Synthesis of poly(2,5-dimethylphenylene sulfide) through oxidative polymerization of sulfur chloride with p-xylene

Poly(2,5-dimethylphenylene sulfide) was prepared by oxidative polymerization of sulfur chloride with p-xylene using 2,3-dichloro-5,6-dicyano-p-benzoquinone (DDQ) as an oxidizing agent. The reaction proceeded efficiently under atmospheric pressure and at room temperature. The polymer formed had a high melting temperature and linear structure which was confirmed by spectroscopies. The effects of reaction time, solvent, temperature and oxidizing agent on polymerization are also discussed.     

Anion conductive block poly(arylene ether)s: synthesis, properties, and application in alkaline fuel cells

Anion conductive aromatic multiblock copolymers, poly(arylene ether)s containing quaternized ammonio-substituted fluorene groups, were synthesized via block copolycondensation of fluorene-containing (later hydrophilic) oligomers and linear hydrophobic oligomers, chloromethylation, quaternization, and ion-exchange reactions. The ammonio groups were selectively introduced onto the fluorene-containing units. The quaternized multiblock copolymers (QPEs) produced ductile, transparent membranes. A well-controlled multiblock structure was responsible for the developed hydrophobic/hydrophilic phase separation and interconnected ion transporting pathway, as confirmed by scanning transmission electron microscopic (STEM) observation. The ionomer membranes showed considerably higher hydroxide ion conductivities, up to 144 mS/cm at 80 °C, than those of existing anion conductive ionomer membranes. The durabilities of the QPE membranes were evaluated under severe, accelerated-aging conditions, and minor degradation was recognized by (1)H NMR spectra. The QPE membrane retained high conductivity in hot water at 80 °C for 5000 h. A noble metal-free direct hydrazine fuel cell was operated with the QPE membrane at 80 °C. The maximum power density, 297 mW/cm(2), was achieved at a current density of 826 mA/cm(2).     

Cyano‐Bridged MnIII?MIII Single‐Chain Magnets with MIII=CoIII,FeIII, MnIII,and CrIII

A series of isostructural cyano‐bridged Mn^III(h.s.)–M^III(l.s.) alternating chains, [Mn^III(5‐TMAMsalen)M^III(CN)₆] ? 4H₂O (5‐TMAMsalen^2?=N,N′‐ethylenebis(5‐trimethylammoniomethylsalicylideneiminate), Mn^III(h.s.)=high‐spin Mn^III, M^III(l.s.)=low‐spin Co^III, Mn? Co ; Fe^III, Mn? Fe ; Mn^III, Mn? Mn ; Cr^III, Mn? Cr ) was synthesized by assembling [Mn^III(5‐TMAMsalen)]³⁺ and [M^III(CN)₆]^3?. The chains present in the four compounds, which crystallize in the monoclinic space group C2/c, are composed of an [‐Mn^III‐NC‐M^III‐CN‐] repeating motif, for which the ‐NC‐M^III‐CN‐ motif is provided by the [M^III(CN)₆]^3? moiety adopting a trans bridging mode between [Mn^III(5‐TMAMsalen)]³⁺ cations. The Mn^III and M^III ions occupy special crystallographic positions: a C₂ axis and an inversion center, respectively, forming a highly symmetrical chain with only one kind of cyano bridge. The Jahn–Teller axis of the Mn^III(h.s.) ion is perpendicular to the N₂O₂ plane formed by the 5‐TMAMsalen tetradentate ligand. These Jahn–Teller axes are all perfectly aligned along the unique chain direction without a bending angle, although the chains are corrugated with an Mn‐N_axis‐C angle of about 144°. In the crystal structures, the chains are well separated with the nearest inter‐chain M???M distance being relatively large at 9 Å due to steric hindrance of the bulky trimethylammoniomethyl groups of the 5‐TMAMsalen ligand. The magnetic properties of these compounds have been thoroughly studied. Mn? Fe and Mn? Mn display intra‐chain ferromagnetic interactions, whereas Mn? Cr is characterized by an antiferromagnetic exchange that induces a ferrimagnetic spin arrangement along the chain. Detailed analyses of both static and dynamic magnetic properties have demonstrated without ambiguity the single‐chain magnet (SCM) behavior of these three systems, whereas Mn? Co is merely paramagnetic with S_Mn=2 and D/k_B=?5.3 K (D being a zero‐field splitting parameter). At low temperatures, the Mn? M compounds with M=Fe, Mn, and Cr display remarkably large M versus H hysteresis loops for applied magnetic fields along the easy magnetic direction that corresponds to the chain direction. The temperature dependence of the associated relaxation time for this series of compounds systematically exhibits a crossover between two Arrhenius laws corresponding to infinite‐chain and finite‐chain regimes for the SCM behavior. These isostructural hetero‐spin SCMs offer a unique series of alternating [‐Mn‐NC‐M‐CN‐] chains, enabling physicists to test theoretical SCM models between the Ising and Heisenberg limits.     

Effect of ammonium groups on the properties and alkaline stability of poly(arylene ether)‐based anion exchange membranes

Five kinds of ammonium groups functionalized partially fluorinated poly(arylene ether) block copolymer membranes were prepared for investigating the structure–property relationship as anion exchange membranes (AEMs). Consequently, the pyridine (PYR)‐modified membrane showed the highest alkaline and hydrazine stability in terms of the conductivity, water uptake, and dry weight. The chloromethylated precursor block copolymers were reacted with amines, such as trimethylamine, N‐butyldimethylamine, 1‐methylimidazole, 1,2‐dimethylimidazole, and PYR to provide the target quaternized poly(arylene ether)s. The structures of the polymers, as well as model compounds and oligomers were well characterized by ¹H NMR spectra. The obtained AEMs were subjected to water uptake and hydroxide ion conductivity measurements and stabilities in aqueous alkaline and hydrazine media. The pyridinium‐functionalized quaternized polymers membrane showed the highest alkaline and hydrazine stability with minor losses in the conductivity, water uptake, and dry weight. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 383–389     

Abnormal Li diffusion in β-LiGa by the formation of defect complex

The diffusion coefficients of Li in the NaTl-type Li intermetallic compound of β-LiGa have been measured by using a short-lived radioactive diffusion tracer. As the tracer, the α-emitting radioisotope of ⁸Li delivered as the energetic and pulsed beam from Tokai Radioactive Ion Accelerator Complex (TRIAC) was implanted into the β-LiGa compounds with the composition in the range of about 43 to 54 at.% Li. By analyzing the time-dependent yields of the α-particles measured according to the repetition cycle of the beam, the tracer diffusion coefficients were extracted over the wide range of Li composition. Abnormal composition-dependence of Li diffusion coefficients in β-LiGa was observed; the stoichiometric β-LiGa showed the highest diffusivity of Li. By referring to the composition-dependent diffusivity of Li in the iso-structural β-LiAl and β-LiIn, we could identify the abnormal diffusion of Li in very Li-poor composition of β-LiGa. The anomaly has been discussed qualitatively in terms of the formation of defect complex and the interaction between the constitutional defects.     

A Synthetic Method for Preparing 3,3-Dialkyl-1,2,3,8-tetrahydroazulen-1-one

The trimethylsilyl enol ether of l-acetylcyclohepta-1,3,5-triene was transformed to 3,3-dialkyl-1,2,3,8-tetrahydroazulen-1-one by a two-step sequence involving the Mukaiyama aldol reaction with ketones and the subsequent Nazarov cyclization.     

Synthesis of chlorophyll-a derivatives possessing (un)substituted 13-exo-methylene moiety and their optical properties

Chlorophyll-a derivatives possessing an un/mono/disubstituted methylene moiety at the 13¹-position were prepared by (un)substituted methylation of the 13-carbonyl group and successive dehydration. Substitution of the 13¹-oxo to the methylene group slightly blue-shifted electronic absorption and emission bands in a solution and decreased chemical stability to give an oxidation product cleaved at the E-ring. Further mono/disubstitution at the methylene terminal increased wavelengths of absorption and emission maxima as well as oxidative tolerance.     

Synthesis,characterization and bio-activity of a bidentate NS Schiff base of S-allyldithiocarbazate and its divalent metal complexes: X-ray crystal structures of the free ligand and its nickel(II) complex

Transition metal complexes ML₂ (2–6) [where M = Ni(II), Cu(II), Zn(II), Cd(II), Pd(II) and HL = allyl-2-(4-benzyloxyphenylmethylene)hydrazine carbodithioate (1)] have been prepared by the reaction of the ligand with metal ions in 2:1 molar ratio and characterized by physicochemical techniques and spectroscopic methods. The crystal structures of the free ligand and its nickel(II) complex 2 have been determined by X-ray diffractometry. The ligand exists in its thione tautomeric form both in solution and in the solid state. In complex 2, square-planar coordination of nickel(II) was achieved by two chelating ligand moieties coordinating through the azomethine nitrogen and the deprotonated thione sulphur atom. Based on the crystal structures of analogous dithiocarbazate species, a square-planar geometry was assumed for the copper(II) and palladium(II) complexes, and a tetrahedral coordination sphere for the zinc(II) and cadmium(II) derivatives. The in vitro bactericidal activity suggests that the palladium(II) complex is strongly active against two bacteria. The cadmium(II) complex is moderately cytotoxic with an LC₅₀ value of 409 μg/ml, but less active than gallic acid, LC₅₀ = 78 μg/ml.     

Preparation and properties of isotactic and syndiotactic poly(methyl methacrylate)s,uniform with respect to molecular weight

Highly isotactic (it-) and highly syndiotactic (st-) poly(methyl methacrylate)s (PMMAs) uniform with respect to molecular weight (stereoregular, uniform PMMAs) were isolated up to the 100mer from it- and st-PMMAs by supercritical fluid chromatography (SFC) and characterized by NMR and mass spectroscopies. Glass transition temperatures (Tg's) of the uniform it- and st-PMMAs were higher than those of the corresponding PMMAs with MWD and with similar molecular weight on average. The Tg values of the uniform it-and st-PMMAs series obeyed the relationship, Tg = Tg∞ - K/M, where M and Tg∞ denote molecular weight and Tg at infinite M, respectively. The reciprocal melting points (1/Tm) of uniform it-PMMA (degree of polymerization, DP = 28–44), obtained from methanol solutions by evaporating the solvent, increased linearly with increasing 1/DP. Extrapolation of the linear relation to 1/DP = 0 gave the Tm of it-PMMA with infinite DP; Tm∞ = 171.1°C. Thermal degradation behavior was studied by thermogravimetry and by SFC analysis of degradation products. In gel-permeation chromatography (GPC) measurements, the it-50mer eluted faster than the st-50mer. Calibration curves for it- and st-PMMAs could be obtained using series of the uniform PMMAs. The instrumental spreading factor determined using it-25mer, it-50mer, st-25mer and st-50mer for our GPC chromatograph was 0.070 ml when the volume of the sample solution was 0.003ml. GPC analysis of a mixture of the it- and st-50mers in tetrahydrofuran indicated formation of a stereocomplex in the solution, and was found quite useful to elucidate the minimum sequence length required for complex formation.