Insoluble monolayers of irisresorcinol at the air/water interface

Monolayer properties of irisresorcinol [5-(cis-10-heptadecenyl) resorcinol] were measured at the air/water interface. TheA-T isobars of the monolayers at 10 and 15 mN/m gave two-dimensional thermal expansivities of 1.4 × 10^–4/K and 1.3 × 10^–4/K at a temperature span from 7–40 C, respectively. The- A isotherms of the material showed only a little dependence on temperature from 5–35 C and onpH except at highpH, where monolayers expanded by ionization of resorcinol headgroups. Some types of saccharose in the subphase exhibited a characteristic interaction with irisresorcinol in monolayers, and there is a possibility that this material will be used for molecular recognition of some saccharoses.     

Inter- and intramolecular activation of aromatic C-H bonds by diphosphine and hydrido-bridged dinuclear iridium complexes

Reactions of [(Cp*Ir)2(mu-dmpm)(mu-H)2]2+ (1) with NaOtBu in aromatic solvent at room temperature give [(Cp*Ir)(H)(mu-dmpm)(mu-H)(Cp*Ir)(Ar)]+ [Ar = Ph (3), p-Tol (4a), m-Tol (4b), 2-furanyl (5a), 3-furanyl (5b)] via intermolecular aromatic C-H activation. Treatment of [(Cp*Ir)2(mu-dppm)(mu-H)2]2+ (2) with base (Et2NH) results in intramolecular C-H activation of the phenyl group in the dppm ligand to give [(Cp*Ir)(H){mu-PPh(C6H4)CH2PPh2}(mu-H)(Cp*Ir)]+ (6). The structures of 3, 5a, and 6 have been determined by X-ray diffraction methods.     

A Puckered Singlet Cyclopentane‐1,3‐diyl: Detection of the Third Isomer in Homolysis

In the photochemical denitrogenation of 1,4‐diaryl‐2,3‐diazabicyclo[2.2.1]heptane ( AZ6 ) bearing sterically hindered substituents, a curious new absorption band at about 450 nm was observed under low‐temperature matrix conditions, together with the previously well‐characterized planar singlet diradical pl‐¹ DR6 with λ_max=≈580 nm. The 450 nm species was electron paramagnetic resonance (EPR)‐silent. Instead of generating the planar diradical pl‐¹ DR6 and the precursor azoalkane AZ6 upon warming, the ring‐closed bicyclo[2.1.0]pentane derivative SB6 , that is, the AZ6 denitrogenation product was identified. Based on product analysis, low‐temperature spectroscopic observations, high‐level quantum‐mechanical computations, viscosity effect, and laser‐flash photolysis, the puckered singlet diradicaloid puc‐¹ DR6 was assigned to the new 450 nm absorption. The latter was detected experimentally at the same time as the planar singlet diradical pl‐¹ DR6 . Sterically demanding substituents as well as viscosity impediments were essential for the detection of the experimentally hitherto unknown puckered singlet cyclopentane‐1,3‐diyl diradicaloid puc‐¹ DR6 , that is, the third isomer in homolysis. The present findings should stimulate future work on the mechanistically fascinating stereoselectivity documented in the formation of bicyclo[2.1.0]pentanes during the 2,3‐diazabicyclo[2.2.1]heptane denitrogenation.     

Synthesis of end‐functionalized polyethers by phosphazene base‐catalyzed ring‐opening polymerization of 1,2‐butylene oxide and glycidyl ether

For the living ring‐opening polymerization (ROP) of epoxy monomers, the catalytic activity of organic superbases, tert‐butylimino‐tris(dimethylamino)phosphorane, 1‐tert‐butyl‐2,2,4,4,4‐pentakis(dimethylamino)‐2Λ⁵,4Λ⁵‐catenadi(phosphazene), 2,8,9‐triisobutyl‐2,5,8,9‐tetraaza‐1‐phosphabicyclo[3.3.3]undecane, and 1‐tert‐butyl‐4,4,4‐tris(dimethylamino)‐2,2‐bis[tris(dimethylamino)phosphoranylidenamino]‐2Λ⁵,4Λ⁵‐catenadi(phosphazene) (t‐Bu‐P₄), was confirmed. Among these superbases, only t‐Bu‐P₄ showed catalytic activity for the ROP of 1,2‐butylene oxide (BO) to afford poly(1,2‐butylene oxide) (PBO) with predicted molecular weight and narrow molecular weight distribution. The results of the kinetic, post‐polymerization experiments, and MALDI‐TOF MS measurement revealed that the t‐Bu‐P₄‐catalyzed ROP of BO proceeded in a living manner in which the alcohol acted as the initiator. This alcohol/t‐Bu‐P₄ system was applicable to the glycidol derivatives, such as benzyl glycidyl ether (BnGE) and t‐butyl glycidyl ether, to afford well‐defined protected polyglycidols. The α‐functionalized polyethers could be obtained using different functionalized initiators, such as 4‐vinylbenzyl alcohol, 5‐hexen‐1‐ol, and 6‐azide‐1‐hexanol. In addition, the well‐defined cyclic‐PBO and PBnGE were successfully synthesized using the combination of t‐Bu‐P₄‐catalyzed ROP and click cyclization. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Activation of stable polymeric esters by using organo‐activated acyl transfer reactions

In this study, we succeeded in the in situ activation of nonactivated ester moieties embedded in polymer structures. Although poly(pentafluorophenyl methacrylate) (PPFPMA) can react with 2‐ethylhexylamine at 50 °C in the presence of proton scavenger such as NEt₃, such conditions were not suitable for poly(phenyl methacrylate) (PPhMA). Nevertheless, the combination of organo‐activating agents, namely 1,8‐diazabicyclo[5.4.0]undec‐7‐ene (DBU) and 1,2,4‐triazole (TZ) led to a facile conversion from ester to amide for PPhMA. The reaction between PPhMA and 2‐ethylhexylamine was conducted at 120 °C in the presence of one equivalent of TZ and three equivalents of DBU and yielded >99% ester conversion to afford corresponding polymethacrylamide derivatives as confirmed by FT‐IR and ¹H NMR measurements. In addition, poly(2,2,2‐trifluoroethyl methacrylate) (PTFEMA) and poly(methyl methacrylate) (PMMA) were also allowed to react with amines in the presence of the organo‐activating agents with dramatically increased conversions (>70%). © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1353–1358     

Palladium-Catalyzed Decarboxylative Alkynylation of α-Acyloxyketones by C(sp3)−O Bond Cleavage

Palladium-catalyzed decarboxylative alkynylation of α-acyloxyketones triggered by C(sp³)−O bond cleavage is disclosed. The decarboxylation strategy featuring a neutral reaction condition enabled an unprecedent catalytic alkynylation of a ketone enolate. The reaction was applied to a variety of substrates, giving desired products in good yields. We successfully obtained X-ray crystallography of a new palladium–enolate intermediate that was synthesized by a reaction of [Pd(cod)(CH₂TMS)₂] with XPhos and α-acyloxyketone at room temperature, indicating facile C(sp³)−O bond disconnection.     

Synthesis and Cation-Binding Properties of (1→6)-2,5-Anhydro-D-glucitol with 3,4-Di-O-Pentyl and Decyl Groups by Cyclopolymerization of 1,2:5,6-Dianhydro-D-mannitols

Abstract

The cyclopolymerizations of 1,2:5,6-dianhydro-3,4-di-O-pentyl-D-mannitol (1b) and 1,2:5,6-dianhydro-3,4-di-O-decyl-D-mannitol (1c) were carried out using BF₃OEt₂ and t-BuOK. All the resulting polymers consisted of cyclic constitutional units, i.e., the extent of cyclization was 100%. The polymer structures for the polymerization with t-BuOK were (1→6)-2,5-anhydro-3,4-di-O-pentyl-D-glucitol (2b) and (1→6)-2,5-anhydro-3,4-di-O-decyl-D-glucitol (2c), whereas those with BF₃O-decyl₂ comprised 2,5-anhydro-D-glucitols as major units along with other cyclic ones. These polymers were soluble in n-hexane, CHCl₃, and THF, but insoluble in water, which differs from the amphiphilic solubility of (1→6)-2,5-anhydro-3,4-di-O-methyl-D-glucitol (2a). The cation-binding properties of 2b and 2c were examined using alkali-metal picrates in order to compare them with those of 2a. The extraction yields for each cation decreased in the order of 2c < 2b < 2a. Every polymer exhibited a similar cation-binding selectivity in the order Cs⁺ > Rb⁺ > K⁺ ? Na⁺ > Li⁺. The ratio of K⁺ and Na⁺, K⁺/Na⁺, was 4.6 for 2a, 5.1 for 2b, and 7.1 for 2c in the increasing order 2a < 2b > 2c.     

A screw-shaped alignment of pyrene using m-calix[3]amide

m-Calix[3]amide bearing three pyrenes (1a) was prepared by the condensation reaction of 3-nonylaminobenzoic acid derivative using Ph₃PCl₂. Pyrenyl groups were found to be aligned in the screw-like fashion by m-calix[3]amide as confirmed by the X-ray crystallography. Aromatic proton signals observed at the up-field region in the ¹H NMR spectrum at low temperature indicated that pyrenyl groups in 1a are aligned in close proximity in THF solution. UV–vis absorption and fluorescence emission spectra did not show marked peak shift nor concentration fluorescence quenching compared with reference compounds implying no significant electronic interaction between pyrenyl groups. These results can be explained by the steric effect of the m-calix[3]amide platform. On the other hand, an excimer emission was observed for m-calix[3]amide having a flexible spacer between pyrene and m-calix[3]amide (1b).     

Preparation of Hyaluronic Acid Micro-Hydrogel by Biotin–Avidin-Specific Bonding for Doxorubicin-Targeted Delivery

Hyaluronic acid is a naturally ionic polysaccharide with cancer cell selectivity. It is an ideal candidate material for delivery of anticancer agents. In this study, hyaluronic acid (HA) micro-hydrogel loaded with anticancer drugs was prepared by the biotin–avidin system approach. Firstly, carboxyl groups on HA were changed into amino groups with adipic acid dihydrazide (ADH) to graft with biotin by 1-(3-dimethylaminopropyl)-3-ethylcarbodiimide hydrochloride named as HA–biotin. When HA–biotin solution mixed with doxorubicin hydrochloride (DOX·HCl) was blended with neutravidin, the micro-hydrogels would be formed with DOX loading. If excess biotin was added into the microgel, it would be disjointed, and DOX will be released quickly. The results of the synthesis procedure were characterized by ¹H-NMR and FTIR; ADH and biotin have been demonstrated to graft on the HA molecule. A field emission scanning electron microscope was used to observe morphologies of HA micro-hydrogels. Furthermore, the in vitro DOX release results revealed that the release behaviors can be adjusted by adding biotin. Therefore, the HA micro-hydrogel can deliver anticancer drugs efficiently, and the rate of release can be controlled by biotin-specific bonding with the neutravidin. Consequently, the micro-hydrogel will perform the promising property of switching in the specific site in cancer therapy.