Micelle structures in aqueous solutions of glucose-based surfactants having an isoprenoid-type hydrophobic chain

Surfactant self-diffusion coefficients have been measured on a binary system of 1-O-beta-3,7-dimethyloctyl-D-maltopyranoside (beta-Mal(2)(Ger))/water and a mixed surfactant system of beta-Mal(2)(Ger)/1-O-beta-3,7-dimethyloctyl-D-glucopyranoside (beta-Glc(Ger))/water at 25 degrees C. For comparison, measurements have also been made on 1-O-beta-decyl-D-maltopyranoside (beta-Mal(2)C(10))/water and beta-Mal(2)C(10)/1-O-beta-decyl-D-glucopyranoside (beta-GlcC(10))/water. The hydrodynamic radius of beta-Mal(2)(Ger) micelles obtained from the micellar diffusion coefficient is around 3 nm and nearly equal to that of beta-GlcC(10) micelles within experimental error. In the mixed surfactant systems, the hydrodynamic radii for both systems increase with increasing X(G) (the mole fraction of beta-Glc(Ger) or beta-GlcC(10) in the total mixed solute) above X(G) congruent with 0.4 when the total surfactant concentration is kept constant at 2 wt%. The R(H) of beta-Glc(Ger)/Mal(2)(Ger) micelles increases more rapidly than beta-GlcC(10)/beta-Mal(2)C(10) micelles, and then phase separation occurs at X(G) congruent with 0.65. On the other hand, the R(H) of beta-GlcC(10)/beta-Mal(2)C(10) micelles continues to increase until the phase separation occurs at X(G) congruent with 0.92. Measurements have also been performed as a function of total surfactant concentration at constant X(G) (=0.6). The CMC of the beta-Glc(Ger)/Mal(2)(Ger) system is larger than that of the beta-GlcC(10)/beta-Mal(2)C(10) system as expected from the results of the pure surfactant systems published previously. The R(H) increases with increasing total surfactant concentration for both systems. At higher concentrations, the R(H) of beta-Glc(Ger)/Mal(2)(Ger) micelles increases more rapidly than beta-GlcC(10)/beta-Mal(2)C(10) micelles. These results can be explained by the fact that the geranyl and decyl chains have the same volume but different chain lengths.     

Functional porous coordination polymers

The chemistry of the coordination polymers has in recent years advanced extensively, affording various architectures, which are constructed from a variety of molecular building blocks with different interactions between them. The next challenge is the chemical and physical functionalization of these architectures, through the porous properties of the frameworks. This review concentrates on three aspects of coordination polymers: 1). the use of crystal engineering to construct porous frameworks from connectors and linkers ("nanospace engineering"), 2). characterizing and cataloging the porous properties by functions for storage, exchange, separation, etc., and 3). the next generation of porous functions based on dynamic crystal transformations caused by guest molecules or physical stimuli. Our aim is to present the state of the art chemistry and physics of and in the micropores of porous coordination polymers.     

Rational design and crystal structure determination of a 3-D metal-organic jungle-gym-like open framework

A new three-dimensional (3-D) jungle-gym-like open metal-organic framework has been synthesized from a two-dimensional (2-D) layer compound using a heterogeneous pillar insertion reaction. Both the starting 2-D layer and the resulting 3-D open compounds have been characterized using X-ray crystallography.     

Asymmetric and efficient synthesis of homophenylalanine derivatives via Friedel-Crafts reaction with trifluoromethanesulfonic acid

An efficient Friedel-Crafts reaction of TFA-Asp(Cl)-OMe and stoichiometric amounts of benzene was established by using neat trifluoromethanesulfonic acid (TfOH) as solvent and catalyst under a mild condition. This methodology has been applied to many aromatic compounds and enabled synthesis of several homophenylalanine derivatives.     

Dispersion of Carbon Nanotubes with “Green” Detergents

Solubilization of carbon nanotubes (CNTs) is a fundamental technique for the use of CNTs and their conjugates as nanodevices and nanobiodevices. In this work, we demonstrate the preparation of CNT suspensions with “green” detergents made from coconuts and bamboo as fundamental research in CNT nanotechnology. Single-walled CNTs (SWNTs) with a few carboxylic acid groups (3–5%) and pristine multi-walled CNTs (MWNTs) were mixed in each detergent solution and sonicated with a bath-type sonicator. The prepared suspensions were characterized using absorbance spectroscopy, scanning electron microscopy, and Raman spectroscopy. Among the eight combinations of CNTs and detergents (two types of CNTs and four detergents, including sodium dodecyl sulfate (SDS) as the standard), SWNTs/MWNTs were well dispersed in all combinations except the combination of the MWNTs and the bamboo detergent. The stability of the suspensions prepared with coconut detergents was better than that prepared with SDS. Because the efficiency of the bamboo detergents against the MWNTs differed significantly from that against the SWNTs, the natural detergent might be useful for separating CNTs. Our results revealed that the use of the “green” detergents had the advantage of dispersing CNTs as well as SDS.     

Hardness and slip systems of orthorhombic hen egg-white lysozyme crystals

Hardness and slip systems by an indentation method were investigated on different habit planes of orthorhombic hen egg-white lysozyme (O-HEWL) crystals containing water. A dependence of the hardness on the water-evaporation time exhibits three stages as incubation, transition and saturated ones, as tetragonal (T)-HEWL crystals reported previously. The hardness values of (1 1 0), (0 1 0) and (0 1 1) habit planes of O-HEWL in the incubation stage or wet condition exhibits 6, 8 and 10 MPa, respectively. The hardness depends on indented planes but it is independent of the air-humidity and crystal volumes. These values correspond to the intrinsic hardness for O-HEWL crystals containing water. In the incubation stage, the slip traces are clearly observed around the indentation mark and the corresponding six kinds of slip systems are identified to be {0 1 1}<1 0 0>, {1 1 0}<1 1 0>, {0 1 1}<0 1 1>, {1 1 0}<0 0 1>, {1 0 0}<0 0 1> and {0 1 0}<0 0 1>.     

Formation of double helix self-assembled monolayers of ethynylhelicene oligomer disulfides on gold surfaces

Optically active ethynylhelicene pentamers and hexamers linked by disulfide bonds were synthesized. They formed self-assembled monolayers (SAMs) with double helix structure on gold surfaces, which were analyzed by infrared reflection-absorption spectroscopy (IR-RAS), quartz crystal microbalance (QCM), surface plasmon resonance (SPR), and circular dichroism (CD). Double helix SAMs could be formed on gold surfaces either from double helices or random coils in solution. The double helices on the surface were more stable than in solution. This result suggested the presence of strong intercomplex interactions between double helix complexes on the surface.     

Preparation and photochromism of diarylethene covalently bonded onto layered sodium-magadiite surfaces

Diarylethene derivatives (DE) covalently bonded to silanol oxygens of layered silicate surfaces, i.e., magadiite (Mag), were synthesized and investigated for their photochromic behavior. The DE-Mag layered hybrids were found to undergo reversible color change by alternating UV and visible light irradiation. A more highly efficient, reproducible photochromic behavior was realized with DE-Mag than with a corresponding DE-Si possessing silyl substituents on DE in place of the Mag surface. Moreover, the present covalently bonded DE exhibited an improvement over DE hybrids incorporated in layered double hydroxide (LDH) clays, in which the repetitive photochromic behavior decreased during alternating irradiation, due to the accumulation of the photochemically inert parallel isomers of DE.     

Chemical and Genetic Study of Ligularia cyathiceps in Yunnan Province of China

Root chemicals and evolutionarily neutral DNA regions in L. cyathiceps samples collected in the Zhongdian (Shangrila) County of Yunnan, P. R. China, were examined. Twenty compounds were isolated, including three new ones, 1β,10β‐epoxy‐6β‐(propionyloxy)furanoeremophilan‐9‐one ( 6 ), 1β,10β‐epoxy‐8α‐ethoxyeremophila‐6,11‐diene ( 14 ), and 11αH‐6β‐isobutyryloxy‐1β,10β,7β,8β‐diepoxyeremophilan‐12,8α‐olide ( 15 ). The chemical diversity was found to be limited, with cacalol ( 1 ) and 6‐(acyloxy)furanoeremophilan‐9‐ones ( 4 and/or 5 ) being major components in all the samples. The nuclear ribosomal RNA gene was also found to harbor little variation, although two distinct sequence types were found for the plastid atpB‐rbcL intergenic region.     

Acceptable range of speech level in noisy sound fields for young adults and elderly persons

The acceptable range of speech level as a function of background noise level was investigated on the basis of word intelligibility scores and listening difficulty ratings. In the present study, the acceptable range is defined as the range that maximizes word intelligibility scores and simultaneously does not cause a significant increase in listening difficulty ratings from the minimum ratings. Listening tests with young adult and elderly listeners demonstrated the following. (1) The acceptable range of speech level for elderly listeners overlapped that for young listeners. (2) The lower limit of the acceptable speech level for both young and elderly listeners was 65 dB (A-weighted) for noise levels of 40 and 45 dB (A-weighted), a level with a speech-to-noise ratio of +15 dB for noise levels of 50 and 55 dB, and a level with a speech-to-noise ratio of +10 dB for noise levels from 60 to 70 dB. (3) The upper limit of the acceptable speech level for both young and elderly listeners was 80 dB for noise levels from 40 to 55 dB and 85 dB or above for noise levels from 55 to 70 dB.