Heparin bioconjugate with a thermoresponsive cationic branched polymer: a novel aqueous antithrombogenic coating material

With a view to reducing the thrombogenic potential of artificial blood-contact devices and natural tissues, we developed a novel aqueous antithrombogenic coating material, comprising a heparin bioconjugate that incorporated a thermoresponsive cationic polymer as a surfactant. The polymer was prepared by the sequential steps of initiator-transfer agent-terminator (iniferter)-based living radical photopolymerization of N-[3-(dimethylamino)propyl]acrylamide, followed by the polymerization of N-isopropylacrylamide from tetra(N,N-diethyldithiocarbamylmethyl)benzene as a multifunctional iniferter. The polymer obtained possessed four branched chains, each consisting of a cationic PDMAPAAm block (Mn: ca. 3000 g.mol(-1)) forming an inner domain for heparin binding and a thermoresponsive PNIPAM block (Mn: ca. 6000 g.mol(-1)) forming an outer domain for surface fixation; bioconjugation of the polymer with heparin occurred immediately upon simple mixing in an aqueous medium. Because the lower critical solution temperature of the heparin bioconjugate was approximately 35 degrees C, it could be coated from an aqueous solution at room temperature. The excellent adsorptivity and high durability of the coating below 37 degrees C was demonstrated on several generally used polymers by wettability measurement and surface chemical compositional analysis, and on collagen sheets and rat skin tissue by heparin staining. Blood coagulation was significantly prevented on the heparin bioconjugate-coated surfaces. The thermoresponsive bioconjugate developed therefore appeared to satisfy the initial requirements for a biocompatible aqueous coating material.     

Anionic Polymerization of New Dual-Functionalized Styrene and α-Methylstyrene Derivatives Having Styrene or α-Methylstyrene Moieties

Anionic polymerizations of four new dual-functionalized styrene and α-methylstyrene derivatives, 3-(4-(4-isopropenylphenoxy)butyl)styrene ( 4 ), 3-(4-(2-isopropenylphenoxy)butyl)-α-methylstyrene ( 5 ), 4-(4-(4-isopropenylphenoxy)butyl)-α-methylstyrene ( 6 ), and 4-(4-(2-vinylphenoxy)butyl)styrene ( 7 ), were carried out in THF at -78 °C with sec-BuLi as an initiator. Both 4 and 5 underwent anionic polymerization in a living manner to quantitatively afford functionalized polystyrenes and poly(α-methylstyrene)s having α-methylstyrene moiety in each monomer unit and precisely controlled chain lengths. On the other hand, insoluble polymers were obtained by the anionic polymerization of 6 and 7 under the same conditions. The positional effect of substituent on anionic polymerization was discussed.     

Low-temperature preparation of SrxBi2+yTa2O9 ferroelectric thin film by pulsed laser deposition and its application to a metal–ferroelectric–nitride–oxide–semiconductor structure

Preferentially (105)-oriented Sr_xBi_2+yTa₂O₉ (SBT) thin films on SiN/SiO₂/p-Si(100) prepared by the pulsed laser deposition (PLD) method at a temperature as low as 400 °C, which is the lowest process temperature for growing SBT ferroelectric thin films on a silicon nitride film. Excess Bi promotes crystallization of the SBT film. A metal-ferroelectric-nitride-oxide-semiconductor (MFNOS) structure, which is very important in ferroelectric gate memory FET, has been fabricated by depositing the SBT film on silicon nitride-oxide-silicon. The MFNOS structures show capacitance-voltage (C-V) hysteresis corresponding to ferroelectric hysteresis. A memory window of the C-V hysteresis is improved, to be as high as 3.5 V in the SBT(400 nm)/SiN_x(7 nm)/SiO₂(18 nm)/Si compared with the window of 2.7 V in the SBT(400 nm)/SiO₂(27 nm)/Si (MFOS), where the thicknesses of their insulator layers are nearly the same. Little degradation is induced in the C-V characteristics of the SiN_x/SiO₂/p-Si structure when depositing the SBT film by PLD at low temperature. It is also found that the SiN_x layer acts as a diffusion barrier against component atoms in the SBT film during its deposition. Finally, the MFNOS structure prepared at the low temperature is very promising for a next-generation ferroelectric gate memory FET.     

Solid‐phase thermal polymerization of macrocyclic ethylene terephthalate dimer using various transesterification catalysts

Thermal ring‐opening polymerization of a uniform macrocyclic ethylene terephthalate dimer with and without catalyst was investigated for the first time. Although polymerization progressed without a catalyst, the reaction was extremely slow and all the products were colored. Various transesterification catalysts were tested for their activity toward this ring‐opening polymerization. Among the various catalysts, 1,3‐dichloro‐1,1,3,3‐tetrabutyldistannoxane exhibited the highest catalytic activity, and a colorless polymer with a weight‐average molecular weight of 36,100 was obtained in 100% yield by heating for 3 min at 200 °C. It is noteworthy that our method does not need a vacuum because no side products are formed during the process. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3360–3368, 2000     

Synthesis and characterization of ordered polyurethanes from nonsymmetric diisocyanate and ethylene glycol

An ordered polyurethane with a head‐to‐head (H‐H) or tail‐to‐tail (T‐T) content over 95% was prepared by polyaddition reaction of a nonsymmetric monomer, p‐isocyanatobenzyl isocyanate (1) with a symmetric monomer, ethylene glycol (2). The model reactions were studied in detail to demonstrate the feasibility of polymer formation. The polymerization was conducted in THF in the presence of triethylamine (TEA) at 0 °C by slow addition of a half amount of 2 to 1, followed by removing THF and then adding the rest of 2 in DMF at once at 30 °C in the presence of dibutyltin dilaurate (DBTL). The microstructure of the polymer obtained was investigated by ¹³C NMR spectroscopy, and it was found that the polymer had the expected structural regularity. The constitutional regularity of polymers influenced their thermal properties. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2106–2114, 2000     

Synthesis of well-defined polystyrene with multi-functional end groups utilizing cyclotriphosphazene

Telechelic polystyrenes with five benzyl chloride moieties at the polymer end (PSt-E) were prepared by coupling reaction of polystyryllithium with hexakis(4-chloromethyl-phenoxy)cyclotriphosphazene ( 4 ). The coupling reaction occurs almost quantitatively and unfavorable side reactions were not operative. When a mole ratio [ 4 ]/[sec-BuLi] = 9.3 was used, polystyrenes with cyclophosphazene carrying five benzyl chloride moieties at the polymer end (PSt-E) were obtained in more than 90% yield, which have narrow and predictable molecular weights (M _w/M _n = 1.05). A star shaped polystyrene with phosphazene core could also be prepared by using excess polystyryl anions.     

Fluorophotometric Determination of Hydrogen Peroxide with Fluorescin in the Presence of Cobalt (II) and Reaction Against Other Reactive Oxygen Species

A fluorophotometric method for the determination of hydrogen peroxide (H₂O₂) using fluorescin was developed. This method was based on the oxidative reaction of fluorescin, a colorless, non-fluorescent lactoid fluorescein, by H₂O₂ to give highly fluorescein fluorescence emission. In the determination of H₂O₂, the calibration curve exhibited linearity over the H₂O₂ concentration range of 1.5–310 ng mL⁻¹ at an emission wavelength of 525 nm with an excitation of 500 nm and with relative standard deviations (n = 6) of 2.51%, 2.48%, and 1.31% for 3.1 ng mL⁻¹, 30.8 ng mL⁻¹, and for 308 ng mL⁻¹ of H₂O₂, respectively. The detection limit for H₂O₂ was 1.9 ng mL⁻¹ six blank determinations was performed (ρ = 6). This proposed method was applied to detection of other reactive oxygen species and nitrogen species (ROS/RNS) such as singlet oxygen (¹O₂), hydroxyl radical (^•OH), peroxynitrite (ONOO⁻) etc., and it was possible to detect them with a high sensitivity. In addition, this proposed method was applied to the recovery tests of H₂O₂ in calf serum, human saliva, rain water, and wheat noodles; the results were satisfactory.     

Guest-encapsulation behavior in a self-assembled heterodimeric capsule

Tetra(4-pyridyl)-cavitand 1 and tetrakis(4-hydroxyphenyl)-cavitand 2 self-assemble into a heterodimeric capsule 1·2 via four PhOH?pyridyl hydrogen bonds in CDCl₃, wherein one molecule of 1,4-disubstituted-benzene as a guest is encapsulated to form a ternary complex, guest@(1·2). The X-ray crystallographic analysis of (methyl p-ethoxybenzoate)@(1·2) confirmed that the methyl ester and ethoxy groups of the encapsulated guest are oriented to the cavity ends of the 1 and 2 units, respectively. The scope and limitation of guest encapsulation in 1·2, including guest-binding selectivity and orientational isomeric selectivity, are described from the viewpoint of size complementarity and CH-π, CH-halogen, and halogen-π interactions between guest and the cavity of 1·2.     

Synthesis and properties of PI polyamide-SAHA conjugate

We have designed and synthesized new types of pyrrole (P)-imidazole (I) polyamide conjugates 1 and 2 possessing a suberoylanilide hydroxamic acid (SAHA) moiety that is a strong inhibitor of histone deacetylase (HDAC). SAHA conjugate 2 was designed to target the promoter region of the p16 tumor suppressor gene. The DNA binding affinity of SAHA conjugate 2 to its target sequence was examined using surface plasmon resonance. HDAC inhibition activity of conjugates 1 and 2 was evaluated using a colorimetric assay. The results demonstrated that even though it possesses the relatively large SAHA moiety, conjugate 2 has high DNA sequence-specific binding properties and moderate HDAC inhibitory activity in vitro. SAHA conjugate 2 was found to cause morphological changes in HeLa cells and to induce selective Histone H3 lysine 9 acetylation.