wave and the number of consecutive laser pulses. Received: 25 October 2001 / Accepted: 27 October 2001 / Published online: 20 December 2001     

Finslerian Extension of Lorentz Transformations and First-Order Censorship Theorem

Granted the post-Lorentzian relativistic kinematic transformations are described in the Finslerian framework, the uniformity between the actual light-velocity anisotropy change and the anisotropic deformation of measuring rods can be the reason proper for the null results of the Michelson-Morley-type experiments at the first-order level.     

Optical background measurement in a potential site for the NEMO KM undersea neutrino telescope

We describe the measurement of the deep sea optical background in some sites south of Capo Passero, Sicily. A continuous flux of about 440 photons cm ^-2 s ^-1 in the wavelength interval 440-550 nm is estimated due to the decays of the ⁴⁰K contained in the sea water. Bioluminescence light bursts are also observed and an example of time evolution is reported. All the measurements were accomplished using a deep sea module also described in this article. Received: 20 April 2002 / Published online: 26 July 2002     

On mechanical characteristics of nanocrystals

The dependence of the elastic moduli of a nanocrystal on its size is investigated theoretically with reference to a two-dimensional single-crystal strip. It is shown that the uncertainty (of a fundamental nature) in the size of a nanocrystal causes the determination of many of its mechanical characteristics to be ambiguous. It is found that the Cauchy-Green relations are modified and the elastic-constant tensor ceases to be symmetric; the size and shape of a nanocrystal render its mechanical properties more anisotropic. For a single-crystal strip, the Poisson ratio decreases and the Young modulus increases with decreasing thickness of the strip; in the case of a very thin crystal film (two atomic layers thick), these elastic moduli can differ from their macroscopic values by a factor of two. The size effects which make the continuum elasticity theory inapplicable to nanocrystals are estimated. The size effects that occur when the molecular dynamics method is applied for modeling macroscopic objects are also discussed.     

Expansion of monomer units in poly(ethylene terephthalate) molecules under conditions of thermal and zero-point atomic vibrations

The temperature dependence of the expansion ?_C of trans conformers of the carbon skeleton of macromolecules in crystallized and amorphous poly(ethylene terephthalate) (PET) due to zero-point and thermal atomic vibrations is investigated by IR spectroscopy. It is found that the thermal expansion coefficient β_C jumpwise increases at the characteristic temperatures T _t and T _b. This increase is associated with the crossover from the quantum to classical statistics of torsional and bending vibration modes. The quantum and classical contributions to the expansion ?_C are determined for each mode. The quantum and classical contributions of the torsional vibrational mode in the amorphous polymer are approximately 1.5 times larger than those in the crystallized polymer. This effect is caused by an increase in the anharmonicity of torsional vibrations in the amorphous polymer.