The influence of fast neutron irradiation on the IR optical properties of NTD-Silicon

Optical IR measurements of NTD-Si are presented for different fast neutron doses. The exponential dependence of the divacancy concentration and the near-edge absorption as a function of fast neutron flux is reported. Silicon one-phonon absorption, caused by the irradiation, is also increasing with the rising percentage of fast neutrons in the flux     

Enzyme Promiscuity as a Remedy for the Common Problems with Knoevenagel Condensation

A new protocol based on lipase-catalyzed tandem reaction toward α,β-enones/enoesters is presented. For the synthesis of the desired products the tandem process based on enzyme-catalyzed hydrolysis and Knoevenagel reaction starting from enol acetates and aldehyde is developed. The relevant impact of the reaction conditions including organic solvent, enzyme type, and temperature on the course of the reaction was revealed. It was shown that controllable release of the active methylene compound from the corresponding enol carboxylate ensured by enzymatic reaction diminishes significantly the formation of the unwanted co-products. Furthermore, this protocol was extended by including a second tandem chemoenzymatic transformation engaging various aldehyde precursors. After a careful optimization of the reaction conditions, the target products were obtained with yields up to 86 % and with excellent E/Z-selectivity.     

Focusing of Fe3O4 nanoparticles using a rotating magnetic field in various environments

The paper shows the application of a new method – Magnetic Nanoparticles Focusing 3D, MNF-3D – for focusing of magnetic nanoparticles at any point in a three-dimensional space between the rotating magnet system. The results of focusing process of nanoparticles in water, human blood, human serum and polyurethane sponge are presented. Additionally, blood flow was also considered. The effectiveness of nanoparticle focusing was monitored optically and quantitatively by electron spin resonance method. The method enabled focusing of magnetic nanoparticles within a few minutes in different environments. A good efficiency of focusing process was observed for all the samples.     

Free Radicals, Salicylic Acid and Mycotoxins in Asparagus After Inoculation with Fusarium proliferatum and F. oxysporum

Electron paramagnetic resonance was used to monitor free radicals and paramagnetic species like Fe, Mn, Cu generation, stability and status in Asparagus officinalis infected by common pathogens Fusarium proliferatum and F. oxysporum. Occurrence of F. proliferatum and F. oxysporum, level of free radicals and other paramagnetic species, as well as salicylic acid and mycotoxins content in roots and stems of seedlings were estimated on the second and fourth week after inoculation. In the first term free and total salicylic acid contents were related to free radicals level in stem (P?=?0.010 and P?=?0.033, respectively). Concentration of Fe(3+) ions in porphyrin complexes (g?=?2.3, g?=?2.9) was related to the species of pathogen. There was no significant difference between Mn(2+) concentrations in stem samples; however, the level of free radicals in samples inoculated with F. proliferatum was significantly higher when compared to F. oxysporum.     

N-(Diphenoxyphosphoryl)Succinimide: Synthesis and Reaction with Alkoxides

Abstract

Reaction of succinimide with diphenylchlorophosphate in the presence of lithium bis(trimethylsilyl)amide followed by aqueous work-up led to the formation of amidophosphate 3. The same reaction performed in the presence of sodium hydride yield N-(diphenylphosphoryl)succinimde 4, which undergoes nucleophilic ring opening with sodium alkoxides resulted in the formation of phosphoroamidate analogues 5 a-d in good yields.

GRAPHICAL ABSTRACT      

Radionuclides and heavy metal concentrations as complementary tools for studying the impact of industrialization on the environment

The aim of the study was to determine whether using chemical and radiochemical analysis of lake sediments can highlight changes in the climate. Also it was studied whether human impact on the environment can be observed and to what extent such changes are in agreement with historical data. Samples of 16 cm thick sediment cores from the Smreczynski Staw Lake were collected and divided into 1 cm thick sub-samples. The samples were air dried and homogenized. The quantitative analysis of Fe, Mn, Zn, Cr, Cu, Ni, Cd, and Pb in the digested sediment samples was made by using atomic absorption spectrometry. Simultaneously, the radioactivity of ¹³⁷Cs using gamma spectrometry and ²¹⁰Pb_uns using alpha spectrometry, were measured for sediment layer dating. Results showed that iron concentration was in the range 0.3–over 1 % (w/w), and zinc 0.01–0.05 % (w/w). Lesser concentrations were found for copper 18.37–43.6 ppm, manganese 37.5–50.7 ppm, lead 146.1–432 ppm, chromium 12.3–37.4 ppm, nickel 3.1–10.8 ppm and cadmium 0.9–34.6 ppm. Changes in ¹³⁷Cs radioactivity was in the range of 89 ± 11 to 865 ± 62 (Bq kg^?1). Sediments composition can accurately reflect (in terms of time and to what extent) air pollution and natural geo-chemical processes in the environment. However, the choice of the analysed object is crucial in this respect. The Smreczynski Staw Lake, due to its location in the mountains and hydrological situation, proved to be very useful for providing undisturbed analytical samples.     

Non-denaturating isoelectric focusing gel electrophoresis for uranium–protein complexes quantitative analysis with LA-ICP MS

A non-denaturating isoelectric focusing (ND-IEF) gel electrophoresis protocol has been developed to study and identify uranium (U)–protein complexes with laser ablation–inductively coupled plasma mass spectrometry (LA-ICP MS) and electrospray ionization mass spectrometry (ESI-MS). The ND-IEF-LA-ICP MS methodology set-up was initiated using in vitro U–protein complex standards (i.e., U–bovine serum albumin and U–transferrin) allowing the assessment of U recovery to 64.4?±?0.4 %. This methodology enabled the quantification of U–protein complexes at 9.03?±?0.23, 15.27?±?0.36, and 177.31?±?25.51 nmol U L^?1 in digestive gland cytosols of the crayfish, Procambarus clarkii, exposed respectively to 0, 0.12, and 2.5 μmol of waterborne depleted U L^?1 during 10 days. ND-IEF-LA-ICP MS limit of detection was 19.3 pmol U L^?1. Elemental ICP MS signals obtained both in ND-IEF electropherograms and in size exclusion chromatograms of in vivo U–protein complexes revealed interactions between U- and Fe- and Cu-proteins. Moreover, three proteins (hemocyanin, pseudohemocyanin-2, and arginine kinase) out of 42 were identified as potential uranium targets in waterborne-exposed crayfish cytosols by microbore reversed phase chromatography coupled to molecular mass spectrometry (µRPC-ESI-MS/MS) after ND-IEF separation.

Effect of Polythiophene Content on Thermomechanical Properties of Electroconductive Composites

The thermal, mechanical and electrical properties of polymeric composites combined using polythiophene (PT) dopped by FeCl₃ and polyamide 6 (PA), in the aspect of conductive constructive elements for organic solar cells, depend on the molecular structure and morphology of materials as well as the method of preparing the species. This study was focused on disclosing the impact of the polythiophene content on properties of electrospun fibers. The elements for investigation were prepared using electrospinning applying two substrates. The study revealed the impact of the substrate on the conductive properties of composites. In this study composites exhibited good thermal stability, with T₅ values in the range of 230–268 °C that increased with increasing PT content. The prepared composites exhibited comparable PA T_g values, which indicates their suitability for processing. Instrumental analysis of polymers and composites was carried out using Fourier Transform Infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), dynamic mechanical thermal analysis (DMTA) and scanning electron microscopy (SEM).     

Preparation and dielectric properties of the lead-free BaFe<Subscript>1/2</Subscript>Nb<Subscript>1/2</Subscript>O<Subscript>3</Subscript> ceramics obtained from mechanically triggered powder

In the paper the influence of mechanical activation of the powder on the final dielectric properties lead-free Ba(Fe_1/2Nb_1/2)O₃ (BFN) ceramic was examined. The BFN ceramics were obtained by 3-steps route. Firstly, the substrates were pre-homogenized in a planetary ball mill. Than, the powder was activated in vibratory mill (the shaker type SPEX 8000 Mixer Mill) for different duration between 25 h and 100 h. The influence of the milling time on the BFN powder was monitored by X-ray diffraction. The diffraction data confirmed that the milling process of the starting components is accompanied by partial synthesis of the BFN materials. The longer of the high-energy milling duration the powders results in increasing the amount of amorphous/nanocrystalline content. The mechanically activated materials were sintered in order to obtain the ceramic samples. During this temperature treatment the final crystallisation of the powder appeared what was confirmed by XRD studies. The performed dielectric measurements have revealed the reduction of the dielectric loss of the BFN ceramics compared to materials obtained by classic methods.