Quantum master equation method based on the broken-symmetry time-dependent density functional theory: application to dynamic polarizability of open-shell molecular systems

A novel method for the calculation of the dynamic polarizability (α) of open-shell molecular systems is developed based on the quantum master equation combined with the broken-symmetry (BS) time-dependent density functional theory within the Tamm-Dancoff approximation, referred to as the BS-DFTQME method. We investigate the dynamic α density distribution obtained from BS-DFTQME calculations in order to analyze the spatial contributions of electrons to the field-induced polarization and clarify the contributions of the frontier orbital pair to α and its density. To demonstrate the performance of this method, we examine the real part of dynamic α of singlet 1,3-dipole systems having a variety of diradical characters (y). The frequency dispersion of α, in particular in the resonant region, is shown to strongly depend on the exchange-correlation functional as well as on the diradical character. Under sufficiently off-resonant condition, the dynamic α is found to decrease with increasing y and/or the fraction of Hartree-Fock exchange in the exchange-correlation functional, which enhances the spin polarization, due to the decrease in the delocalization effects of π-diradical electrons in the frontier orbital pair. The BS-DFTQME method with the BHandHLYP exchange-correlation functional also turns out to semiquantitatively reproduce the α spectra calculated by a strongly correlated ab initio molecular orbital method, i.e., the spin-unrestricted coupled-cluster singles and doubles.     

"Clickable" pillar[5]arenes

Introduction of bulky substituents such as benzyl and pyrenyl groups using click reactions inhibited or slowed the rotation of the units on the NMR chemical shift timescale. The perpyrenylated pillar[5]arene showed a thermally-responsive excimer emission, but a unit model of the perpyrenylated pillar[5]arene did not exhibit such a response.     

Simultaneous molecular imaging based on electron paramagnetic resonance of 14N- and 15N-labelled nitroxyl radicals

The major advancement outlined in this communication is the simultaneous visualisation of two kinds of nitroxyl radicals using electron paramagnetic resonance (EPR) spectroscopy and imaging.     

Dehydrogenative oxidation of primary and secondary alcohols catalyzed by a Cp*Ir complex having a functional C,N-chelate ligand

A new catalytic system for the dehydrogenative oxidation of alcohols using a Cp*Ir complex having a functional C,N-chelate ligand has been developed. With this catalytic system, both primary and secondary alcohols were efficiently converted to aldehydes and ketones, respectively. Mechanistic investigations of this catalytic system have revealed that the catalytically active species is a hydrido iridium complex with a functional C,N-chelate ligand.     

Precise synthesis of thermo-responsive and water-soluble star-branched polymers and star block copolymers by living anionic polymerization

A series of thermo-responsive and water-soluble 4- and 8-arm star-branched poly(2-(2′-methoxyethoxy)ethyl methacrylate) (poly(1)) with well-defined structures were synthesized by living anionic polymerization of 1, followed by a linking reaction with a core compound substituted with either four or eight benzyl bromide moieties. Furthermore, two kinds of sequentially different 4-arm star block copolymers composed of poly(1)-block-poly ((2,2-dimethyl-1,3-dioxolan-4-yl)methyl methacrylate) (poly(4)) were also synthesized by the same linking reaction of the corresponding AB or BA diblock copolymer anion with a core compound substituted with four benzyl bromide moieties. Thus, both well-defined 4-arm (AB)₄ and (BA)₄ star-block copolymers, whose A and B are poly(1) and poly(4) segments, were successfully synthesized. These star-block copolymers were quantitatively converted to the corresponding 4-arm (AC)₄ and (CA)₄ star-block copolymers with the same compositions by hydrolytic acetal cleavage of the poly(4) segment to poly(2,3-dihydroxypropyl methacrylate) (C segment). Poly(1) segments have LCST values and, on the other hand, both water-insoluble poly(4)s and water-soluble poly(2,3-dihydroxypropyl methacrylate)s are non-thermo-responsive segments. The thermo-responsive behavior of the resulting 4- and 8-arm star-branched poly(1) as well as the 4-arm (AB)₄, (BA)₄, (AC)₄, and (CA)₄ star-branched block copolymers has been extensively studied in terms of molecular weight, arm number, composition, and block sequence. As expected, such variables were observed to affect their LCST values. Interestingly, the thermo-responsive behavior of the 4-arm (AC)₄ and (CA)₄ stars was different from that of the block copolymers used as arm segments.     

Sales distribution of consumer electronics

Using the uniform most powerful unbiased test, we observed the sales distribution of consumer electronics in Japan on a daily basis and report that it follows both a lognormal distribution and a power-law distribution and depends on the state of the market. We show that these switches occur quite often. The underlying sales dynamics found between both periods nicely matched a multiplicative process. However, even though the multiplicative term in the process displays a size-dependent relationship when a steady lognormal distribution holds, it shows a size-independent relationship when the power-law distribution holds. This difference in the underlying dynamics is responsible for the difference in the two observed distributions.     

Synthesis of syndiotactic‐rich star‐shaped poly(methyl methacrylate) by core‐first group transfer polymerization using N‐(trimethylsilyl)bis(trifluoromethanesulfonyl)imide

The N‐(trimethylsilyl)bis(trifluoromethanesulfonyl)imide‐catalyzed (Me₃SiNTf₂‐catalyzed) group transfer polymerization (GTP) of methyl methacrylate (MMA) has been studied for synthesizing stereospecific star‐shaped poly(methyl methacrylate)s (PMMAs). The catalytic property of Me₃SiNTf₂ for the GTP of MMA using 1‐methoxy‐1‐trimethylsilyloxy‐2‐methyl‐propene as the initiator was confirmed by a kinetic investigation and matrix‐assisted laser desorption ionization time‐of‐flight mass spectrometry measurement. The initiating efficiency (f) of Me₃SiNTf₂ was 0.94–1.00, which was estimated by the value of M_n(calcd)/M_n(SEC). The Me₃SiNTf₂‐catalyzed GTP of MMA was carried out using initiators possessing three, four, and six MTS groups (MTS₃, MTS₄, and MTS₆, respectively) under the condition of [MMA]₀/[MTS₃, MTS₄, or MTS₆]₀ = 120 at ?55 °C. All the obtained PMMAs exhibited unimodal and narrow molecular weight distributions as M_w/M_ns = 1.03–1.04 and the M_w(MALS)s of the 3‐, 4‐, and 6‐armed star‐shaped PMMAs (PMMA₃, PMMA₄, and PMMA₆, respectively) were 12.9, 12.9, and 13.4 kgmol^?1, respectively, which fairly agreed with the calculated M_w(calcd) values. The syndiotacticities, rrs, of PMMA₃, PMMA₄, and PMMA₆ were in the range of 87–89%. The stereoblock synthesis of PMMA₃, PMMA₄, and PMMA₆ was performed by the first and second polymerizations at ?55 and 45 °C; the rrs of the first and second PMMA blocks were 87.0, 87.0, and 86.0% and 65.0, 65.0, and 64.0%, respectively. The glass transition temperatures (T_gs) were 118.1, 115.8, and 111.5 °C for the respective syndiotactic‐rich PMMA₃, PMMA₄, and PMMA₆ and 111.5, 109.7, and 107.6 °C for the respective stereoblock ones. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Mechano- and Photoresponsive Behavior of a Bis(cyanostyryl)benzene Fluorophore

The mechanoresponsive behavior and photochemical response of a new bis(cyanostyryl)benzene fluorophore (CSB-5) were investigated. Green fluorescence with λ_em,max of 507 nm was found for CSB-5 in chloroform solution, mirroring the behavior of a previously reported similar dye (CSB-6). Alternatively, crystalline samples of CSB-5 exhibited orange fluorescence with λ_em,max of 620 nm, attributable to excimer emission. Although the emission color change was not clearly noticeable by naked eye, CSB-5 exhibited mechanochromic luminescence, due to transformation into the amorphous state upon grinding the crystalline powder. Interestingly, rubbed films of CSB-5 prepared on glass substrates exhibited a pronounced emission color change from orange to green when exposed to UV light. This response is the result of a photochemical reaction that occurs in the amorphous state and which causes a decrease of the excimer emission sites so that the emission color changes from excimer to monomer. The crystalline material did not display such a photoinduced emission color change and the difference in photochemical reactivity between crystalline and amorphous states was exploited to pattern the emission color of rubbed films.     

Local interaction imaging by SiGe quantum dot probe

Local interaction imaging of cleaved InAs surface (110) using a high aspect ratio (HAR) SiGe quantum dot (QD) probe was demonstrated by frequency-modulation mode noncontact atomic force microscopy under atmospheric pressure. The local contrast image with pronounced brightness is mainly attributed to no contact potential difference between the HAR SiGe-QD probe apex and the sample surface, and low frequency-change of the HAR SiGe-QD probe.     

On‐line sample preconcentration by polarity switching in floating electrode‐integrated microchannel

In this study, we found that the polarity switching was effective to enrich and separate fluorescent analytes which have weakly‐dissociated groups in a floating platinum electrode (width, 50 µm; thickness, 2.5 µm)‐integrated straight‐channel in microchip electrophoresis (MCE). In the straight channel filled with an Alexa Flour 488 (AF488) solution, a sharp peak was observed after the polarity inversion with a 530‐fold enhancement of the sensitivity relative to the conventional MCE analysis. By using a fluorescent pH indicator, we verified that a sharp high‐pH zone was generated nearby the floating electrode and moved toward the anode with maintaining the high pH, which induced the sample enrichment like a dynamic pH junction mechanism. In the floating electrode‐embedded channel, the mixture of AF488‐labeled proteins was also well concentrated and separated within 100 s.