Hetero Diels-Alder reactions (HDAR) of α,α′-dioxothiones on solid support

Solid-supported α,α′-dioxothiones are easily obtained starting from β-ketoester modified Wang and hydroxymethylated polystyrene resins. The hetero Diels-Alder reactions (HDAR) of these species, used either as electron-poor dienes or dienophiles, followed by a simple cleavage of the products from the resin by trans-esterification with sodium methoxide, allowed the isolation of the desired cycloadducts in overall yields up to 90%.     

Facile oxidative conversion of alcohols to esters using molecular iodine

A simple, efficient, and high-yield procedure for the oxidative conversion of alcohols to various types of esters and ketones, with molecular iodine and potassium carbonate was successfully carried out.     

Selective spectrophotometric determination of palladium(II) with 2(5-nitro-2-pyridylazo)-5-(N-propyl-N-3-sulfopropylamino)phenol(5-NO(2).PAPS) and tartaric acid with 5-NO(2).PAPS-niobium(V) complex

Spectrophotometric determinations of palladium(II) and tartaric acid were respectively investigated by using the color reactions between 2(5-nitro-2-pyridylazo)-5-(N-propyl-N-3-sulfopropylamino)phenol(5-NO₂.PAPS) and palladium(II) in strong acidic media, and between 5-NO₂.PAPS, niobium(V) tartaric acid in weak acidic media. The calibration graphs were linear in the range of 0–25 μg/10 ml palladium(II), with an apparent molecular coefficient () of 6.2×10⁴ l mol⁻¹ cm⁻¹ at 612 nm, and 0–23 μg/10 ml tartaric acid with =1.08×10⁶ l mol⁻¹ cm⁻¹ at 612 nm, respectively. The proposed methods were selective and sensitive in comparison with other chelating pyridylazo dyes–palladium(II) or metavanadic acid–tartaric acid method, and the effect of foreign ions such as copper(II) was negligible for the assay of palladium(II) with 5-NO₂.PAPS.     

Diel Cycles of DNA Damage and Repair in Eggs and Larvae of Northern Anchovy, Engraulis mordax, Exposed to Solar Ultraviolet Radiation

Abstract— Damage from UVB radiation (280–320 nm) in the form of cyclobutane pyrimidine dimers (CPD) in DNA and the capacity for their repair were measured in newly spawned eggs and yolk-sac larvae of northern anchovy, Engraulis mordax, exposed to natural diel cycles of sunlight. The CPD were measured by a newly developed chemiluminescent immunoblot assay capable of measuring CPD in samples as small as 50 ng DNA. Eggs and yolk-sac larvae exposed to full irradiance levels died. At lower dose rates, equivalent to deeper more natural locations in the water column, there was a diel cycle of dimer concentration that tracked solar intensity. This diel cycle was due to the interaction of damage and repair processes. Repair of CPD in anchovy eggs and larvae could be attributed to true photodependent repair that could be stopped by moving samples into the dark. The CPD present at sunset remained until the following morning. The diel cycles of damage and repair were maintained over at least 4 days without a long-term upward or downward trend in dimer concentration. This indicates that at the UVB doses used for these experiments, there was no long-term accumulation of CPD nor an induction of increased repair capacity. Unhatched embryos spawned in the dark also exhibited a strong photorepair response, suggesting that photolyase expression was innate and not dependent on previous light exposure. The diel cycle observed here indicates that, at least for northern anchovy, the CPD concentration at the time of sampling is a good indicator of dose rate but a poor indicator of cumulative dose (i.e. late afternoon samples have the highest cumulative dose but relatively low CPD concentrations). The CPD immunoassay described here has the required sensitivity for measuring DNA damage in wild populations of ichthyoplankton exposed to natural sunlight. These results will guide the collection and interpretation of field data on natural levels of CPD in wild larvae collected at different depths and times of the day.     

Excess Heat Capacity in Yttria Stabilized Zirconia

The heat capacity of 9.70 and 11.35 mol% yttria stabilized zirconia ((ZrO₂)_1–x(Y₂O₃)_x; x=0.0970, 0.1135) was measured by adiabatic calorimetry between 13 and 300 K, and some thermodynamic functions were calculated and given in a table. A large excess heat capacity extending from the lowest temperature to room temperature with a broad maximum at about 75 K was found in comparison with the heat capacity calculated from those of pure zirconia and yttria on the basis of simple additivity rule. The shape of the excess heat capacity is very similar to the Schottky anomaly, which may be attributed to a softening of lattice vibration. The amount of the excess heat capacity decreased with increasing yttria doping, while the maximum temperature did not vary. The relationships among the excess heat capacity, defect structure and interatomic force constants, and also the role of oxygen vacancy were discussed.This revised version was published online in November 2005 with corrections to the Cover Date.     

Semi-micro size-exclusion chromatography: Molecular-weight measurement of poly (ethylene terephthalate) and separation of oligomers and prepolymers

Summary Several polystyrene gels of different pore sizes were packed into a 500 mm×2.1 mm I.D. column. Semi-micro size-exclusion chromatography (SEC) using these columns was carried out with a system consisting of a triple piston pump, a micro loop injector and a flow cell with 1.0-μl cell volume constructed for semi-micro HPLC, because the dead volume of the injector and the cell volume of flow cell for conventional HPLC caused a significant loss in column efficiency. The effects of sample amount, injection volume and mobile phase flow rate on column efficiency and retention volume were examined and the optimized operational variables of the sample amount (below 500 μg), the injection volume (less than 15 μl) and the flow rate range (30–70 μl/min) determiend for semi-micro SEC. Oligostyrene, epoxy resin, phenol-formaldehyde resin and phthalates were analyzed by the optimized semi-micro SEC system under the given conditions. In addition, molecular weight distribution of four different poly(ethylene terephthalate) films was successfully measured by using a mixture of chloroform and hexafluoroisopropanol as the eluent.     

Liquid—liquid extraction and determination of uranium(IV) with 2,6-diacetylpyridine bis(benzoylhydrazone)

2,6-Diacetylpyridine bis(benzoylhydrazone) (H₂DPBH) is proposed as a ligand for the extraction of uranium(VI). Complete extraction from aqueous solutions into dichloromethane is achieved with a ligand/metal mole ratio of < for 10^?5?10^?4 M uranyl ion. Potentiometric measurements indicate that the extracted species is UO₂ (DPBH). Uranium can be determined in the extract by spectrophotometric measurements at 420 nm and by differentail pulse polarography (E_p = ?0.67 V) with tetraethylammonium bromide as supporting electrolyte. For both methods, the detection limit is about 2 × 10^?6 M in the extract.