A piecewise conservative method for unconstrained convex optimization

Computational Optimization and Applications - We consider a continuous-time optimization method based on a dynamical system, where a massive particle starting at rest moves in the conservative...     

Optimization of Transducer Location for Novel Non-Intrusive Methodologies of Diagnosis in Diesel Engines

The health monitoring has been studied to ensure integrity of design of engine structure by detection, quantification, and prediction of damages. Early detection of faults may allow the downtime of maintenance to be rescheduled, thus preventing sudden shutdown of machines. In cylinder pressure developed, vibrations and noise emissions data provide a rich source of information about condition of engines. Monitoring of vibrations and noise emissions are novel non-intrusive methodologies for which positioning of various transducers are important issue. The presented work shows applicability of these diagnosis methodologies adopted in case of diesel engines. The effects of changing various fuel injection parameters was analyzed. Scope of using non-intrusive technique has been analyzed by changing locations of microphone. Novelty of this worklies in exploring signal processing methods for various locations around the engine test set up. Various frequency ranges of contributing noise and vibration sources were identified. Time-Frequency analysis showed the onset of various cyclic. Based on the identification of various frequency bands, it is possible to device suitable filters in order to extract more information.     

Comparative Study of LiInSe2 Single Crystals for Thermal-Neutron Detection

Crystallography Reports - Two LiInSe2 single crystals, grown under different conditions, have been studied. Characteristics of these crystals for neutron detection have been compared using...     

Composition and Antifungal Activity of Lipids from Seeds of Atriplex tatarica

Chemistry of Natural Compounds -     

Study of the Photocatalytic Antimicrobial Activity of Nanocomposites Based on TiO2–Al2O3 under Action of LED Radiation (405 nm) on Staphylococci

Optics and Spectroscopy - We study the photocatalytic activity of nanocomposites based on θ-phase alumina (Al2O3) with different TiO2 concentrations for heterogeneous photocatalysis and...     

On the Tender X-Ray Flat-Field Spectrograph with a Concave VLS Grating

Journal of Russian Laser Research - We analyze the way of advancing to tender X-rays the short-wavelength bound of the operating range of flat-field grating spectrographs. We design two VLS grating...     

STRUCTURAL ISOMERS AND VIBRATIONAL SPECTRUM OF TETRAFLUOROSUBSTITUTED ZINC PHTHALOCYANINE

Journal of Structural Chemistry - Structural parameters and relative Gibbs free energies are calculated by density functional theory methods for four tetrafluoro derivatives of zinc(II)...     

Electron Backscattered Diffraction for the Study of Matrices for Immobilization of Actinides Composed of the Murataite-Type Phases

Crystallography Reports - Electron backscattered diffraction (EBSD) has been used to analyze structures of natural minerals and artificial compounds for almost three decades. In recent years, it is...     

Assessment of Noise Exposure of Sawmill Workers in Southwest,Nigeria

Economic wood processing employs the use of industrial machines for cutting, shaping, milling, and sawing timber, thereby leading to the generation of high levels of noise. Published data from empirical studies have categorized noise as an environmental hazard of global significance. Furthermore, noise exposure limits for different industries and all the industrial machines available has not been formally established as it presently exists in developed nations around the world. Therefore, this study assessed the daily exposure of sawmills workers to noise in Southwestern Nigeria. Reconnaissance surveys were first carried out in Osun, Oyo, Ondo, Ekiti, Lagos, and Ogun States to select sawmills that were fully operational and fit for the study. Two fully functional sawmills in two cities of each State were eventually selected for data collection, making a total of 24 sawmills, while the Circular Machines (CM), Planer Machines (PM), and Band-saw Machines (BM) were the machines in each sawmill considered. Two machines each of CM, PM, and BM were considered in each sawmill, making a total of forty-eight (48) machines each of CM, PM, and BM. Sound data were collected between 7 am and 7 pm each day for six days (between Monday and Saturday) using Extech 407732 sound level meter and all stabilized measurements were taken three times at different intervals. The data collected were in three different periods: Machine No-work Period (NP_m), Machine Idle Period (IP_m), and Machine Working Period (WP_m). A two–way Analysis of Variance (ANOVA) was carried out at P < 0.05 to determine whether there is a significant difference in the sound level average before and after the break, for both the idle and working periods of the three machines considered. This was also done to determine whether there is a significant difference between the sound level average of the results collected during idle and working periods of the three machines. Noise Pollution Levels (L_np) ranged from 83.20 dB (PM) to 107.65 (BM) and 93.42 (CM and PM) – 116.00 (BM) respectively, while IP_m also gave the least noise pollution level of 95.79 dB and WP_m gave the highest level of 102.88 dB. The results revealed that all the machines’ L_np values in the working period are more than the 90 dB acceptable limit the recommendation value of 90 dB while 89.6% of CMs, 75% of PMs, and 89.6% of BM had their L_np above 90 dB in the idle period respectively. The minimum and the maximum noise dose levels for IP_m, WP_m and overall are 0.09 (BM) and 2.37 (CM), 0.50 (CM), and 4.77 (PM) and 0.69 (BM) and 6.64 (PM) respectively. The study found out that the fundamental contributing factors to the high noise levels in sawmills are poor machine maintenance, use of old and obsolete machines, poor housekeeping strategy, limited space, workers’ negligence, lack of PPE, and lack of occupational safety training. The study recommends that proper workplace practices such as use of personal protective equipment, new and modern machines, training, and occupational safety programmes be implemented in the considered sawmills.