A study of corrosion on a rotating iron disk electrode

Corrosion of iron in slightly acidified sodium sulphate solutions (mainly pH 4.5) in the open air was studied with a rotating disk electrode method at room temperature.Microscopic observations of corroded iron disk surfaces in the pH 4.5 solution revealed that iron initially corrodes locally with the formation of round pits of 10–30 μm in diameter and of(0.6–1.3) × 10³ in number per apparent square centimetre followed by the U-shaped brown protective wall formation of precipitates (rust) outside the pits. Each protective wall is formed along the lines of flow of the solution adjacent to the iron surface and each pit is located near the upstream end of the wall. Steady state of corrosion sets in when the parts of surface area surrounded by the wall are completely covered with a microscopically non-porous rust film.The amount of iron in the rust film and the total amount of corrosion of iron including that in the film increase parabolically with the increase in the time of immersion. The amount of iron in the film increases in proportion to the total amount of corrosion independently of the speed of rotation of the disk electrode even in the steady state.The fraction of area of iron surface not covered with the film decreases with time and reaches a certain fixed value in the steady state: the value is smaller at higher rotational speed. The corrosion rate is proportional to the uncovered area, as the corrosion is near the steady state. The pH of the bulk solution increases as corrosion progresses.The corrosion rate of iron can be well interpreted by assuming that the rate is controlled by the diffusion of oxygen from the bulk solution to the surface of iron and that the rust film on iron impedes the diffusion of oxygen.     

The nephritogenic glycopeptide from rat glomerular basement membrane. X. Synthesis of an N-triglycosyl dipeptide and characteristics of its cis-trans isomers.

Isomers of O-alpha-D-glucopyranosyl-(1----6)-O-beta-D-glucopyranosyl- (1----6)-N-[L-aspart-1-oyl-(L-proline)-4-oyl]-alpha-D-glucopyranos ylamine have been prepared, as models for a derivative possibly present in the glomerular basement membrane of rats, by condensation of the corresponding dipeptide derivative (5) with triglycosylamine (4) in the presence of O,O-diethylcyanophosphonate, followed by deprotection of the trisaccharide-dipeptide derivative. During the deprotection process, cis- and trans-isomers containing proline were separated by silica gel column chromatography and also reversed-phase high performance liquid chromatography.     

Syntheses of 3-substituted furans via lithium di(3-furyl)cuprate—the application of lithium di(3-furyl)cuprate to the total synthesis of dendrolasin

One step syntheses of 3-substituted furans by the reactions of a new reagent, lithium di(3-furyl)cuprate $\text{1}$, with various substrates and the application of $\text{1}$ to a total synthesis of dendrolasin are described.     

Structural basis for inhibition of protein tyrosine phosphatases by Keggin compounds phosphomolybdate and phosphotungstate

Protein-tyrosine phosphatases (PTPs) constitute a family of receptor-like, and cytoplasmic enzymes, which catalyze the dephosphorylation of phosphotyrosine residues in a variety of receptors and signaling molecules. Together with protein tyrosine kinases (PTKs), PTPs are critically involved in regulating many cellular signaling processes. In this study, diverse compounds were screened for PTP inhibition and selectively screened for inhibitors with the end product inhibition properties. Among phosphate analogues and their derivatives for PTP inhibition, Keggin compounds phosphomolybdate (PM) and phosphotungstate (PT) strongly inhibited both PTP-1B and SHP-1, with K(i) values of 0.06-1.2 micromM in the presence of EDTA. Unlike the vanadium compounds, inhibition potencies of PM and PT were not significantly affected by EDTA. PM and PT were potent, competitive inhibitors for PTPs, but relatively poor inhibitors of Ser/Thr phosphatase. Interestingly, PM and PT did not inhibit alkaline phosphatase at all. The crystal structure of PTP-1B in complex with PM, at 2.0 A resolution, reveals that MoO(3), derived from PM by hydrolysis, binds at the active site. The molybdenium atom of the inhibitor is coordinated with six ligands: three oxo-ligands, two apical water molecules and a S atom of the catalytic cysteine residue. In support of the crystallographic finding, we observed that molybdenium oxides (MoO(3), MoO(2), and MoO(2)Cl(2)) inhibited PTP-1B with IC(50) in the range 5-15 micromM.     

Some vanadium(V) complexes as reagents for the photometric determination of alcohols

Vanadiuin(V) com: with an acidic hydroxy group attached to the metal form the crorrresponding.; with alcohols. These esters show a characteristic absorption at 445–480 that alcoholic hydroxy groups can be determined photometrically. The formation constant of the n-butanol esters of vanadium maltolate and 2-methyl-.S-hydroxyquinolinate Were determined in benzene or benzenechloroform (1:1). Simple methods are determined for the determination of alcohol in the concentration range 10^-1–10^-4M.     

Analysis of transient membrane protein interactions by single-molecule diffusional mobility shift assay

Various repertoires of membrane protein interactions determine cellular responses to diverse environments around cells dynamically in space and time. Current assays, however, have limitations in unraveling these interactions in the physiological states in a living cell due to the lack of capability to probe the transient nature of these interactions on the crowded membrane. Here, we present a simple and robust assay that enables the investigation of transient protein interactions in living cells by using the single-molecule diffusional mobility shift assay (smDIMSA). Utilizing smDIMSA, we uncovered the interaction profile of EGFR with various membrane proteins and demonstrated the promiscuity of these interactions depending on the cancer cell line. The transient interaction profile obtained by smDIMSA will provide critical information to comprehend the crosstalk among various receptors on the plasma membrane.Subject terms: Fluorescence imaging, Super-resolution microscopy, Single-molecule biophysics     

Photoactivation of pheophorbide a induces a mitochondrial-mediated apoptosis in Jurkat leukaemia cells

The mechanism of cell death by pheophorbide a (Pba) which has been established to be a potential photosensitizer was examined in experimental photodynamic therapy (PDT) on Jurkat cells, a human lymphoid tumor cell line. In 30-60 min after irradiation, Pba treated cells exhibited apoptotic features including membrane blebbing and DNA fragmentation. Pba/PDT caused a rapid release of cytochrome c from mitochondria into the cytosol. Sequentially, activation of caspase-3 and the cleavage of poly ADP-ribose polymerase (PARP) were followed. Meanwhile, no evidence of activation of caspase-8 was indicated in the cells. In experiments with caspase inhibitors, it was found that caspase-3 alone was sufficient initiator for the Pba-induced apoptosis of the cells. Pba specific emission spectra were confirmed in the mitochondrial fraction and the light irradiation caused a rapid change in its membrane potential. Thus, mitochondria were entailed as the crucial targets for Pba as well as a responsible component for the cytochrome c release to initiate apoptotic pathways. Taken together, it was concluded that the mode of Jurkat cell death by Pba/PDT is an apoptosis, which is initiated by mitochondrial cytochrome c release and caspase-3-pathways.     

Influence of SMA content on the electro-optical properties of polymer-dispersed liquid crystal prepared by monodisperse poly(MMA-co-SMA)/LC microcapsules

Monodisperse poly(methyl methacrylate) (PMMA) particles containing various concentrations of stearyl methacrylate (SMA) were prepared, and a liquid crystal (LC) was swollen into the particles using a solute co-diffusion method (SCM). Phase separation behaviors between the polymer and LC were monitored by utilizing an optical and a polarized microscope (OM/POM). The monodisperse LC microcapsules were then applied to a polymer-dispersed liquid crystal (PDLC), and the electro-optical properties were investigated. As a result, the threshold and driving voltages were improved when the SMA content increased. The long alkyl chains of SMA in the capsules should exist at the interface of the LC and polymer resulting in an enhancement of phase separation between the polymer and LC, which largely influences the electro-optical properties of PDLC.     

Selective Formation of Spinel Iron Oxide in Thin Films by Complexing Agent-Assisted Sol-Gel Processing

The structure of iron oxide was controlled by regulating the hydrolytic polymerization of aquo iron complexes with organic polydentate ligands such as diols. Iron oxides were prepared by calcining the precursor polymers obtained from iron nitrate nonahydrate and diols. When the diols were 1,2-pentanediol, 1,2-hexanediol and 1,2-octanediol, α-Fe₂O₃ with corundum structure appeared exclusively or as the main crystalline phase, in spite of the amount of diol used and the calcination temperature. In the case of 1,2-decanediol and 1,2-dodecanediol, when five moles of the diols were used to one mole of iron nitrate and the calcination temperatures were below 400°C, ψ-Fe₂O₃ with spinel structure appeared as the main phase and, when less than five moles of the diols were used, α-Fe₂O₃ appeared exclusively or as the main phase, irrespective of the calcination temperature. This tendency was also observed in thin films. Thus, a transparent magnetic film composed of γ-Fe₂O₃ could be prepared by applying a benzene solution of the iron polymer, obtained with 5 equivalents of 1,2-decanediol, on quartz and calcining the gel film at 350°C.