Practical preparation of N-(1-Alkynyl)sulfonamides and their remote diastereoselective addition to aldehydes via titanation

Aliphatic and aromatic sulfonamides were alkynylated with 1-bromo-1-alkynes in the catalytic presence of CuI to give N-(1-alkynyl)sulfonamides in good to excellent yields. The acetylene-titanium complexes generated from N-(1-alkynyl)benzosultams underwent diastereoselective addition to aldehydes. [reaction: see text]     

Aqueous hydroxide as a base for palladium-catalyzed amination of aryl chlorides and bromides

The amination of aryl halides in the presence of inexpensive and air-stable alkali metal hydroxide bases and Pd[P(t-Bu)3]2 as catalyst gave arylamines in high yields. The reactions were conducted with a catalytic amount of cetyltrimethylammonium bromide as phase-transfer agent and either aqueous hydroxide or solid hydroxide in the presence of water. This combination of alkali metal hydroxide base, H2O, and the ammonium salt performed as well as NaO-t-Bu in the amination of p-chlorotoluene with dibutylamine. Hydroxide base was suitable for reactions of a wide range of aryl chlorides and bromides with aliphatic and aromatic amines. Some functional groups that were intolerant of tert-butoxide base, such as esters, enolizable ketones, nitriles, and nitro groups, were tolerated by the combination of hydroxide base, H2O, and cetyltrimethylammonium bromide in toluene solvent.     

Application of 1-alkylamines to a liquid chromatographic/turbo ionspray tandem mass spectrometric method for quantifying metabolites of a new bone anabolic agent,TAK-778, in human serum

We investigated the application of alkylamines, as additives to the mobile phase, to a quantification method for the metabolites, M-III and M-IV, of TAK-778, which is a new bone anabolic agent, in human serum using liquid chromatography/tandem mass spectrometry (LC/MS/MS). Prior to setting up the analytical method, we found that 1-alkylamines co-existing with M-III and M-IV in the turbo ionsprayed solution formed 1-alkylammonium adduct molecules of these metabolites during the ionization process, and the abundance of the adduct ions was considerably higher than that of protonated molecules ([M + H](+)s) of these metabolites. Based on these findings, we investigated a variety of 1-alkylamines and their spiked concentrations in the mobile phase for LC/MS/MS analysis to obtain higher sensitivities for the quantification of these metabolites. After these examinations, we found that 1-hexylamine at a final concentration of 0.05 mmol l(-1) was the most suitable additive for the mobile phase, and set the selected reaction monitoring (SRM) ions for the 1-hexylammonium adduct molecule and [M + H](+), allowing about a fivefold gain in the SRM chromatographic peak compared with that without 1-hexylamine. The adduct ion was considered to be formed by interaction between the amino group of 1-hexylamine and the phosphoryl group of M-III and M-IV. The internal standard (I.S.) used was deuterated M-III for each metabolite. The analytes and I.S. were extracted with diethyl ether from serum samples at neutral pH and injected into the LC/MS/MS system with a turbo ionspray interface. The limit of quantification for both analytes was 0.5 ng ml(-1) when 0.1 ml of serum was used, and the calibration curves were linear in the range 0.5-100 ng ml(-1). The method was precise; the intra- and inter-day precisions of the method were not more than 5.6%. The accuracy of the method was good, with deviations between added and calculated concentrations of M-III and M-IV being typically within 16.6%. This method provided reliable pharmacokinetic data for M-III and M-IV after the intramuscular administration of TAK-778 sustained-release formulation in humans.     

Asymmetric Hydrogenation of Isoxazolium Triflates with a Chiral Iridium Catalyst

The iridium catalyst [IrCl(cod)]₂–phosphine–I₂ (cod=1,5‐cyclooctadiene) selectively reduced isoxazolium triflates to isoxazolines or isoxazolidines in the presence of H₂. The iridium‐catalyzed hydrogenation proceeded in high‐to‐good enantioselectivity when an optically active phosphine–oxazoline ligand was used. The 3‐substituted 5‐arylisoxazolium salts were transformed into 4‐isoxazolines with up to 95:5 enantiomeric ratio (e.r.). Chiral cis‐isoxazolidines were obtained in up to 89:11 e.r., with no formation of their trans isomers, when the substrates had a primary alkyl substituent at the 5‐position. The mechanistic studies indicate that the hydridoiridium(III) species prefers to deliver its hydride to the C5 atom of the isoxazole ring. The hydride attack leads to the formation of the chiral isoxazolidine via a 3‐isoxazoline intermediate. Meanwhile, in the selective formation of 4‐isoxazolines, hydride attack at the C5 atom may be obstructed by steric hindrance from the 5‐aryl substituent.     

Electro‐conductive double‐network hydrogels

Novel electro‐conductive and mechanically‐tough double network polymer hydrogels (E‐DN gels) were synthesized by polymerization of 3, 4‐ethylenedioxythiophene in the presence of a double network hydrogel (DN gel) matrix. The E‐DN gels showed not only excellent mechanical performance, having a fracture stress of 1.4–2.1 MPa, but also electrical conductivity as high as 10^?3 S cm^?1, both under dry and water‐swollen states. The fracture stress and fracture energy of the E‐DN gel was increased by 1.7 and 3.4 times, respectively, as compared with the DN gel. From scanning electron microscope and AFM observations, it was found that electro‐conductive poly(3,4‐ethylenedioxythiophene) (PEDOT) was incorporated into DN gel matrix, apparently due to the formation of a poly‐ion complex with sulfonic acid group of the DN gel network. Thus, PEDOT incorporated into the DN gel matrix greatly improves not only electronic conductivity, but also mechanical properties, reinforcing the double network gel matrix. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Electrochemical mechanism of ion-ionophore recognition at plasticized polymer membrane/water interfaces

Here, we report on the first electrochemical study that reveals the kinetics and molecular level mechanism of heterogeneous ion-ionophore recognition at plasticized polymer membrane/water interfaces. The new kinetic data provide greater understanding of this important ion-transfer (IT) process, which determines various dynamic characteristics of the current technologies that enable highly selective ion sensing and separation. The theoretical assessment of the reliable voltammetric data confirms that the dynamics of the ionophore-facilitated IT follows the one-step electrochemical (E) mechanism controlled by ion-ionophore complexation at the very interface in contrast to the thermodynamically equivalent two-step electrochemical-chemical (EC) mechanism based on the simple transfer of an aqueous ion followed by its complexation in the bulk membrane. Specifically, cyclic voltammograms of Ag(+), K(+), Ca(2+), Ba(2+), and Pb(2+) transfers facilitated by highly selective ionophores are measured and analyzed numerically using the E mechanism to obtain standard IT rate constants in the range of 10(-2) to 10(-3) cm/s at both plasticized poly(vinyl chloride) membrane/water and 1,2-dichloroethane/water interfaces. We demonstrate that these strongly facilitated IT processes are too fast to be ascribed to the EC mechanism. Moreover, the little effect of the viscosity of nonaqueous media on the IT kinetics excludes the EC mechanism, where the kinetics of simple IT is viscosity-dependent. Finally, we employ molecular level models for the E mechanism to propose three-dimensional ion-ionophore complexation at the two-dimensional interface as the unique kinetic requirement for the thermodynamically facilitated IT.     

Planarity recognition of cationic dyes by anionic, crystalline bilayer aggregates

Steric selectivity in terms of molecular planarity of cationic dyes was investigated using anionic bilayer aggregates. Planar cationic dye (para-type stilbazolium) could be incorporated into the hydrophobic region of anionic crystalline bilayer aggregates, whereas structurally related, less planar dyes (ortho-type stilbazolium) could not be incorporated in spite of somewhat higher hydrophobicity resulting from lengthening of the N-alkyl group.     

HPLC determination of cis-diamminedichloroplatinum(II) in plasma and urine with UV detection and column-switching

A method for determining cis-diamminedichloroplatinum(II) (CDDP), an anticancer drug, in plasma and urine by HPLC with UV detection and column-switching has been developed. Typical conditions were as follows. An apparatus was composed of two columns, two pumps, a UV detector, a sample injector with a 100 microL loop, a switching valve, a column oven and a recorder. A Rheodyne model 7125 sample injector was used as the switching valve. A precolumn (4.6 mm ID x 25 cm) was packed with MCI GEL CK10S (a strong cation exchanger), and an analytical column (4.6 mm ID x 5 cm) was packed with MCI GEL CDR10 (a strong anion exchanger). Both columns were connected in series via the switching valve. The CDDP-containing fraction of the effluent from the precolumn was loaded to the analytical column by column-switching and the effluent from the analytical column was monitored at 210 nm. An eluent of 0.3 M sodium dihydrogen phosphate was pumped at a flow rate of 1 mL/min and the columns were maintained at 40 degrees C. CDDP was eluted at about 11 min and the identity of the peak of CDDP on the chromatogram was confirmed by its 3-dimensional chromatogram and analysis of platinum in the column effluent. Under the conditions described above, a linear relationship was obtained between peak height and concentration of CDDP up to 100 microM. Correlation efficients were 0.998 for plasma and 0.999 for urine. The detection limit was 0.1 microM for CDDP in both plasma and urine (S/N = 3,0.005 AUFS). The reproducibility was within 3% for 10 determinations.(ABSTRACT TRUNCATED AT 250 WORDS)     

Fabrication of Periodic Waveguides Using Organic Crystals and Fluorinated Polyimides for Quasi-Phase-Matched Second-Harmonic Generation

We have developed a new method to fabricate periodic waveguide structures used for quasi-phase-matched second-harmonic generation, where nonlinear optical organic crystals and fluorinated copolyimides are alternately arranged. Quasi-phase-matched second-harmonic generation from an organic waveguide device has been demonstrated.     

A variational approach to distribution function theory

We present a novel formalism for the generation of integral equations for the distribution functions of fluids. It is based on a cumulant expansion for the free energy. Truncation of the expansion at theKth term and minimization of the resulting approximation leads to equations for the distribution functions up toKth order.The formalism is not limited to systems with two-body interactions and does not require the addition of closure relations to yield a complete set of equations. In fact, it automatically generates superposition approximations, such as the Kirkwood three-body superposition approximation or the Fisher-Kopeliovich four-body one.The conceptual approach is adapted from the cluster variation method of lattice theory.