Effects of in situ thermal annealing on the structural, optical, and electrical properties in Hg0.7Cd0.3Te epilayers grown on CdTe buffer layers

Scanning electron microscopy (SEM), Fourier transform infrared (FTIR) transmission, and Hall effect measurements were performed to investigate the structural, optical, and electrical properties of as-grown and in situ-annealed Hg_0.7Cd_0.3Te epilayers grown on CdTe buffer layers by using molecular beam epitaxy. After the Hg_0.7Cd_0.3Te epilayers had been annealed in a Hg-cell flux atmosphere, the SEM images showed that the surface morphologies of the Hg_0.7Cd_0.3Te thin films were mirror-like with no indication of pinholes or defects, and the FTIR spectra showed that the transmission intensities had increased in comparison to that of the as-grown Hg_0.7Cd_0.3Te epilayer. Hall-effect measurements showed that n-Hg_0.7Cd_0.3Te epilayers were converted to p-Hg_0.7Cd_0.3Te epilayers. These results indicate that the surface, optical, and electrical properties of the Hg_1 − xCd_xTe epilayers are improved by annealing and that as-grown n-Hg_1 − xCd_xTe epilayers can be converted to p-Hg_1 − xCd_xTe epilayers by in situ annealing.     

Enhancement of CO2 sorption uptake on hydrotalcite by impregnation with K2CO3

The awareness of symptoms of global warming and its seriousness urges the development of technologies to reduce greenhouse gas emissions. Carbon dioxide (CO(2)) is a representative greenhouse gas, and numerous methods to capture and storage CO(2) have been considered. Recently, the technology to remove high-temperature CO(2) by sorption has received lots of attention. In this study, hydrotalcite, which has been known to have CO(2) sorption capability at high temperature, was impregnated with K(2)CO(3) to enhance CO(2) sorption uptake, and the mechanism of CO(2) sorption enhancement on K(2)CO(3)-promoted hydrotalcite was investigated. Thermogravimetric analysis was used to measure equilibrium CO(2) sorption uptake and to estimate CO(2) sorption kinetics. The analyses based on N(2) gas physisorption, X-ray diffractometry, Fourier transform infrared spectrometry, Raman spectrometry, transmission electron microscopy, scanning electron microscopy, and energy dispersive X-ray spectroscopy were carried out to elucidate the characteristics of sorbents and the mechanism of enhanced CO(2) sorption. The equilibrium CO(2) sorption uptake on hydrotalcite could be increased up to 10 times by impregnation with K(2)CO(3), and there was an optimal amount of K(2)CO(3) for a maximum equilibrium CO(2) sorption uptake. In the K(2)CO(3)-promoted hydrotalcite, K(2)CO(3) was incorporated without changing the structure of hydrotalcite and it was thermally stabilized, resulting in the enhanced equilibrium CO(2) sorption uptake and fast CO(2) sorption kinetics.     

Complement activation by sulfonated poly(ethylene glycol)-acrylate copolymers through alternative pathway

Previously, novel poly(ethylene glycol) (PEG) and sulfonated PEG acrylate (PEG-SO₃A/OA) copolymers were prepared as coating and/or blending materials for biomedical applications. Surfaces modified with copolymers exhibited increased anti-coagulation properties and decreased plasma adsorption level due to increased hydrophilic properties and reorientation characteristics of PEG/PEG-SO₃A chains in water phase. As continuation study, anti-complement effects of PEG-SO₃/OA copolymers were investigated in vitro, and compared with those of low-density polyethylene (LDPE) and PEG/OA. C3 activation by PEG-SO₃/OA samples was lower than that by PEG/OA samples, which was attributed to decreased surface nucleophile level of samples. PEG-SO₃/OA samples increased inhibition of Bb production, resulting in decreased C5 activation. Owing to reduced activations of C3 and C5, PEG-SO₃/OA samples markedly decreased SC5b-9 levels in plasma.     

The preparation of nanophase tungsten carbide powder with zeolite-X catalysts

The reduction–carburization of tungsten trioxide (WO₃) under carbon monoxide flow was studied in the temperature range of 300–750 °C. The reduction–carburization of WO₃ was improved by mechanically mixing with zeolite-HX, -NaX and -KX. The interaction between cation in zeolite-X and oxygen in WO₃ affected the improvement of the reduction–carburization of WO₃ to WC. Moreover, the improved reduction–carburization of WO₃ could lead to the decrease of reaction temperature. Because the particle size of WC is in contact with a reaction temperature, the nanophase WC can be prepared at low temperature. In particular, the particle size of WC was controlled by reaction temperature. The particle sizes of produced WC at 550, 650 and 700 °C were 25, 50 and 100 nm respectively.     

Determination and pharmacokinetics of [6]-gingerol in mouse plasma by liquid chromatography-tandem mass spectrometry

This study describes the development of a rapid and sensitive high‐performance liquid chromatography–electrospray ionization tandem mass spectrometry (LC‐MS/MS) assay for the quantification of [6]‐gingerol in mouse plasma and application to a pharmacokinetic study after dose ranging in mice. The assay involved a protein precipitation step with acetonitrile and an isocratic elution using a mobile phase consisting of acetonitrile and water containing 0.1% formic acid (80:20 v/v). The multiple reaction monitoring was based on the transition of m/z = 277.2 → 177.1 for [6]‐gingerol and 294.2 → 137.1 for nonivamide (internal standard). The assay was validated to demonstrate the specificity, linearity, recovery, accuracy, precision and stability. The calibration curves were linear over the wide concentration range of 10–10,000 ng/mL (r ≥ 0.9988). The lower limit of quantification was 10 ng/mL using a small volume of mouse plasma (20 μL). The method was successfully applied to a pharmacokinetic study in mice after intravenous injection of [6]‐gingerol at 1.5, 3 and 6 mg/kg doses. The pharmacokinetics of [6]‐gingerol were linear over the dose range studied as demonstrated by the linear increase in area under the concentration‐time curve (AUC_inf) with no significant change in the systemic clearance (Cl_s), volume of distribution (V_ss) and elimination half‐life (t_1/2) as a function of dose. Copyright © 2011 John Wiley & Sons, Ltd.     

The application of Py-GC/MS for the catalytic upgrading of oil separated from summer food waste leachate

The catalytic cracking of oil fractions separated from summer food waste leachate was investigated over BEA zeolite and Al-SBA-15 catalysts. In this study, a mixture of food waste oil fractions and catalyst was directly introduced to pyrolysis gas chromatography/mass spectrometry (Py-GC/MS), with the resulting vapor phase products being simultaneously analyzed. Various acid compounds, including oleic acid, produced by the non-catalytic pyrolysis of food waste leachate were reformed into valuable compounds, such as oxygenates, hydrocarbons, and aromatics. The BEA zeolite catalyst showed higher selectivity for hydrocarbon compounds, especially aromatics, within the gasoline range due to its superior cracking ability originating from its highly acidic sites. Conversely, the cracking performance of the Al-SBA-15 catalyst, possessing mild acidic sites, was lower than that of the BEA zeolite. Increasing the amount of Al-SBA-15 catalyst enhanced the cracking activity and resulted in higher selectivity for hydrocarbons.     

Surface functionalization of multi‐walled carbon nanotubes through surface‐initiated atom transfer radical polymerization of glycidyl methacrylate

Herein, we report the fabrication of glycidyl methacrylate (GMA) polymeric conjugates of shortened multi‐walled carbon nanotubes (sMWCNT). The synthesis method involves the attachment of initiator on the surface of nanotubes followed by surface initiated atom transfer radical polymerization (SI‐ATRP) of GMA from the initiator‐bound sMWCNT surface. This is achieved by the procedure consisting of three important steps: introduction of amino groups onto the sMWCNT and attachment of polymerization initiator, 2‐bromo‐2‐methylpropinonyl bromide, and polymerization of GMA. The structure and properties of the resultant polymeric conjugates were characterized by Fourier transform infrared (FT‐IR) spectroscopy, Thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), X‐ray diffraction (XRD), atomic force microscopy (AFM), transmission electron microscopy (TEM) and SEM. The FT‐IR analysis of polymeric conjugates shows infrared (IR) peaks characteristic of GMA. AFM, TEM and SEM images clearly show the formation of poly(glycidyl methacrylate)(PGMA) polymer on sMWCNT surface. Copyright © 2009 John Wiley & Sons, Ltd.