A thin and compact compound-eye imaging system incorporated with an image restoration considering color shift, brightness variation, and defocus

A compact system of the thin observation module by bound optics (TOMBO) imager based on compound-eye imaging has been constructed to demonstrate its advantages over single-eye imaging systems such as thinner hardware. To reconstruct a high-resolution image from low resolution images captured by the compound-eye optics, we propose an image restoration scheme based on the iterative back-projection algorithm with depth map estimated from the disparities on the captured image. The scheme includes suppression of unit-by-unit color shift caused by the offset microlenses and the color filters on the commercial image sensors and deblurring of defocus by geometrical optics using the depth map. In the experiment, three-dimensional objects were captured by the TOMBO imager and reconstructed with the scheme. After the processing, the power spectrum of the captured image was improved by up to 19 dB, and the power spectrum of the effect of the color shift was reduced by 7 dB.     

Measurements of N2- and O2-broadening and shifting parameters of methane spectral lines in the 5550–6236 cm−1 region

The absorption spectra of mixtures of methane (CH₄) with N₂ and O₂ at different partial pressures of both CH₄ and buffer gases for three temperatures 240, 267, and 296 K have been recorded using the Bruker IFS 125 HR FTIR spectrometer in the 5550–6236 cm^?1 region. The multispectrum fitting procedure has been applied to these spectra to recover the spectral line parameters. The main goal of this procedure was the determination of the N₂- and O₂-broadening and shifting coefficients and the exponents of their temperature dependences. These parameters have been derived for 452 assigned lines with good values of the signal to noise ratio. The rotational dependence of the mean values of these parameters is discussed. The temperature dependence exponents were observed for both N₂ and O₂ buffer gases.     

调制n型掺杂ZnSe/BeTe Ⅱ型量子阱结构的发光特性

报道了调制n型掺杂ZnSe/BeTe/ZnSe Ⅱ型量子阱(type-II QW)在极低温至室温(14—296K)条件下的各种光学性质. 反射光谱显示了对于非掺杂样品,激子(X)的跃迁起着支配作用,而只有在掺杂样品的光谱里展示了一个典型的负的带电激子(X^-)的跃迁特征. PL光谱及其直线偏振度P_l都显著地依赖于n型掺杂量和平行于QW生长方向的外加电场. 这个特征被认为是由n型掺杂导致了内秉电场(built 关键词： 光致发光 二维电子气 带电激子 Ⅱ型量子阱     

Linear analysis of cyclotron-cherenkov and cherenkov instabilities in dielectric-loaded coaxial waveguides

We present, based on the cold fluid theory, linear analysis of the Cherenkov and cyclotron-Cherenkov instabilities which are driven when a linear electron beam is injected into a dielectric-loaded waveguide immersed in an axial magnetic field. In the analysis we consider azimuthally symmetric TM_0n modes. We derive dispersion relations for three types of waveguide, and compare computationally obtained linear growth rates of both instabilities. For the type A, which consists of a metallic cylinder with dielectric liner on its inner surface, the growth rate of the Cherenkov instability is larger than that of the cyclotron-Cherenkov instability. For the type B, which consists of a dielectric core and an outer metallic cylinder, both growth rates are comparable. And for the type C, which consists of a metallic core with dielectric liner on its surface and an outer metallic cylinder, the growth rate of the latter instability is higher than that of the former instability. Finally, for the type C, obtained are dependences of the oscillation frequency and the growth rates of both instabilities on the following parameters: the beam energy, the beam current, the axial magnetic field, the dielectric constant, and the thickness of the dielectric.     

Numerical Stability Analysis of FDLBM

We analyze the numerical stability of Finite Difference Lattice Boltzmann Method (FDLBM) by means of von Neumann stability analysis. The stability boundary of the FDLBM depends on the BGK relaxation time, the CFL number, the mean flow velocity, and the wavenumber. As the BGK relaxation time is increased at constant CFL number, the stability of the central difference LB scheme may not be ensured. The limits of maximum stable velocity are obtained around 0.39, 0.43, and 0.43 for the central difference, for the explicit upwind difference, and for the semi-implicit upwind difference schemes, respectively. We derive artificial viscosities for every difference scheme and investigate their influence on numerical stability. The requirements for artificial viscosity is consistent with the conditions derived from von Neumann stability analysis. This analysis elucidates that the upwind difference schemes are suitable for simulation of high Reynolds number flows.     

Stereochemistry of protected ornithine side chains of gramicidin S derivatives: X-ray crystal structure of the bis-Boc-tetra-N-methyl derivative of gramicidin S

An X-ray crystallographic analysis of the bis-Ndelta-Boc-tetra-Nalpha-methyl derivative of gramicidin S, cyclo(-Val-MeOrn(Boc)-Leu-d-MePhe-Pro-)2, was undertaken successfully (R-factor = 0.088). As expected, the main chain adopts an antiparallel pleated beta-sheet conformation, but the pleated sheet is slightly twisted, and the sense of twisting is opposite to that found in the reported crystal structures of the gramicidin S-urea complex and the bis-Ndelta-(trichloroacetyl) and bis-Ndelta-(m-bromobenzoyl) derivatives of gramicidin S. In agreement with the observed resistance toward N-methylation, the urethane NH groups of the protected Orn side chains are hydrogen bonded to the carbonyl groups of the d-Phe residues. However, the side-chain-main-chain hydrogen bonding is in the i --> i - 3 mode, although hydrogen bonding in the i --> i + 2 mode was deduced from a 1H NMR study of protected gramicidin S derivatives and was actually found in the crystal structures of the diacylated gramicidin S.     

Metal elution and content of fused slags produced from incinerated ash

In recent years, trials to reuse fused slags, obtained through the further treatment of incinerated ash produced in the process of the disposal of garbage or sewer sludge, such as for building materials including bricks, have drawn attention. To establish the safety of using such substances, elution tests for metals and metal contents were investigated in this study. As the result of examining 13 slags, which were made by different methods, little elution of toxic metals was found in the elution tests when water was used as a solvent. However when acid was used, there was a tendency for the elution of many kinds of metals to become greater. On other hand, the results of content measurements showed that arsenic and selenium, which were not seen to be eluted from any of the slags tested, were detected; and that aluminum and manganese existed in the slags in high concentrations.