Dioxopyrrolines. LXII. Diels-Alder reaction of 1-Aryl-4- and 5-methoxycarbonyl-1H-pyrrole-2,3-diones with various 1,3-dienes

Two new dioxopyrrolines (1-aryl-4-methoxycarbonyl-1H-pyrrole-2,3-dione 6 and the 5-methoxycarbonyl isomer 8) behaved as good dienophiles to some kind of 1,3-dienes examined. In most cases, the products were explained by the reaction where the largest lobe of HOMO of dienes reacted to the larger LUMO of dienophiles in an expected cis-endo manner. However, in the reactions of 8 with alkylbutadienes, piperylene and isoprene, abnormality in the reaction was observed, which was well explained by taking account of steric factors.     

Rearrangement reaction of N-halo-s-[(1,2-benzisoxazol-3-yl)methyl]-sulfoximine to the corresponding α-halo sulfoximine

The first example of the rearrangement reaction of N-halosulfoximine to α-halo sulfoximine is described.     

Highly active, immobilized ruthenium catalysts for oxidation of alcohols to aldehydes and ketones. Preparation and use in both batch and flow systems

A novel, highly active immobilized ruthenium catalyst, which can be successfully used in oxidation of alcohols to aldehydes and ketones, has been developed. In contrast to most immobilized catalysts, the Ru catalyst has activity that is higher than that of the original non-immobilized catalyst. In a batch system, the Ru catalyst was recovered and reused several times without loss of activity. The catalyst was also applied to a flow system, in which excellent conversions and yields were demonstrated. No leaching of Ru was observed in both cases.     

Extraction equilibrium of palladium(II) with 2-methyl-8-quinolinol into supercritical carbon dioxide fluid

The present study is concerned with the extraction behavior and equilibrium of Pd(II) with 2-methyl-8-quinolinol (HMQ) into supercritical fluid CO(2) (SF-CO(2)). Pd(II)-HMQ complex extracted from a weakly acidic solution (pH 2-3) into SF-CO(2) was determined to be Pd(MQ)(2) on the basis of a slope analysis. The extraction constant K(ex,SF) (=[Pd(MQ)(2)](SF)[H(+)](2)[Cl(-)](4)[PdCl(4)(2-)](-1)[HMQ](-2)) was determined to be 10(4.3+/-0.2) at 8.5 MPa, 45 degrees C and I=0.4 M (H,Na)Cl (1 M=1 mol dm(-3)). The distribution behavior of HMQ between an aqueous and a SF-CO(2) phase was examined so as to discuss quantitatively the extraction equilibrium. The extraction constant (K(ex,Cy)) of Pd(II) with HMQ into cyclohexane with a similar polarity to SF-CO(2) was determined and the K(ex,SF) was compared with the K(ex,Cy). Pd(II) at the concentration range of 10(-5)-10(-4) M in the aqueous solution (pH<3) containing relatively high concentration of chloride ion was found to be extracted efficiently by the SF-CO(2) extraction.     

Kinetics of transient end-to-end contact of single-stranded DNAs

The formation of the pyrene (Py) dimer radical cation (Py(2)(*+)) was used to measure the kinetics of the intrastrand end-to-end contact rates of single-stranded DNAs (ssDNAs) in the 10 nanoseconds to the tens of microseconds time range. ssDNAs labeled with Py at both ends with the lengths of 3, 6, and 9 mer were synthesized, and the two-photon ionization method was employed to generate a Py(*+), which enables the measurements of the end-to-end contact rates from 10 ns. The formation rate of Py(2)(*+) depended on the length and the sequence of the ssDNAs, and about 1 order of magnitude faster rates were observed for the T-rich ssDNAs compared to those for the corresponding length of A-rich ssDNAs, showing that ssDNA made from adenines is much more rigid than that composed of thymidines. As for the T-rich ssDNAs, the formation of Py(2)(*+) attributed to the misfolded structures was also observed, which is consistent with the configurational diffusion model suggested by Ansari and co-workers.     

Determination of p-chloronitrobenzene in plasma by reversed-phase high-performance liquid chromatography.

A simple, accurate and precise isocratic reversed-phase high-performance liquid chromatographic method was developed and validated for the determination of p-chloronitrobenzene (p-CNB) in rat plasma. A plasma sample was deproteinized with methanol containing the internal standard (p-bromonitrobenzene). The resulting methanol eluate obtained after centrifugation was filtered and injected into a high-performance liquid chromatograph (50 microliters each). A column packed with 5 microns octadecylsilane (ODS) spherical particles was used with isocratic elution of methanol-water (45:55, v/v) at a flow-rate of 1.0 ml/min. The compounds were detected by ultraviolet absorbance at 280 nm. The retention times of p-CNB and the internal standard were 12.5 and 15.5 min, respectively, at a column oven temperature of 30 degrees C. The results were linear from 0.05 to 100 micrograms/ml (r = 0.999), and the detection limit was 0.01 microgram/ml. The relative error and the coefficient of variation on replicate assays were less than 7 and 10%, respectively, for all concentrations studied. The overall recoveries of p-CNB were between 97 and 105%. Plasma samples could be stored for up to one month at -20 degrees C.     

Self-assembling structures of long-chain phenyl glucoside influenced by the introduction of double bonds

Four long-chain phenyl glucoside amphiphiles possessing a saturated or unsaturated long alkyl chain group as the self-assembling unit of a highly organized molecular architecture were synthesized. Their self-assembling properties were investigated by EF-TEM, SEM, CD, FT-IR, and XRD. Compound 2 possessing one double bond in the lipophilic portion showed twisted helical fibers, which formed a bilayered structure with a 3.59 nm period, while compound 3 showed the helical ribbons and left-handed nanotubular structures with 150-200 nm inner diameters and ca. 20 nm of wall. Very interestingly, compound 4 possessing three double bonds showed a nanotubular structure with ca. 70 nm of inner diameter through a helical ribbon, which formed a loose bilayered structure with 4.62 nm. These results indicate that self-assembling properties strongly depend on the number of cis double bonds.     

Study of flow rate in pressurized gradient capillary electrochromatography using splitter and separation of peptides using an Amide stationary phase

A pressurized gradient capillary electrochromatograph using a splitter was constructed. The variation in flow rate during gradient elution was investigated and separations of peptides using an Amide stationary phase were demonstrated. The flow rate, which is one of the important factors to control chromatographic behavior, was increased during the gradient elution, and the mismatching of mobile phase between the column and the resistance tubing derived three variation patterns in the flow rate. The electrophoretic migration in electrochromatography could enhance in separation of peptides. The separated peak number of tryptic digest of bovine serum albumin was increased from 30 to 40 by the application of +5 kV.     

Exploratory Investigations Probing a Preparatively Versatile, Pyridinium Salt Photoelectrocyclization-Solvolytic Aziridine Ring Opening Sequence

A novel pyridinium salt photoelectrocyclization-nucleophilic bicyclic aziridine ring opening reaction sequence has been investigated in order to determine its preparative potential. N-Alkylpyridinium perchlorates were found to undergo photoinduced electrocyclization upon irradiation in nucleophilic solvents, such as H(2)O and MeOH, to efficiently produce 6-alkyl-6-azabicyclo[3.1.0]hex-2-en-4-yl alcohols and ethers. The bicyclic aziridine photoproducts react with a number of different nucleophiles (e.g., H(2)O, MeOH, AcOH, AcSH) under acid-catalyzed conditions to produce 5-(nucleophile-substituted)-4-(alkylamino)cyclopenten-3-yl alcohols and ethers. The aziridine ring opening processes are both regioselective and stereoselective, yielding trans,trans-trisubstituted cyclopentenes exclusively, apparently as a consequence of the operation of an SN(2) mechanism. The effects of C-alkyl substitution on the regiochemistry of the pyridinium cation photocyclization reaction were briefly probed, and a method was developed to produce trans,cis-trisubstituted cyclopentenes by use of this tandem preparative sequence.     

Catalytic asymmetric Michael reaction of beta-keto esters: effects of the linker heteroatom in linked-BINOL

We describe the development of a general catalytic asymmetric Michael reaction of acyclic beta-keto esters to cyclic enones, in which asymmetric induction occurs at the beta-position of the acceptors. Among the various asymmetric catalyst systems examined, the newly developed La-NR-linked-BINOL complexes (R = H or Me) afforded the best results in terms of reactivity and selectivity. In general, the NMe ligand 2 was suitable for the combination of small enones and small beta-keto esters, and the NH ligand 1 was suitable for bulkier substrates (steric tuning of the catalyst). Using the La-NMe-linked-BINOL complex, the Michael reaction of methyl acetoacetate (8a) to 2-cyclohexen-1-one (7b) gave the corresponding Michael adduct 9ba in 82% yield and 92% ee. The linker heteroatom in linked-BINOL is crucial for achieving high reactivity and selectivity in the Michael reaction of beta-keto esters. The amine moiety in the NR-linked-BINOL can also tune the Lewis acidity of the central metal (electronic tuning of the catalyst), which was supported by density functional studies and experimental results. Another advantage of the NR-linked-BINOL ligand as compared with O-linked-BINOL is the ease of modifying a substituent on the amine moiety, making it possible to synthesize a variety of NR-linked-BINOL ligands for further improvement or development of new asymmetric catalyses by introducing additional functionality on the linker with the amine moiety. The efficiency of the present asymmetric catalysis was demonstrated by the synthesis of the key intermediate of (-)-tubifolidine and (-)-19,20-dihydroakuammicine in only five steps compared to the nine steps required by the original process from the Michael product of malonate. This strategy is much more atom economical. On the basis of the results of mechanistic studies, we propose that a beta-keto ester serves as a ligand as well as a substrate and at least one beta-keto ester should be included in the active catalyst complex. Further improvement of the reaction by maintaining an appropriate ratio of the La-NMe-linked-BINOL complex and beta-keto esters is also described.