Identification of \mathrm{\ensuremath J^{\pi} = 19/2^+} and \mathrm{\ensuremath 23/2^+} isomeric states in 127Sb

The nucleus $\ensuremath {\rm ^{127}Sb}$ , which is on the neutron-rich periphery of the $\ensuremath \beta$ -stability region, has been populated in complex nuclear reactions involving deep-inelastic and fusion-fission processes with $\ensuremath {\rm {}^{136}Xe}$ beams incident on thick targets. The previously known isomer at 2325 keV in $\ensuremath {\rm {}^{127}Sb}$ has been assigned spin and parity $\ensuremath 23/2^+$ , based on the measured $\ensuremath \gamma$ - $\ensuremath \gamma$ angular correlations and total internal conversion coefficients. The half-life has been determined to be 234(12) ns, somewhat longer than the value reported previously. The 2194 keV state has been assigned $\ensuremath J^{\pi} = 19/2^+$ and identified as an isomer with $\ensuremath T_{1/2} = 14(1) {\rm ns}$ , decaying by two $\ensuremath E2$ branches. The observed level energies and transition strengths are compared with the predictions of a shell model calculation. Two $\ensuremath 15/2^+$ states have been identified close in energy, and their properties are discussed in terms of mixing between vibrational and three-quasiparticle configurations.     

A video camera system for coaxial observation of a sample with an incident soft X‐ray beam

A video camera system for observing a sample from the direction of an incident soft X‐ray beam has been developed. The sample is seen via two reflecting mirrors. The first mirror, which has a hole to allow the soft X‐ray beam to pass through, is set on the beam axis in a vacuum. The second mirror is used to cancel out the mirror inversion of the image. This camera system is used for efficient positioning of samples in a soft X‐ray beam.     

A travelling-wave beam deflector cleave-coupled to a diode laser

A new technique for scanning a diode laser beam is introduced where the beam is deflected in a current-injection-type travelling-wave beam deflector integrated with a diode laser. The deflector, which is formed outside the laser cavity, is cleave-coupled to the cavity. An anti-reflection coating on the deflector output facet suppresses the light returning to the laser. As a result, very smooth deflection of the radiation peak with low background intensity is realized in this device, while retaining high efficiency and low threshold current.     

Continuous variables quantum switch teleportation using two-mode squeezed light

We propose a novel quantum switch teleportation with a continuous variable, which can teleport a quantum state to two different receivers alternatively, using a pair of two-mode squeezed lights as the quantum switching to manipulate the transmission route. In this scheme, the EPR entangled beams shared by sender and receivers are produced by mixing a pair of two-mode squeezed lights on one beamsplitter and separating them by using a polarizing beam splitter. The teleportation capability of this system is examined by the criteria proposed by Ralph and Lam [#!ralph!#] from a small signal quantum optical point of view. Received 20 May 2002 / Received in final form 29 July 2002 Published online 24 September 2002 RID="a" ID="a"e-mail: zhangyun@crl.go.jp     

Preparation of Y2O3:Eu thin films by excimer-laser-assisted metal organic deposition

Europium-doped yttrium oxide (Y₂O₃:Eu) thin films were successfully deposited on quartz and ITO/glass substrates by excimer-laser-assisted metal organic deposition (ELAMOD) at low temperatures. The effects of laser wavelength and thermal temperature on the films’ crystallinity and photoluminescence properties were investigated. Films irradiated by an ArF laser at 80 mJ/cm² and 400–500°C were highly crystallized compared with those prepared by thermal MOD. In contrast, when the film was irradiated by a KrF laser at 500°C, no crystalline Y₂O₃:Eu was formed. The Y₂O₃:Eu film irradiated by the ArF laser at 80 mJ/cm² and 500°C showed typical PL spectra of Eu³⁺ ions with cubic symmetry and a ⁵D₀→⁷F₂ transition at ∼612 nm. The PL intensity at 612 nm was much higher for the film prepared with ELAMOD than for that prepared by the thermal-assisted process, and the photoemission intensity of the film prepared with ELAMOD strongly depended on the substrate material.     

STM/STS study of electronic states in highly underdoped Bi2212

Local density of states (LDOS) and the lattice structure of highly underdoped Bi₂Sr₂CaCu₂O_8+δ with T_c = 22 K and 30 K were investigated by a low temperature scanning tunneling microscope. The modulation structure of the Bi–O surface was strongly depressed in the highly underdoped samples. The depression was observed only in the samples subject to the strong reduction annealing process, suggesting that the strong reduction in excess oxygen could destroy the modulation structure. At a time, patch-like inhomogeneity in the gap map sometimes disappeared, indicating that the existence of excess oxygen has an important role in the patch formation. Analysis on the LDOS with various doping levels showed that there was no crossover energy, which separates a pseudogap and a superconducting gap and is proportional to T_c.     

Large transport critical currents of powder-in-tube Sr0.6K0.4Fe2As2/Ag superconducting wires and tapes

We report the achievement of transport critical currents in Sr_0.6K_0.4Fe₂As₂ wires and tapes with a T_c = 34 K. The wires and tapes were fabricated through an in situ powder-in-tube process. Silver was used as a chemical addition as well as a sheath material. All the wire and tape samples have shown the ability to transport superconducting current. Critical current density J_c was enhanced upon silver addition, and at 4.2 K, a largest J_c of ～1200 A/cm² (I_c = 9 A) was achieved for 20% silver added tapes, which is the highest in iron-based wires and tapes so far. The J_c is almost field independent between 1 T and 10 T, exhibiting a strong vortex pinning. Such a high transport critical current density is attributed to the weak reaction between the silver sheath and the superconducting core, as well as an improved connectivity between grains. We also identify a weak-link behavior from the apparent drop of J_c at low fields and a hysteretic phenomenon. Finally, we found that compared to Fe, Ta and Nb tubes, Ag was the best sheath material for the fabrication of high-performance 122 type pnictide wires and tapes.     

Playback performance of perpendicular magnetic recording tape media for over-50-TB cartridge by facing targets sputtering method

Perpendicular magnetic recording tape medium with laminated soft magnetic underlayers was successively formed on a 4.5 μm thin plastic film by the facing targets sputtering method at room temperature. The tape medium showed extremely high SNR values with sharp transitions in playback tests by a drum tester, compared to a linear format commercial tape medium. An areal density of 45.0 Gb/in.² of perpendicular tape medium was confirmed by a high-resolution contact tester. These results suggest that the perpendicular recording tape medium by the facing targets sputtering method is a promising candidate for a tape cartridge of over 50-TB.