Water‐stable copolymers containing isocyanate moiety protected by hydrophobic styrene segment and their reaction with amines

Reactive isocyanate groups were protected and stabilized by the hydrophobic styrene segment and acquired high tolerance toward water. Copolymers containing isocyanate groups were synthesized by a radical copolymerization of 2‐propenyl isocyanate (2PI) and styrene (St). The stability of the obtained copolymers on water was examined to find that isocyanate groups were protected by the hydrophobic polystyrene segment and were stable on water and these isocyanates reacted with primary amines including amino acids to form urea selectively on water. Primary amines with a higher octanol‐water partition coefficient or smaller steric hindrance were more reactive to the isocyanate groups in the side chain of the copolymer. The protection of reactive isocyanate groups using the hydrophobic styrene segment did not give side products which are produced in the usual chemical protection/deprotection process. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1934–1940     

Synthesis,crystal structure and properties of a quaternary oxide with a new structure type,BiGaTi4O11

A new quaternary oxide, BiGaTi₄O₁₁ (bismuth gallium tetratitanium undecaoxide), was prepared by heating a mixture of the binary oxides at 1373 K in air. BiGaTi₄O₁₁ melts at 1487 K and prismatic single crystals were obtained from a sample melted at 1523 K and solidified by furnace cooling. The structure of BiGaTi₄O₁₁ was analyzed using single‐crystal X‐ray diffraction to be of a new type that crystallized in the space group Cmcm. A Bi³⁺ site is coordinated by nine O^2? anions, and three oxygen‐coordinated octahedral sites are statistically occupied by Ga³⁺ and Ti⁴⁺ cations. A relative dielectric constant of 46 with a temperature coefficient of 57 ppm K^?1 in the temperature range 297–448 K was measured for a polycrystalline ceramic sample at 150 Hz–1 MHz with a dielectric loss tan δ of less than 0.01. Electrical resistivities measured at 1073 K by alternating‐current impedance spectroscopic and direct‐current methods were 1.16 × 10^?4 and 1.14 × 10^?4 S cm^?1, respectively, which indicates that electrons and/or holes were conduction carriers at high temperature. The optical band gap estimated by the results of diffuse reflectance analysis was 2.9–3.0 eV, while the band gap obtained from the activation energy for electrical conduction was 3.5 eV.     

Copolymerization of 2‐isothiocyanatoethyl methacrylate and 2‐hydroxyethyl methacrylate or methacrylic acid based on a nucleophile‐tolerant property of the isothiocyanato group

Radical copolymerizations of 2‐isothiocyanatoethyl methacrylate (ITEMA) and 2‐hydroxyethyl methacrylate (HEMA) or methacrylic acid (MAA) were examined, and fundamental properties of the obtained copolymers were investigated. The copolymerizations of various ITEMA/HEMA or ITEMA/MAA compositions proceeded effectively in THF or DMF by using 2,2′‐azobisbutyronitrile (AIBN) as an initiator, keeping the isothiocyanato groups and hydroxyl or carboxyl groups unchanged. Glass transition temperatures (T_g)s of poly(ITEMA‐co‐HEMA)s ranged from 68 to 100 °C, and they were thermally stable up to 200 °C. Meanwhile, T_gs of poly(ITEMA‐co‐MAA)s (ITEMA/MAA = 91/9, 76/24) were determined to be 91 and 109 °C, respectively. However, poly(ITEMA‐co‐MAA)s were thermally unstable, and significant weight loss was observed around 180 °C, which may be due to an addition of carboxyl groups to isothiocyanato groups followed by an elimination of COS to form amide structure in the copolymers. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5221–5229     

Radical cation and dication of fluorene fully annelated with bicyclo[2.2.2]octene units: importance of the quinoidal resonance structure in the cationic fluorene

Fluorene 1 fully annelated with bicyclo[2.2.2]octene units was newly synthesized and oxidized to stable cationic species. The structure of radical cation salt 1(.+)SbCl(6)(-) was determined by X-ray crystallography, while the first fluorene dication 1(2+) was characterized by (1)H and (13)C NMR at -80 degrees C. Combined with the results of theoretical calculations, an important contribution of a quinoidal structure to the resonance hybrid was demonstrated in both 1(.+) and 1(2+). [structure: see text]     

A rapid and sensitive analysis of diphenylarsinic acid in water by gas chromatography/mass spectrometry.

A rapid and sensitive analytical method using pentafluorothiophenol (PFTP) derivatization was applied to detect diphenylarsinic acid (DPAA) in water. In this study, the optimum derivatization conditions, such as acid concentration, reaction time and reaction temperature, were investigated to develop a suitable procedure for DPAA determination. After extracting the derivatives into benzene, the determination was carried out by gas chromatography/mass spectrometry (GC/MS) with selected ion monitoring (SIM). The detection limit of the method was 9.4 microg/l, and the overall recoveries obtained from real environmental samples were 88.9 - 104.7% and coefficient variations were 5.1 - 13.9%.     

Analysis of water molecules around GTP in Hras-GTP complex and GDP in Hras-GDP complex by molecular dynamics simulations

We investigate the structures of the Hras-GTP and the Hras-GDP complexes in water solvents in order to understand the mechanism of GTP hydrolysis in the Hras-GTP complex. We performed MD simulations of these complexes in order to study the positions and the orientations of water molecules around the guanosine nucleotides. Using trajectories we calculated the angular distribution of water molecules around the most distant phosphorus from guanosine in our previous work. It was shown that water molecules are distributed evenly in GTP, although unevenly in GDP. This suggests that the trigger of GTP hydrolysis is possibly the attack of water molecule to γ?phosphate from the appropriate direction. In this paper, in order to investigate the role of water molecules in GTP hydrolysis in detail, we calculate the orientation of water molecules. The distribution of the orientation is different between GTP and GDP. In order to investigate the cause of this difference, we examine the hydrogen bonds between water molecules and oxygen atom of the most distant phosphate from guanosine. We find that these hydrogen bonds are formed. We also find that the oxygen atom of hydrogen bond is determined by the position of the water molecule of hydrogen bond.     

Effects of heme on the thermal stability of mesophilic and thermophilic cytochromes c: comparison between experimental and theoretical results

We have recently proposed a measure of the thermal stability of a protein: the water-entropy gain at 25?°C upon folding normalized by the number of residues, which is calculated using a hybrid of the angle-dependent integral equation theory combined with the multipolar water model and the morphometric approach. A protein with a larger value of the measure is thermally more stable. Here we extend the study to analyses on the effects of heme on the thermal stability of four cytochromes c (PA c(551), PH c(552), HT c(552), and AA c(555)) whose denaturation temperatures are considerably different from one another despite that they share significantly high sequence homology and similar three-dimensional folds. The major conclusions are as follows. For all the four cytochromes c, the thermal stability is largely enhanced by the heme binding in terms of the water entropy. For the holo states, the measure is the largest for AA c(555). However, AA c(555) has the lowest packing efficiency of heme and the apo polypeptide with hololike structure, which is unfavorable for the water entropy. The highest stability of AA c(555) is ascribed primarily to the highest efficiency of side-chain packing of the apo polypeptide itself. We argue for all the four cytochromes c that due to covalent heme linkages, the number of accessible conformations of the denatured state is decreased by the steric hindrance of heme, and the conformational-entropy loss upon folding becomes smaller, leading to an enhancement of the thermal stability. As for the apo state modeled as the native structure whose heme is removed, AA c(555) has a much larger value of the measure than the other three. Overall, the theoretical results are quite consistent with the experimental observations (e.g., at 25?°C the α-helix content of the apo state of AA c(555) is almost equal to that of the holo state while almost all helices are collapsed in the apo states of PA c(551), PH c(552), and HT c(552)).     

Characteristics of train noise in above-ground and underground stations with side and island platforms

Railway stations can be principally classified by their locations, i.e., above-ground or underground stations, and by their platform styles, i.e., side or island platforms. However, the effect of the architectural elements on the train noise in stations is not well understood. The aim of the present study is to determine the different acoustical characteristics of the train noise for each station style. The train noise was evaluated by (1) the A-weighted equivalent continuous sound pressure level (L_Aeq), (2) the amplitude of the maximum peak of the interaural cross-correlation function (IACC), (3) the delay time (τ₁) and amplitude (?₁) of the first maximum peak of the autocorrelation function. The IACC, τ₁ and ?₁ are related to the subjective diffuseness, pitch and pitch strength, respectively. Regarding the locations, the L_Aeq in the underground stations was 6.4 dB higher than that in the above-ground stations, and the pitch in the underground stations was higher and stronger. Regarding the platform styles, the L_Aeq on the side platforms was 3.3 dB higher than on the island platforms of the above-ground stations. For the underground stations, the L_Aeq on the island platforms was 3.3 dB higher than that on the side platforms when a train entered the station. The IACC on the island platforms of the above-ground stations was higher than that in the other stations.     

Enantioselective Synthesis of AG‐041R by using N‐Heteroarenesulfonyl Cinchona Alkaloid Amides as Organocatalysts

The organocatalytic enantioselective decarboxylative addition of malonic acid half thioesters to ketimines derived from isatins by using N‐heteroarenesulfonyl cinchona alkaloid amides afforded products with high enantioselectivity. The products could be converted into optically active AG‐041R. X‐ray crystallographic analysis revealed that the hydrogen bonding between the sulfonimide proton and the 8‐quinolyl nitrogen atom plays an important role in exerting the enantioselectivity of the reaction.     

Terminal Redox‐Site Effect on the Long‐Range Electron Conduction of Fe(tpy)2 Oligomer Wires on a Gold Electrode

This article completes our comprehensive understanding of the electron transport properties of our original π‐conjugated redox‐active molecular wires comprising Fe bridged by p‐phenylene linkers (tpy=2,2′:6′,2′′‐terpyridine). The Fe(tpy)₂ oligomer wires comprise three types of tpy ligands: the anchor tpy ligand ( A series) makes a junction between the wire and electrode, the bridging bis‐tpy ligand ( L series) connects the Fe(tpy)₂ units, and the terminal tpy ligand ( T series) possesses a redox site as a probe for the long‐range electron transport ability. Taking advantage of the precise tunability of the composition of the Fe(tpy)₂ oligomer wires, thus far we investigated how A and L impacted on the electron‐transport ability. The excellent long‐range electron transport ability with ultrasmall attenuation constants (β^d, 0.002 Å^?1 as the minimum) depends on L significantly [Chem. Asian J. 2009 , 4, 1361], whereas A is unrelated to the β^d value, but influences the zero‐distance electron‐transfer rate constant, k_et⁰ [J. Am. Chem. Soc. 2010 , 132, 4524]. Herein we study the influence of terminal ligand T ^x (x=1–3). β^d is independent of T , however, T³ , with a cyclometallated Ru complex as the redox site, gives rise to a k_et⁰ value greater than T¹ and T² with ferrocene. This series of simple but definitive conclusions indicates that we have reached the stage of being able to precisely design molecular wires to attain desirable single‐molecule electron conduction.