High density excitons in tracks of energetic charged particles in CuCl

The luminescence induced by heavy charged particle irradiation has been measured. The bi-exciton lines (M_T and M_L) and the line at 3926 Å were observed. It is concluded that these lines arise from the densely excited region in particle tracks.     

Virtual miscibility gap and interdiffusion coefficient in iron-nickel invar alloys

Fe-Ni Invar alloys exhibit anomalies in thermodynamic and physical properties at high temperatures. This is considered to result from the tendency to two-phase separation in the fcc phase. This idea is supported also by interdiffusion experiments in the Fe-Ni system, where the interdiffusion coefficient is anomalously small in the Invar region at lower temperatures. A simple theory of regular solutions based on a pair interaction model is applied to the Fe-Ni system; with the assumption of two gamma states this gives a miscibility gap in the Invar region.     

Preparation of Pb2CrO5 thin films by an electron-beam evaporation technique

Pb₂CrO₅ thin films have been prepared by an electron-beam evaporation deposition technique on glass substrates using ceramic disks. The thin film fabrication conditions are studied by x-ray diffraction, replica electron micrography and scanning electron microscopy as parameters of substrate temperature, annealing temperature and annealing time. As-deposited Pb₂CrO₅ thin films in the amorphous state are crystallized by heat treatment. Annealed thin films are structurally classified into three types according to the preferred orientations which depend on substrate temperatures (T _s:

1. (i)

   (020) atT _s=room temperature

2. (ii)

   mainly (310) atT _s=100 ‡C, and

3. (iii)

   (200) atT _s=350 ‡C.

The substrate temperature contributes to film orientations; annealing temperature and time-enhance film crystallinity. The annealing temperature is fixed between 400 and 500 ‡C in making appropriate Pb₂CrO₅ thin films. These thin films, ranging between 0.3 and 2.0 Μm in thickness, are prepared at a deposition rate of 1500 å/m.

     

Collinear fast atomic-beam laser spectroscopy at riken garis/igisol

We have constructed a fast atomic-beam collinear laser spectroscopy system connected to the on-line isotope separator facility GARIS/IGISOL at RIKEN. This system is potentially powerful in studying refractory elements. To test the system, an off-line collinear experiment was made on stable Hf isotopes produced by means of laser ablation technique. For production of radioactive Hf isotopes, the use of the inverse kinematics of a fusion reaction,⁹Be(¹⁶⁶Er,xn)^175-x Hf, was investigated. The radioactive isotope¹⁶⁹Hf was successfully extracted from GARIS/IGISOL and accelerated up to 30 keV.     

Quarkonia at Finite T: An Approach Based On QCD Sum Rules and the Maximum Entropy Method

Quarkonium spectral functions at finite temperature are studied, making use of a recently developed method of analyzing QCD sum rules by the maximum entropy method. This approach enables us to directly obtain the spectral function from the sum rules, without having to introduce any specific assumption about its functional form. QCD sum rules for heavy quarkonia incorporate finite temperature effects in form of changing values of the various gluonic condensates that appear in the operator product expansion. These changes depend on the energy density and pressure at finite temperature, which we extract from quenched lattice QCD calculations. As a result, it is found that the charmonium ground states of both S-wave and P-wave channels dissolve into the continuum already at temperatures around or slightly above the critical temperature T _c , while the bottomonium states are less influenced by temperature effects, surviving up to about 2.5 T _c or higher for S-wave and about 2.0 T _c for P-wave states.     

Development of a “Built-in” Scanning Near Field Microscope Head for an Atomic Force Microscope System and Stress Mapping of an Al2O3/ZrO2 Eutectic Composite

We constructed a scanning near-field optical microscope (SNOM) on a commercially available atomic force microscopy (AFM) apparatus (SPM-9500J2; Shimadzu Corp.) to measure the stress distribution in ceramic composite materials. Features of our SNOM system are: (1) a compact SNOM head substituted for the original AFM head; (2) a wide scanning range (125 × 125 μm²) inherited from the original scanner; (3) use of conventional shear-force regulation; (4) an optical system for the illumination-collection (I-C) mode; (5) excitation by a 488 nm line of an Ar-ion laser, and (6) light detection by photon counting or a polychromator equipped with an electronically cooled charge coupled device (CCD). This SNOM system was used to measure the surface structure and stress distribution of an Al₂O₃/ZrO₂ eutectic composite. We simultaneously measured topographic images and fluorescence spectra of an Al₂O₃/ZrO₂ eutectic composite. We estimated its peak intensity, peak position, and peak width from the fluorescence spectrum during scanning, which respectively correspond to the abundance of Al₂O₃, stress in the grain, and the anisotropy of that stress. Mapping images showed that the stress and its anisotropy were weaker in the center of the Al₂O₃ grain than its boundary between Al₂O₃ and ZrO₂. That observation suggests that Al₂O₃ underwent intense anisotropic stress induced by volume expansion in the phase transition of ZrO₂ from the cubic phase to the monoclinic phase during preparation.     

Pre-filtering Effect in an Iterative Deconvolution Method and Its Application to Signal Recovery in Fiber-Optic Distributed Temperature Sensors

The signal quality of a fiber-optic distributed temperature sensor based on optical time domain reflectometry (OTDR) is improved using a pre-filtering technique in the iterative deconvolution method. Investigation of the performance is proposed using iteration conditions in which recovery rate of the signal-component is equal to that of the unfiltering technique. The recovered signal in the pre-filtering technique gives a good signal-to-noise ratio (SNR), 3 times of the unfiltered signal. Consequently, improvements in the OTDR signal with SNR of from 10 to 100 are obtained under the iterations for both distance and temperature resolutions.     

Spallation ultracold neutron source of superfluid helium below 1 K

For the production of high-density ultracold neutrons (UCNs), we placed 0.8 K superfluid helium in a cold neutron moderator. We resolved previous heat-load problems in the spallation neutron source that were particularly serious below 1 K. With a proton-beam power of 400 MeV×1 μA, a UCN production rate of 4 UCN cm(-3) s(-1) at the maximum UCN energy of E(c)=210 neV and a storage lifetime of 81 s were obtained. A cryogenic test showed that the production rate can be increased by a factor of 10 with the same storage lifetime by increasing the proton-beam power as well as (3)He pumping speed.     

Neutron electric dipole moment measurement with a buffer gas comagnetometer

A neutron EDM measurement with a comagnetometer is discussed. For magnetometry, polarized xenon atoms are injected into a cylindrical cell where a cylindrically symmetric magnetic field and an electric field are applied for the EDM measurement. The geometric phase effect (GPE), which originates from particle motion in a magnetic field gradient, is analyzed in terms of the Dyson series. The motion of the xenon atom is largely suppressed because of a small mean free path. The field gradient is controlled by means of NMR measurements, where the false effect of Earth?s rotation is removed. As a result, the GPE is reduced below 10⁻²⁸e cm${10}^{-28}e\text{cm}$.