Excitation-energy migration in self-assembled cyclic zinc(II)-porphyrin arrays: a close mimicry of a natural light-harvesting system

The excitation-energy-hopping (EEH) times within two-dimensional cyclic zinc(II)-porphyrin arrays 5 and 6, which were prepared by intermolecular coordination and ring-closing metathesis reaction of olefins, were deduced by modeling the EEH process based on the anisotropy depolarization as well as the exciton-exciton annihilation dynamics. Assuming the number of energy-hopping sites N = 5 and 6, the two different experimental observables, that is, anisotropy depolarization and exciton-excition annihilation times, consistently give the EEH times of 8.0 +/- 0.5 and 5.3 +/- 0.6 ps through the 1,3-phenylene linkages of 5 and 6, respectively. Accordingly, the self-assembled cyclic porphyrin arrays have proven to be well-defined two-dimensional models for natural light-harvesting complexes.     

Brush‐First ROMP of poly(ethylene oxide) macromonomers of varied length: impact of polymer architecture on thermal behavior and Li+ conductivity

The properties of polymeric materials are dictated not only by their composition but also by their molecular architecture. Here, by employing brush‐first ring‐opening metathesis polymerization (ROMP), norbornene‐terminated poly(ethylene oxide) (PEO) macromonomers ( MM‐n , linear architecture), bottlebrush polymers ( Brush‐n , comb architecture), and brush‐arm star polymers ( BASP‐n , star architecture), where n indicates the average degree of polymerization (DP) of PEO, are synthesized. The impact of architecture on the thermal properties and Li⁺ conductivities for this series of PEO architectures is investigated. Notably, in polymers bearing PEO with the highest degree of polymerization, irrespective of differences in architecture and molecular weight (~100‐fold differences), electrolytes with lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) as an Li⁺ source exhibit normalized ionic conductivities (σ_n) within only 4.9 times difference (σ_n = 29.8 × 10^?5 S cm^?1 for MM‐45 and σ_n = 6.07 × 10^?5 S cm^?1 for BASP‐45 ) at a concentration of Li⁺ r = [Li⁺]/[EO] = 1/12 at 50 °C. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 448–455     

Statistics of reaction progress variable and mixture fraction gradients of a pulverised coal jet flame using Direct Numerical Simulation data

The statistical behaviour of the variances, covariance and gradients of the reaction progress variable (c), and the mixture fraction (ξ) have been analysed in a pulverised coal jet flame using a three-dimensional carrier phase direct numerical simulation (DNS) dataset. It has been observed that the Favre-probability density functions (PDFs) of c and ξ can be parametrised by the standard β function. Furthermore, the log-normal distribution has been found to accurately represent |?c| and |?ξ|. It is also found that ?c and ?ξ remain aligned throughout the flame brush. Finally the joint PDF of |?c| and |?ξ| has been compared with the product of the PDF of |?c| and PDF of |?ξ| extracted from carrier phase DNS, and it has been found that |?c| and |?ξ| are not statistically independent in the case investigated.The bivariate log-normal distributions with and without correlation have also been considered, and the former is found to be in better agreement with the carrier phase DNS data.     

Synthesis and photophysical properties of 2,2′-binaphthalene-based receptor bearing trimethylsilyl groups to improve the solubility

Two trimethylsilyl groups were introduced at 5- and 5′-positions of 2,2′-binaphthalene to improve the solubility of 2,2′-binaphthalene-based receptors. The X-ray crystallographic analysis revealed the twisted structure of 2 in the solid state. The solubility of 2 was moderately improved by 3.1-fold comparing with mother skeleton 1. As a practical example of 2, receptor 8 bearing two aza-15-crown-5 moieties was prepared and the selective binding of 8 with Ba²⁺ can be observed by the formation of sandwich-like complex, which shows no prevention of binding ability of the receptor by introduction of the bulky substituents.     

Mn(III)-based reaction of alkenes with quinolinones. Formation of peroxyquinolinones and quinoline-related derivatives

The reactions of 1,1-disubstituted alkenes with 4-hydroxyquinolin-2(1H)-ones under both Mn(III)-catalyzed aerobic oxidation conditions at room temperature and Mn(III)-mediated oxidation conditions at reflux temperature are described. The Mn(III)-catalyzed aerobic oxidation afforded bis(hydroperoxyethyl)quinolinones and azatrioxa[4.4.3]propellanes, while the oxidation with Mn(OAc)₃·2H₂O produced furo[3,2-c]quinolin-4-one analogues. The existence of a substituent at the 3-position of the 4-hydroxyquinolin-2(1H)-ones prevented a double reaction with the alkenes, and (endoperoxy)quinolinones and/or (hydroperoxyethyl)quinolinones were obtained under the Mn(III)-catalyzed aerobic conditions, while furo[3,2-c]quinolinone hemiacetals and vinylquinolinones were selectively produced under the Mn(III)-mediated oxidation conditions depending on the reaction temperature and times. Cyclic assembly of quinolinone-related 1,3-dicarbonyl compounds such as dihydropyridinones, pyranones, and dimedone derivatives was also examined under elevated temperature conditions.     

Genetic optical design for a compressive sensing task

We present a sophisticated optical design method for reducing the number of photodetectors for a specific sensing task. The chosen design parameter is the point spread function, and the selected task is object recognition. The point spread function is optimized iteratively with a genetic algorithm for object recognition based on a neural network. In the experimental demonstration, binary classification of face and non-face datasets was performed with a single measurement using two photodetectors. A spatial light modulator operating in the amplitude modulation mode was provided in the imaging optics and was used to modulate the point spread function. In each generation of the genetic algorithm, the classification accuracy with a pattern displayed on the spatial light modulator was fed-back to the next generation to find better patterns. The proposed method increased the accuracy by about 30 % compared with a conventional imaging system in which the point spread function was the delta function. This approach is practically useful for compressing the cost, size, and observation time of optical sensors in specific applications, and robust for imperfections in optical elements.     

A new application of statistical moment theory to evaluate the swelling behavior of thermo-responsive gels

The loosely cross-linked poly(acryloyl-L -proline methyl ester) gel, which is known as one of the typical thermo-responsive gels, shows a volume transition around approximately 14°C in pure water. This volume transition is shifted to higher temperature by treatment in aqueous sodium dodecyl sulfate (SDS). The analysis of the swelling-temperature curve (frequency distribution) was performed according to a moment analysis, in which the area under the swelling-temperature curve (AUC), mean swelling transition temperature (MSTT) and variance of swelling transition temperature (VSTT) were calculated. It is shown that the apparent volume transition temperature can be estimated from MSTT and that VSTT can be used to characterize the shape of the corresponding curves.     

Recent Progress in Homogeneous Catalytic Dehydrogenation of Formic Acid

Recently, there has been a strong demand for technologies that use hydrogen as an energy carrier, instead of fossil fuels. Hence, new and effective hydrogen storage technologies are attracting increasing attention. Formic acid (FA) is considered an effective liquid chemical for hydrogen storage because it is easier to handle than solid or gaseous materials. This review presents recent advances in research into the development of homogeneous catalysts, primarily focusing on hydrogen generation by FA dehydrogenation. Notably, this review will aid in the development of useful catalysts, thereby accelerating the transition to a hydrogen-based society.     

Morphological studies of a hydrogen-bonded LC polymer obtained by photopolymerization in LC solvents

Anisotropic morphologies and the phase behaviour of a hydrogen-bonded LC polymer obtained by photopolymerization in two kinds of LC solvent are discussed. The hydrogen-bonded LC monomer, 4-(6-acryloyloxyhexyloxy) benzoic acid (A6OBA), was photopolymerized in 4-cyano-4′-hexyloxybiphenyl (6OCB) and in 4-cyano-4′-undecyloxybiphenyl (11OCB), which show a nematic phase and a smectic A phase, respectively. After photo-polymerization, the LC media were removed by extraction and the pure polymer was observed by scanning electron microscopy. SEM images showed that the polymer possessed fibrous morphology with a fibre diameter of a few micrometers, based on polymerization-induced phase separation. The overall geometries reflected typical LC characteristics such as schlieren and focal-conic fan textures. It was found that the hydrogen bond between benzoic acid groups in the monomer was rigid enough to fix the anisotropic phase-separated structure forming during the early stage of phase separation; however, it could not permanently maintain the fibre structure due to dissociation at elevated temperature. X-ray measurements revealed that a well developed layer structure of the hydrogen-bonded mesogen existed in the polymer obtained from the smectic phase of 11OCB, whereas a polymer layer structure could develop only partially from the nematic phase of 6OCB.