Synthesis and adsorption properties of gold nanoparticles within pores of surface‐functional porous polymer microspheres

Mesoporous polymer microspheres with gold (Au) nanoparticles inside their pores were prepared considering their surface functionality and porosity. The Au/polymer composite microspheres prepared were characterized by transmission electron microscope (TEM), X‐ray diffraction (XRD), and Brunauer–Emmett–Teller (BET) techniques. The results showed that the adsorption of Au nanoparticles could be increased by imparting the pore structure and surface‐functional groups into the supporting polymer microspheres (in this study, poly (ethylene glycol dimethacrylate‐co‐acrylonitrile) and poly (EGDMA‐co‐AN) system). Above all, from this study, it was established that the porosity of the polymer microspheres is the most important factor that determines the distribution and adsorption amount of face‐centered cubic (fcc) Au nanoparticles in the final products. Our study showed that the continuous adsorption of Au nanoparticles with the aid of the large surface area and surface interaction sites formed more favorably the Au/polymer composite microspheres. The BET measurements of Au/poly(EGDMA‐co‐AN) composite microspheres reveals that the adsorption of Au nanoparticles into the pores kept the pore structure intact and made it more porous. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5627–5635, 2004     

Electrochemical behavior of Li intercalation processes into a Li[NixLi(1/3−2x/3)Mn(2/3−x/3)]O2 cathode

Li[Ni_xLi_(1/3−2x/3)Mn_(2/3−x/3)]O₂ (X=0.17, 0.25, 0.33, 0.5) compounds are prepared by a simple combustion method. The Rietvelt analysis shows that these compounds could be classified as having the α-NaFeO₂ structure. The initial charge-discharge and irreversible capacity increases with the decrease of x in Li[Ni_xLi_(1/3−2x/3)Mn_(2/3−x/3)]O₂. Indeed, Li[Ni_0.50Mn_0.50]O₂ compound shows relatively low initial discharge capacity of 200 mAh/g and large capacity loss during cycling, with Li[Ni_0.17Li_0.22Mn_0.61]O₂ and Li[Ni_0.25Li_0.17Mn₀.₅₈]O₂ compounds exhibit high initial discharge capacity over 245 mAh/g and stable cycle performance in the voltage range of 4.8 -2.0 V. On the other hand, XANES analysis shows that the oxidation state of Ni ion reversibly changes between Ni²⁺ and about Ni³⁺, while the oxidation state of Mn ion sustains Mn⁴⁺ during charge-discharge process. This result does not agree with the previously reported ‘electrochemistry model’ of Li[Ni_xLi_(1/3−2x/3)Mn_(2/3−x/3)]O₂, in which Ni ion changes between Ni²⁺ and NI⁴⁺. Based on these results, we modified oxidation-state change of Mn and Ni ion during charge-discharge process.     

Influence of SMA content on the electro-optical properties of polymer-dispersed liquid crystal prepared by monodisperse poly(MMA-co-SMA)/LC microcapsules

Monodisperse poly(methyl methacrylate) (PMMA) particles containing various concentrations of stearyl methacrylate (SMA) were prepared, and a liquid crystal (LC) was swollen into the particles using a solute co-diffusion method (SCM). Phase separation behaviors between the polymer and LC were monitored by utilizing an optical and a polarized microscope (OM/POM). The monodisperse LC microcapsules were then applied to a polymer-dispersed liquid crystal (PDLC), and the electro-optical properties were investigated. As a result, the threshold and driving voltages were improved when the SMA content increased. The long alkyl chains of SMA in the capsules should exist at the interface of the LC and polymer resulting in an enhancement of phase separation between the polymer and LC, which largely influences the electro-optical properties of PDLC.     

Synthesis, structure and heterogeneous catalytic activities of Cu-containing polymeric compounds: anion effect and comparison of homogeneous vs. heterogeneous catalytic activity

The structures of new polymeric compounds containing Cu(II) ions and btp (2,6-bis(N'-1,2,4-triazolyl)pyridine) ligands have been determined. The btp ligands bridge Cu(II) ions to form double zigzag chains, [Cu(ClO4)2(btp)2] 3 with perchlorate anions, and form single zigzag chains, [Cu(btp)(H2O)4](SO4).2H2O 4 with sulfate anions. The polymeric compound 3 was found to effectively catalyze the epoxide ring-opening reaction with methanol, while polymeric compound 4 was almost inactive with epoxides under the same conditions. The polymeric compound 3 showed an efficient catalytic activity and regioselective reactivity in the ring opening of epoxides and allowed reuse without a significant loss of activity through three runs with epoxides.     

Supramolecular reactor from self-assembly of rod-coil molecule in aqueous environment

We synthesized an amphiphilic coil-rod-coil triblock molecule consisting of hexa-p-phenylene as a rod block and poly(ethylene oxide) with the number of repeating units of 17 as coil blocks and investigated aggregation behavior in aqueous environment. The rod-coil molecule was observed to aggregate into discrete micelles consisting of hydrophobic disklike rod bundles encapsulated by hydrophilic poly(ethylene oxide) coils. The aromatic bundles of the micelles were demonstrated to be used as an efficient supramolecular reactor for the room temperature Suzuki cross-coupling reaction of a wide range of aryl halides, including even aryl chlorides with phenylboronic acids in aqueous environment. These results demonstrate that self-assembly of amphiphilic rod-coil molecules can provide a useful strategy to construct an efficient supramolecular reactor for aromatic coupling reaction.     

Trifluoromethyl‐Radical‐Mediated Carbonylation of Alkanes Leading to Ethynyl Ketones

The carbonylation of alkanes 1 under radical‐reaction conditions was examined by using ethynyl triflone A as the unimolecular chain‐transfer (UMCT) reagent. Good to moderate yields of ethynyl ketones 2 were prepared by means of this three‐component coupling reaction. Higher CO pressures as well as lower concentrations of triflone A improved the efficiency of the reaction over the direct addition, the latter leading to alkylated ethynes 3 . In contrast to the reaction with A , the reaction of cyclohexane ( 1a ) with allyl triflone B (= ethyl 2‐methylene‐3‐[(trifluoromethyl)sulfonyl]propanoate) in the presence of CO gave a mixture of carbonylation products, including 8a formed from two molecules each of cyclohexane, CO, and allyl triflone B .     

Intramolecular nucleophilic carbonyl trapping of alpha-ketenyl radicals by an amino group

Free-radical carbonylation of omega-alkynylamines with tributyltin hydride gives a mixture of alpha-methylene lactams and alpha-stannylmethylene lactams. Nucleophilic addition of an internal amino group to the carbonyl group of alpha-ketenyl radicals is proposed as the cyclization step. The subsequent unusual 1,4-H shift from the resulting 1-hydroxyallyl radical, followed by elimination of the beta-tributyltin radical leads to the formation of alpha-methylene lactams.