Design and synthesis of highly sensitive and selective fluorescein-derived magnesium fluorescent probes and application to intracellular 3D Mg2+ imaging

The role of intracellular magnesium ions is of high interest in the fields of pharmacology and cellular biology. To accomplish the dynamic and three-dimensional imaging of intracellular Mg2+, there is a strong desire for the development of optimized Mg2+ fluorescent probes. In this paper we describe the design, synthesis, and cellular application of the three novel Mg2+ fluorescent probes KMG-101, -103, and -104. The compounds of this series feature a charged beta-diketone as a binding site specific for Mg2+ and a fluorescein residue as the fluorophore that can be excited with an Ar+ laser such as is widely used in confocal scanning microscopy. This molecular design leads to an intensive off-on-type fluorescent response toward Mg2+ ions. The two fluorescent probes KMG-103 and -104 showed suitable dissociation constants (Kd,Mg2+ = 2 mM) and nearly a 10-fold fluorescence enhancement over the intracellular magnesium ion concentration range (0.1-6 mM), allowing high-contrast, sensitive, and selective Mg2+ measurements. For intracellular applications, the membrane-permeable probe KMG-104AM was synthesized and successfully incorporated into PC12 cells. Upon application of the mitochondria uncoupler FCCP to the probe-incorporated cells, the resulting increase in the free magnesium ion concentration could be followed over time. By using a confocal microscope, the intracellular 3D magnesium ion concentration distributions were satisfactorily observed.     

Evolution of water vapor from indium-tin-oxide transparent conducting films fabricated by dip coating process

Tin-doped indium oxide In₂O₃ (indium-tin-oxide) transparent conducting films were fabricated on silicon substrates by a dip coating process. The thermal analysis of the ITO films was executed by temperature-programmed desorption (TPD) or thermal desorption spectroscopy (TDS) in high vacuum. Gas evolution from the ITO film mainly consisted of water vapor. The total amount of evolved water vapor increased on increasing the film thickness from approx. 25 to 250 nm and decreased by increasing the preparation temperature from 365 to 600°C and by annealing at the same temperature for extra 10 h. The evolution occurred via two steps; the peak temperatures for 250 nm thick films were approx. 100-120 and 205-215°C. The 25 nm thick films evolved water vapor at much higher temperatures; a shoulder at approx. 150-165°C and a peak at approx. 242°C were observed. The evolution temperatures increased by increasing the preparation and the annealing temperatures except in case of the second peak of the 25 nm thick films. The evolution of water vapor at high temperature was tentatively attributed to thermal decomposition of indium hydroxide, In(OH)₃, formed on the surface of the nm-sized ITO particles. This revised version was published online in August 2006 with corrections to the Cover Date.     

Surface modification with well-defined biocompatible triblock copolymers Improvement of biointerfacial phenomena on a poly(dimethylsiloxane) surface

To improve interfacial phenomena of poly(dimethylsiloxane) (PDMS) as biomaterials, well-defined triblock copolymers were prepared as coating materials by reversible addition-fragmentation chain transfer (RAFT) controlled polymerization. Hydroxy-terminated poly(vinylmethylsiloxane-co-dimethylsiloxane) (HO–PV_lD_mMS–OH) was synthesized by ring-opening polymerization. The copolymerization ratio of vinylmethylsiloxane to dimethylsiloxane was 1/9. The molecular weight of HO–PV_lD_mMS–OH ranged from (1.43 to 4.44) × 10⁴, and their molecular weight distribution (M_w/M_n) as determined by size-exclusion chromatography equipped with multiangle laser light scattering (SEC-MALS) was 1.16. 4-Cyanopentanoic acid dithiobenzoate was reacted with HO–PV_lD_mMS–OH to obtain macromolecular chain transfer agents (macro-CTA). 2-Methacryloyloxyethyl phosphorylcholine (MPC) was polymerized with macro-CTAs. The gel-permeation chromatography (GPC) chart of synthesized polymers was a single peak and M_w/M_n was relatively narrow (1.3–1.6). Then the poly(MPC) (PMPC)–PV_lD_mMS–PMPC triblock copolymers were synthesized. The molecular weight of PMPC in a triblock copolymer was easily controllable by changing the polymerization time or the composition of the macro-CTA to a monomer in the feed. The synthesized block copolymers were slightly soluble in water and extremely soluble in ethanol and 2-propanol.

Surface modification was performed via hydrosilylation. The block copolymer was coated on the PDMS film whose surface was pretreated with poly(hydromethylsiloxane). The surface wettability and lubrication of the PDMS film were effectively improved by immobilization with the block copolymers. In addition, the number of adherent platelets from human platelet-rich plasma (PRP) was dramatically reduced by surface modification. Particularly, the triblock copolymer having a high composition ratio of MPC units to silicone units was effective in improving the surface properties of PDMS.

By selective decomposition of the Si–H bond at the surface of the PDMS substrate by irradiation with UV light, the coating region of the triblock copolymer was easily controlled, resulting in the fabrication of micropatterns. On the surface, albumin adsorption was well manipulated.     

Oxygen vacancy promoting catalytic dehydration of formic acid on TiO2(110) by in situ scanning tunneling microscopic observation

The catalytic dehydration reaction processes of formic acid on a TiO2(110) surface at 350 K have been studied to visualize reaction intermediates and their dynamic behaviors by scanning tunneling microscopy. Three types of configurations of adsorbed formates on the surface were identified by their shapes and positions in STM images. Successive STM observations revealed transformations among the three configurations, i.e., bridge formate on a 5-fold coordinated Ti4+ row, bridge formate on an oxygen vacancy site with an oxygen atom of formate and on a 5-fold coordinated Ti4+ ion and with the other formate oxygen atom, and a monodentate formate on an oxygen vacancy site with an oxygen atom of formate. The decomposition of the monodentate formate to carbon monoxide and hydroxyl was also imaged, which is a rate-determining step in the catalytic dehydration of formic acid. Combined with first-principle DFT calculations, the overall reaction processes of the catalytic dehydration of formic acid on the surface have been elucidated. Oxygen vacancies on the surface that can be produced by dehydration of two hydroxyls in situ under the catalytic reaction conditions are essential for the reaction.     

Key Factors for Simultaneous Improvements of Performance and Durability of Core‐Shell Pt3Ni/Carbon Electrocatalysts Toward Superior Polymer Electrolyte Fuel Cell

It remains a big challenge to remarkably improve both oxygen reduction reaction (ORR) activity and long‐term durability of Pt?M bimetal electrocatalysts simultaneously in the harsh cathode environment toward widespread commercialization of polymer electrolyte fuel cells (PEFC). In this account we found double‐promotional effects of carbon micro coil (CMC) support on ORR performance and durability of octahedral Pt₃Ni nanoparticles (Oh Pt₃Ni/CMC). The Oh Pt₃Ni/CMC displayed remarkable improvements of mass activity (MA; 13.6 and 34.1 times) and surface specific activity (SA; 31.3 and 37.0 times) compared to those of benchmark Pt/C (TEC10E20E) and Pt/C (TEC10E50E‐HT), respectively. Notably, the Oh Pt₃Ni/CMC revealed a negligible MA loss after 50,000 triangular‐wave 1.0–1.5 V_RHE (startup/shutdown) load cycles, contrasted to MA losses of 40 % (TEC10E20E) and 21.5 % (TEC10E50E‐HT) by only 10,000 load cycles. It was also found that the SA increased exponentially with the decrease in the CO stripping peak potential in a series of Pt?M/carbon (M: Ni and Co), which predicts a maximum SA at the curve asymptote. Key factors for simultaneous improvements of performance and durability of core‐shell Pt₃Ni/carbon electrocatalysts toward superior PEFC is also discussed.     

An accurate numerical multicenter integration for molecular orbital theory

A powerful and accurate numerical three‐dimensional integration scheme was developed especially for molecular orbital calculations. A multicenter integral is decomposed into the sum of single‐center integrals using nuclear weight functions and calculated using Gaussian quadrature rules. The decomposed single‐center integrands show strong anisotropy. With a careful selection of the Gaussian quadrature rule according to the anisotropy, it is possible to obtain an accuracy of 13 digits with a small number of integration points for the overlap integrals, normalization integrals, and molecular integrals for the hydrogen molecule. ©1999 John Wiley & Sons, Inc. Int J Quant Chem 72: 509–523, 1999     

W(CO)5(L)-catalyzed formal cope rearrangement of allenyl silyl enol ethers

[reaction: see text] On treatment of 5-siloxyhexa-1,2,5-trienes with a catalytic amount of W(CO)(6) under photoirradiation, formal Cope rearrangement proceeded to give 2-siloxyhex-1-en-5-ynes in good yield. The electrophilic activation of the allenyl moiety by W(CO)(5) triggers the intramolecular attack of the silyl enol ether in a 6-endo manner to produce a cyclohexenyl tungsten species. Carbon-carbon bond cleavage occurs by electron donation from the anionic W(CO)(5) into the silyloxonium moiety to afford the products with regeneration of the W(CO)(5)(L).     

The role of carbon dioxide in chemoselective hydrogenation of halonitroaromatics over supported noble metal catalysts in supercritical carbon dioxide

Chemoselective hydrogenation of halogenated nitrobenzenes over Pt/C catalysts proceeds effectively in supercritical carbon dioxide (scCO2) to produce halogenated anilines with excellent selectivity; the rate of the hydrogenation of nitro groups is markedly enhanced in scCO2 compared to the neat reaction, and the dehalogenation reaction is significantly suppressed.     

Bound site of Mo atoms and its local structure in a Mo/HY catalyst characterized by extended X-ray absorption fine structure and density functional calculation

The bound site of Mo atoms and its local structure in a Mo/HY catalyst have been determined by detailed analysis of extended X-ray absorption fine structure (EXAFS). Molybdenum was introduced in the supercage of HY zeolite by cycles of saturated adsorption of Mo(CO)6 at room temperature and subsequent thermal decomposition at 573 K. Two Mo atoms per supercage were immobilized in each CVD-thermal treatment cycle. The Mo loading increased linearly with the cycles up to three cycles at saturation, where six Mo atoms were supported. Temperature-programmed decomposition of the adsorbed Mo(CO)6 was also characterized by GC, QMS, and FT-IR, respectively. The EXAFS analysis including multiple scattering based on theoretical calculations revealed that Mo bound with two oxygen atoms connects to Al, where one of the two oxygen atoms had been associated with a proton. The bound site is called the S(III)' site. The zeolite framework was significantly distorted by the introduction of low-valent Mo, resulting in isolation of the [MoO2Al] unit from the surrounding zeolite framework due to a quasi-disruption of Si-O bonds adjacent to the unit. In the mild oxidation of the low-valent Mo/HY sample two Mo=O bonds were newly formed and the position of Mo was displaced by 0.06 nm so that the distortion of zeolite framework around the Al atom was relieved. The structures were also supported by DFT calculations. This study is the first example that the position of metal cation in zeolite was determined unambiguously by the EXAFS analysis.