Chelating behavior of new chelating resins derived from n-(o-hydroxybenzyl)iminodiacetic acid

The chelating behavior of a new resin prepared by polycondensation of N-(o-hydroxybenzyl) iminodiacetic acid (o-HDA) with phenol and formaldehyde, is compared with that of the monomer, with p-HDA resin and p-HDA monomer, and with Chelex-100. The order of chelate stability for the o-HDA resin is Cu(II) > Ni(II) > Zn(II) > Co(II). An unusually high stability of the o-HDA and o-HDA resin iron(III) chelates in acidic solution is attributed to the participation of the o-hydroxyl group in the coordination process.     

Polymerization of coordinated monomers. XVI. Stereoregulation in the alternating copolymerization of methyl methacrylate with styrene in the presence of metal halides

Triad cotacticities of alternating copolymers of methyl methacrylate with styrene prepared in the presence of zinc chloride, ethylaluminium sesquichloride, and ethylboron dichloride are investigated from the mechanistic point of view by means of ¹H- and ¹³C-NMR. The cotacticities from ¹H-NMR spectra are obtained accurately by using α-d-styrene in the place of styrene and by measuring the spectra on the copolymer in o-dichlorobenzene at 170°C. The relative intensities of three peaks of the splitting signal for the methoxy protons in the nonalternating copolymers obtained by the use of benzoyl peroxide in the absence of metal halides agree well with the cotacticity distribution calculated theoretically by the Lewis-Mayo mechanism with the stereoregulation following Bernoullian statistics. The splitting signals in the ¹H- and ¹³C-NMR spectra of the alternating copolymers prepared in the presence of metal halides cannot be explained by the same mechanism. The relative intensities of three peaks of the splitting signals for the methoxy protons and for the carbonyl carbon in the methyl methacrylate unit (the contents of cotactic triads centered by the methyl methacrylate unit) are not equal to those for the aromatic C₁ carbon in the styrene unit (the contents of cotactic triads centered by styrene unit). The value of f²Y - 4fxfz is not equal to zero, where fx, fy, and fz are the cosyndiotactic, coheterotactic, and coisotactic triad contents, respectively, in the alternating copolymer. Copolymers obtained in the presence of zinc chloride are not exactly equimolar alternating but always contain a methyl methacrylate unit in excess, and the relative intensities of the three peaks for the aromatic C₁ carbon change with the copolymer composition. These results are explained by a proposed mechanism: the alternating copolymerization proceeds through the homopolymerization of a ternary molecular complex composed of a metal halide, methyl methacrylate, and styrene, accompanied with the stereoregulation following first-order Markovian statistics; the increase of methyl methacrylate content in the copolymer prepared in the presence of zinc chloride is caused by the participation of the binary molecular complex composed of a metal halide and methyl methacrylate in addition to the ternary molecular complex.     

Cinnamate ester containing liquid crystalline side chain polymers

The synthesis of methacrylate esters of 4-cyanophenyl-(4-(ω-hydroxyalkyloxy)) cinnamates, with spacer lengths of 2 and 6 methylene units and the synthesis of the corresponding acrylate ester with a spacer of 2 methylene units are described. The methacrylate monomers were polymerized by free radical polymerization, both as homopolymers and as copolymers with the analogous benzoate monomer of spacer length 6. The acrylate ester could not be polymerized successfully under the same reaction conditions. Polymers were characterized by NMR spectroscopy, gel permeation chromatography, differential scanning calorimetry, and thermo-optic observations. Of the monomers prepared, only the cinnamate with a hexamethylene spacer shows a mesophase, seen on supercooling of the melt. All of the polymers prepared were liquid crystalline, with smectic behavior predominating in the polymethacrylates with the longer spacer group. A narrow nematic region is seen just below the clearing temperature with a range of 3–9°C, nematic character is increased in the copolymer series with the degree of incorporation of the cinnamate monomer with the spacer group of length 2.     

Polymerization of coordinated monomers. III. Copolymerization of acrylonitrile–zinc chloride,methacrylonitrile–zinc chloride or methyl methacrylate–zinc chloride complex with styrene

The 1:1 or 2:1 complex of acrylonitrile, methacrylonitrile, or methyl methacrylate with ZnCl₂ was copolymerized with styrene at the temperature of 0–30°C without any initiator. The structure of the copolymer from methyl methacrylate complex and styrene was examined by NMR spectroscopy. The complexes of acrylonitrile or methacrylonitrile with ZnCl₂ gave a copolymer containing about 50 mole-% styrene units. The complexes of methyl methacrylate yielded an alternating copolymer when the feed molar ratio of methyl methacrylate to styrene was small, but with increasing feed molar ratio the resulting copolymer consisted of about 2 moles of methyl methacrylate per mole of styrene. The formation of a charge-transfer complex of styrene with a monomer coordinated to zinc atom was inferred from the ultraviolet spectra. The regulation of the copolymerization was considered to be effected by the charge-transfer complex. The copolymer resulting from the 2:1 methyl methacrylate–zinc chloride complex had no specific tacticity, whereas the copolymer from the 1:1 complex was richer in coisotacticity than in cosyndiotacticity. The change of the composition of the copolymer and its specific tacticity in the polymerization of the methyl methacrylate complex is related to the structure of the complex.     

Visco-elastic properties of reentrant nematic liquid crystalline mixtures

The visco-elastic properties for binary mixtures of 4-n -hexyloxy-4′-cyanobiphenyl (6OCB) and 4-n-octyloxy-4′-cyanobiphenyl (8OCB) are investigated in detail by a light scattering technique. The mixtures exhibit a reentrant nematic (RN) phase between the smectic A (SmA) and crystal phases in the range 22.0–29.5 wt % of 6OCB. The viscosity and the elastic constant increase with cooling in both the nematic and reentrant nematic phases. It is also found that the mixtures exhibit anomalously large values of viscosity and elastic constant near the phase transition, i.e. a pretransitional phenomenon can be observed. The activation energy for viscosity is smaller in the RN phase than in the ordinary nematic phase appearing at higher temperatures, while the normalized elastic constant (defined as the ratio of the elastic constant to the square of the dielectric anisotropy) is larger. Moreover, the visco-elastic behaviour depends on the specific time during which the sample has been kept in the SmA phase. These results confirm that the SmA phase has a strong influence on the formation of molecular aggregates, which plays an important role in the reentrant phenomenon of these systems.     

Theory of ferromagnetism in Ca(1-x)La(x)B(6)

Novel ferromagnetism in Ca(1-x)La(x)B(6) is studied in terms of the Ginzburg-Landau theory for excitonic-order parameters, taking into account symmetry of the wave functions. We found that the minima of the free energy break both inversion and time-reversal symmetries, while the product of these two remains preserved. This explains various novelties of the ferromagnetism and predicts a number of magnetic properties, including the magnetoelectric effect, which can be tested experimentally.     

Crying and Behavioral Characteristics in Premature Infants

The aims of this study were to analyze 1) whether there was the relationship between the neonatal behavioral characteristics and amount of crying in premature infants at term age, and 2) what kind of difference between infants with high levels of crying and cry less on neonatal behavioral characteristics using the Neonatal Behavioral Assessment Scale (NBAS). The study participants consisted of 69 healthy low birth-weight infants who were admitted to the NICU at the Nagasaki University Hospital, Nagasaki, Japan. This study analyzed the relationship between NBAS scores measured neonatal behavioral performance and crying at term age. This study results indicate that there was significant statistical negative correlation between the amount of total daily crying and Habituation, Range of state, Regulation of state, and Autonomic stability cluster scores and some individual items scores (Response decrement to light, Response decrement to tactile of foot, Alert responsiveness, Examiner persistence, Motor maturity, Irritability, General irritability, Cuddliness, Consolability, Self-quieting activity, and State regulation). The high levels crying group also showed higher responsivity than less crying group in the items of Peak of excitement, Rapidity of build-up, Irritability and General irritability. In conclusion, neonatal behavioral characteristics such as poor inhibit discrete stimuli while asleep, hyper-responsivity and poor state regulation abilities were risk factors of high levels of crying.     

Hole transport in polymers of (N-ethylcarbazol-3-yl) methyl acrylate and methacrylate

(N-Ethylcarbazol-3-yl)methyl acrylate and methacrylate were polymerized anionically and radically. Anionically-polymerized polyacrylate using ethylmagnesium chloride-benzalacetophenone as catalyst is an isotactic rich polymer with 85% isotactic dyad. All polymers except anionically polymerized polymethacrylate showed good film forming property. Hole drift mobilities measured by the time-of-flight method at room temperature and at 5 × 10⁵ V/cm are in the following order: isotactic polyacrylate (1.0 × 10^-5 cm²/V s) > atactic polyacrylate (1.8 × 10^-6 cm²/V s) > atactic polymethacrylate (1.2 × 10^-6 cm²/V s) at 5 × 10⁵ V/cm. These results are discussed in terms of the hopping model between localized sites.     

Surface properties of styrene–ethylene oxide block copolymers

Hydrophobic–hydrophilic block copolymers were prepared by “living” anionic polymerization. They consist of polystyrene and poly(ethylene oxide) blocks, and are soluble in water. Their interfacial properties were investigated, employing aqueous solutions. The block copolymers lowered the surface tension of water in analogy with the low molecular weight surfactants such as sodium lauryl sulfate and heptaethylene oxide n-dodecyl ether. Their aqueous solutions exhibited solubilization properties differing from those of polyethylene glycol. Therefore, it is thought that the polystyrene blocks produce solubilization phenomena. In samples of the same styrene content, the precipitation temperature of a high molecular weight copolymer in water was lower than that of a low molecular weight copolymer at the same concentration in the same solvent. The surface tension and precipitation temperature of aqueous solutions seem to be influenced by molecular weight and composition.