Dispersion resulting from phase and amplitude errors in arrayed-waveguide grating multiplexers-demultiplexers

We report dispersion resulting from phase and amplitude errors in arrayed-waveguide grating (AWG) multiplexers-demultiplexers. We measure the phase- and amplitude-error distributions of two different types of AWG and discuss their effects on the dispersion. The results show that the origin of the dispersion in the AWG is the low-order Fourier components of the symmetric phase and the antisymmetric amplitude errors. We also discuss the dependence of the dispersion on the passband shape in the presence of the same fabrication errors.     

Real three-dimensional microstructures fabricated by photopolymerization of resins through two-photon absorption

Effective energy windows for two-photon absorption (TPA) photopolymerization of resins were investigated and, with a properly selected laser pulse energy, exquisite three-dimensional (3D) microstructures with submicrometer spatial resolution were achieved. The results show the inherent utility of TPA in the fabrication of real 3D patterns. In particular, we propose and utilize a resin pre-exposure technique by which freely movable components affixed to an axle are built, demonstrating a new application of TPA in laser microfabrication.     

Peumusolide A, unprecedented NES non-antagonistic inhibitor for nuclear export of MEK

A new polyketide peumusolide A was disclosed as an unprecedented NES non-antagonistic inhibitor for nuclear export of MEK, a promising scaffold for antitumor agents with novel mechanism of action, from Peumus boldus Molina. The absolute stereostructure as well as optical purity was established by use of the two synthesized enantiomeric model lactones. In addition, the Δε values in their CD spectra were demonstrated to be the conclusive index for determination of not only configuration at C-3 but also optical purity of natural congeneric polyketides. Peumusolide A was revealed to show NES non-antagonistic action by the biotinylated probe and to inhibit proliferation of MEK-activated tumor cells selectively.     

Printed circuit rat-race-type directional couplers for larger power-split ratio

Two different types of 5/2-wavelength rat-race-type directional couplers with a remarkably increased power-split ratio for a realizable ring-impedance, in particular which are useful for millimeter-wave circuits suffering from the severe restriction on the usable impedance range, are described. Experimental corroboration is provided in the microwave region (at 8 GHz).     

Synthetic studies on psiguadial B: Construction of bicyclo[4.3.1]decane skeleton via double cyclization reaction of alkyne dicobalt complex

A new method for constructing the polycyclic skeleton of psiguadial B (1), a meroterpenoid isolated from an evergreen shrub of Myrtaceae, was developed. The terpenoid substructure of 1 was constructed on the basis of a cascade double cyclization reaction of an alkyne dicobalt complex, which afforded the bicyclo[4.3.1]decane derivative having a benzyl group with the correct configuration. The substituted aromatic ring was introduced to the bridgehead position of the intermediate, and bromination under radical conditions followed by intramolecular cyclization reaction resulted in formation of the benzopyran moiety in a stereoselective manner.     

Experimental investigation on tunnel sonic boom

Upon the entrance of a high-speed train into a relatively long train tunnel, compression waves are generated in front of the train. These compression waves subsequently coalesce into a weak shock wave so that a unpleasant sonic boom is emitted from the tunnel exit. In order to investigate the generation of the weak shock wave in train tunnels and the emission of the resulting sonic boom from the train tunnel exit and to search for methods for the reduction of these sonic booms, a 1300 scaled train tunnel simulator was constructed and simulation experiments were carried out using this facility.In the train tunnel simulator, an 18 mm dia. and 200 mm long plastic piston moves along a 40 mm dia. and 25 m long test section with speed ranging from 60 to 100 m/s. The tunnel simulator was tilted 8° to the floor so that the attenuation of the piston speed was not more than 10 % of its entrance speed. Pressure measurements along the tunnel simulator and holographic interferometric optical flow visualization of weak shock waves in the tunnel simulator clearly showed that compression waves, with propagation, coalesced into a weak shock wave. Although, for reduction of the sonic boom in prototype train tunnels, the installation of a hood at the entrance of the tunnels was known to be useful for their suppression, this effect was confirmed in the present experiment and found to be effective particularly for low piston speeds. The installation of a partially perforated wall at the exit of the tunnel simulator was found to smear pressure gradients at the shock. This effect is significant for higher piston speeds. Throughout the series of train tunnel simulator experiments, the combination of both the entrance hood and the perforated wall significantly reduces shock overpressures for piston speeds ofu _p ranging from 60 to 100 m/s. These experimental findings were then applied to a real train tunnel and good agreement was obtained between the tunnel simulator result and the real tunnel measurements.     

High molar mass silicone rubber reinforced with montmorillonite clay masterbatches: Morphology and mechanical properties

Rubber composites were obtained from natural (MT) or organomodified (O-MT) montmorillonite clay masterbatches and high molar mass poly(dimethylsiloxane)-gum (PDMS). The masterbatches were prepared by compounding MT or O-MT with a siloxane-polyether surfactant. The rubber composites were characterized by X-ray diffraction, small angle/wide angle X-ray scattering, scanning and transmission electron microscopies and tensile tests. The results showed that masterbatch compounding with O-MT improved the dispersion of this clay into the PDMS matrix. The morphology of the resulting composite showed a combination of intercalated and partially exfoliated clay layers with occasional clay aggregates. The addition of only 5 phr of O-MT into the PDMS matrix, via masterbatch compounding, improved the tensile strength as much as that obtained with the composite filled with 30 phr of O-MT clay prepared by the direct addition of the clay to PDMS. Moreover, the elongation at break was improved by at least 126%.     

Carbon sources of natural cyanamide in Vicia villosa subsp. varia

The 13C labels of [13C]carbon dioxide and D-[13C?]glucose were incorporated into cyanamide (NH?CN) when they were administered to Vicia villosa subsp. varia shoots. In contrast, the administration of sodium [2,3-13C?]pyruvate did not affect the relative area of the [M + 1]+ ion of cyanamide in the gas chromatography-mass spectrometry analysis. [2,3-13C?]pyruvate was incorporated into organic acids that are part of the citric acid cycle, such as succinate and fumarate, confirming that the shoots absorbed and metabolised it. These observations demonstrated that the carbon atom of cyanamide is derived from any of the carbohydrates that are present upstream of pyruvate in the metabolic pathway.     

Preparation of Enzymatically Recyclable Hydrogels Through the Formation of Inclusion Complexes of Amylose in a Vine‐Twining Polymerization

In this paper, we describe the preparation of hydrogels through the formation of an inclusion complex of amylose in a vine‐twining polymerization. This is achieved by the phosphorylase‐catalyzed polymerization of α‐D ‐glucose 1‐phosphate from maltoheptaose primer, in the presence of a water‐soluble copolymer having hydrophobic graft‐chains (poly(acrylic acid sodium salt‐graft‐δ‐valerolactone)). The mixture turns into a gel during the polymerization process. Evaluation of the hydrogels is conducted by shear‐viscosity measurements of the products. For the hydrogels with relatively high viscosities, fast relaxation modes of the cooperative diffusions are observed by scanning microscopic light scattering measurements, which indicate the nanometer‐size network structures of the hydrogels. In addition, we found that the enzymatic disruption and reproduction of the hydrogels are achieved by the combination of the amylase‐catalyzed hydrolysis of the amylose component and the formation of amylose by the phosphorylase‐catalyzed polymerization.