Preconcentration and determination of cadmium by GFAAS after solid-phase extraction with synthetic zeolite.

The solid-phase extraction (SPE) method for the preconcentration of trace amounts of cadmium using synthetic zeolite A-4 and its determination by graphite furnace atomic absorption spectrometry (GFAAS) was investigated. The preconcentration conditions, such as the optimum pH range of the sample solution for the adsorption of cadmium and the kind of acid solution for dissolving the cadmium-adsorbed synthetic zeolite A-4, as well as the measurement conditions for the determination of cadmium by GFAAS, e.g., the ashing and atomizing temperature, were investigated. Quantitative recovery of cadmium onto zeolite A-4 from the sample solution over the pH range 2.0 - 9.0 was achieved by the batch method. After the solid-phase (cadmium-adsorbed zeolite A-4) was separated from the sample solution by a membrane filter, it was dissolved in 2.0 cm(3) of 2.0 mol dm(-3) nitric acid. An aliquot of the resulting solution was injected into the graphite furnace. In GFAAS measurements an alternate gas (Ar, 90%; O(2), 10%) was used as a sheath gas, and the ashing temperature and atomizing temperature were 400 degrees C and 1600 degrees C, respectively. The detection limit (3 sigma) for cadmium was 0.002 microg dm(-3). The relative standard deviation at 0.010 microg dm(-3) was 3.5 - 4.5% (n = 5). The proposed method has been successfully applied to the analysis of trace cadmium in environmental water samples.     

System size and energy dependence of jet-induced hadron pair correlation shapes in Cu+Cu and Au+Au collisions at square root sNN=200 and 62.4 GeV

We present azimuthal angle correlations of intermediate transverse momentum (1-4 GeV/c) hadrons from dijets in Cu+Cu and Au+Au collisions at square root sNN=62.4 and 200 GeV. The away-side dijet induced azimuthal correlation is broadened, non-Gaussian, and peaked away from Delta phi=pi in central and semicentral collisions in all the systems. The broadening and peak location are found to depend upon the number of participants in the collision, but not on the collision energy or beam nuclei. These results are consistent with sound or shock wave models, but pose challenges to Cherenkov gluon radiation models.     

J/psi production versus centrality, transverse momentum, and rapidity in Au+Au collisions at square root sNN=200 GeV

The PHENIX experiment at the BNL Relativistic Heavy Ion Collider (RHIC) has measured J/psi production for rapidities -2.2相似文献   

Hydrogen Production from a Methanol–Water Solution Catalyzed by an Anionic Iridium Complex Bearing a Functional Bipyridonate Ligand under Weakly Basic Conditions

An efficient catalytic system for the production of hydrogen from a methanol–water solution has been developed using a new anionic iridium complex bearing a functional bipyridonate ligand as a catalyst. This system can be operated under mild conditions [weakly basic solution (0.046 mol L^?1 NaOH) below 100 °C] without the use of an additional organic solvent. Long‐term continuous hydrogen production from a methanol–water solution catalyzed by the anionic iridium complex was also achieved.     

PhI(OAc)2-mediated iminobromination for synthesis of bromomethyl cyclic imines starting from alkenyl carbonitriles and Grignard reagents

PhI(OAc)₂-mediated iminobromination was developed starting from alkenyl carbonitriles and Grignard reagents. The present transformation is carried out by a sequence of nucleophilic addition of Grignard reagents to alkenyl carbonitriles to form N-H imines and their iminohalogenation by subsequent treatment with PhI(OAc)₂.     

A simultaneous space sampling method for DNA fraction collection using a comb structure in microfluidic devices

Fraction collection of selected components from a complex mixture plays a critical role in biomedical research, environmental analysis, and biotechnology. Here, we introduce a novel electrophoretic chip device based on a signal processing theorem that allows simultaneous space sampling for fractionation of ssDNA target fragments. Ten parallel extraction channels, which covered 1.5-mm-long sampling ranges, were used to facilitate the capturing of fast-moving fragments. Furthermore, the space sampling extraction made it possible to acquire pure collection, even from partly overlapping fragments that had been insufficiently separated after a short electrophoretic run. Fragments of 180, 181, and 182 bases were simultaneously collected, and then the recovered DNA was PCR amplified and assessed by CE analysis. The 181-base target was shown to be isolated in a 70-mm-long separation length within 10 min, in contrast to the >50 min required for the 300-mm-long separation channel in our previous study. This method provides effective combination of time and space, which is a breakthrough in the traditional concept of fraction collection on a chip.     

Cage-shaped borate esters with tris(2-oxyphenyl)methane or -silane system frameworks bearing multiple tuning factors: geometric and substituent effects on their Lewis acid properties

Boron complexes that contain new tridentate ligands, tris(o‐oxyaryl)methanes and ‐silanes, were prepared. These complexes had a cage‐shaped structure around a boron center and showed higher Lewis acidity and catalytic activity than open‐shaped boron compounds. The cage‐shaped ligands determined the properties of the borates by altering the geometry and were consistently bound to the metal center by chelation. The synthesized compounds were L?B(OC₆H₄)₃CH, L?B(OC₆H₄)₃SiMe, and its derivatives (L=THF or pyridine as an external ligand). Theoretical calculations suggested that the cage‐shaped borates had a large dihedral angle (C_ipso‐O‐B‐O) compared with open‐shaped borates. The geometric effect due to the dihedral angle means that compared with open‐shaped, the cage‐shaped borates have a greater Lewis acidity. The introduction of electron‐withdrawing groups on the aryl moieties in the cage‐shaped framework increased the Lewis acidity. Substitution of a bridgehead Si for a bridgehead C decreased the Lewis acidity of the boron complexes because the large silicon atom reduces the dihedral angle of C_ipso‐O‐B‐O. The ligand‐exchange rates of the para‐fluoro‐substituted compound B(OC₆H₃F)₃CH and the ortho‐phenyl‐substituted compound B(OC₆H₃Ph)₃CH were less than that of the unsubstituted borate B(OC₆H₄)₃CH. The ligand‐exchange rate of B(OC₆H₄)₃SiMe was much faster than that of B(OC₆H₄)₃CH. A hetero Diels–Alder reaction and Mukaiyama‐type aldol reactions were more effectively catalyzed by cage‐shaped borates than by the open‐shaped borate B(OPh)₃ or by the strong Lewis acid BF₃?OEt₂. The cage‐shaped borates with the bulky substituents at the ortho‐positions selectively catalyzed the reaction with less sterically hindered substrates, while the unsubstituted borate showed no selectivity.     

Mass balance method for purity assay of phthalic acid esters: development of primary reference materials as traceability sources in the Japan Calibration Service System

Purity assay of high-purity materials (HPMs) of phthalic acid esters (PAEs) was carried out by means of a mass balance method. In this method, chromatographic methods such as gas chromatography-flame ionization detector (GC-FID) and/or high-performance liquid chromatography (HPLC) in combination with other methods such as Karl-Fischer (KF) titration and vacuum evaporation (VE) were applied. The sum of the impurities estimated by these methods allowed the estimation of the purity of the main component by difference. Seven PAEs with varying side chain structures and levels of impurities were analysed on a systematic way in which impurities were classified into several groups in terms of their abundance, availability of qualitative information and availability of authentic compounds, etc. The absolute quantity of each impurity was determined by GC-FID and/or HPLC based on the calibration made by the authentic compounds of impurities whenever available. The purities in mass fraction of these PAEs were certified at the National Metrology Institute of Japan (NMIJ), and the PAEs were registered as primary reference materials playing an essential role in linking the metrological traceability of the Japan Calibration Service System (JCSS) to the International System of Units (SI).     

Redox-controlled, reversible rearrangement of a tris(2-pyridylthio)methyl ligand on nickel to an isomer with an “N,S-confused” 2-pyridylthiolate arm

Interchange between the nickel +2 and +3 oxidation states precisely controls the reversible rearrangement of the tris(2-pyridylthio)methanide (tptm) ligand in the organometallic nickel(II) complex [{Ni(μ-Br)-(tptm)}(2)] (2). Oxidation of 2 first gives the corresponding Ni(III) complex [{Ni(μ-Br)(tptm)}(2)][PF(6)](2) (4). However, in solution the tptm ligand in 4 slowly undergoes a rearrangement, in which the N and S atoms of one of the pyridylthiolate arms exchange Ni and C bonding partners, thereby resulting in an "N,S-confused" isomer of tptm in the product, [NiBr(bpttpm)]PF(6) (5; bpttpm= bis(2-pyridylthio)(2-thiopyridinium)-methyl). Reduction of 5 reverses this ligand rearrangement and 2 is reformed quantitatively. The individual steps involved in these unusual ligand rearrangements were investigated by a number of methods, including voltammetric analysis, and a mechanism for this process is proposed. X-ray crystal structure determinations of the key compounds 2, 4 and 5 have been obtained.     

Copper-catalyzed benzylic C-H oxygenation under an oxygen atmosphere via N-H imines as an intramolecular directing group

Copper-catalyzed benzylic C-H oxygenation under an oxygen atmosphere was developed starting from carbonitriles and Grignard reagents via N-H imine intermediates. The present process is characterized by the following two-step sequence in a one-pot manner: (1) addition of Grignard reagents to carbonitriles to form N-H imines and (2) benzylic C-H oxygenation (C═O bond formation) triggered by 1,5-hydrogen atom transfer with transient iminyl copper species.