Uridine binding by Zn(II) macrocyclic complexes: diversion of RNA cleavage catalysts

Zn(II) complexes of 1-oxa-4,7,10-triazacyclododecane (12[ane]N3O), 1,5,9-triazacyclododecane (12[ane]N3), and 1-hydroxyethyl-1,4,7-triazacyclononane (9[ane]N3OH) promote cleavage of the RNA analogue, 2-hydroxypropyl-4-nitrophenyl phosphate (HpPNP) at pH 8.0, I=0.10 M (NaCl), 25 degrees C with second-order rate constants of 8.9x10(-3), 9.0x10(-3), and 3.3x10(-3) M-1 s-1, respectively. Cleavage of HpPNP by these catalysts is inhibited by uridine with inhibition constants (Ki) of 1.2, 0.46, and 45 mM, respectively, under these conditions. Binding constants derived from these inhibition constants are 2-200-fold larger than those for binding of related Zn(II) complexes to phosphate diesters under similar conditions, suggesting that uridine sequences in RNA will inhibit Zn(II)-catalyzed cleavage by competing with phosphate diester binding sites. Further studies are carried out that utilize pH-potentiometric titrations to monitor uridine binding to five Zn(II) macrocyclic complexes in aqueous solution at 25 degrees C, I=0.10 M (NaCl). The data are consistent with binding of the Zn(II) complexes to the N3-deprotonated form of uridine to give log KU.-values of 5.29, 4.57, 4.56, 3.47, and 2.65 for the Zn(II) complexes of 12[ane]N3, 12[ane]N4, 12[ane]N3O, 15[ane]N3O2, and 9[ane]N3OH, respectively (12[ane]N4=1,4,7,10-tetraazacyclododecane, 15[ane]N3O2=1,4-dioxa-7,10,13-triazacyclopentadecane). For the five Zn(II) complexes studied, there is a linear relationship between uridine anion binding constants and hydroxide binding constants.     

Electrically actuated, pressure-driven microfluidic pumps

In order to make the lab-on-a-chip concept a reality, it is desirable to have an integrated component capable of pumping fluids through microchannels. We have developed novel, electrically actuated micropumps and have integrated them with microfluidic systems. These devices utilize the build-up of electrolysis gases to achieve pressure-driven pumping, only require small voltages (approximately 10 V), and have approximate dimensions of 5 cm x 3 cm x 2 cm. Furthermore, these micropumps are composed of relatively inexpensive materials, and the reversible sealability of their poly(dimethylsiloxane) body to different microfluidic arrays enables repeated uses of the same pump. Under an applied potential of 10 V, three different micropumps had average flow rates of 8-13 microL min(-1) for water being pumped through five different 2 cm-long, 5500 microm(2) cross-sectional-area channels in poly(methyl methacrylate), in approximate agreement with predicted pump rates. We have also evaluated pump operation at the lower applied potential of 8 V and observed an average flow rate of 6.1 microL min(-1) for a pump-channel system. The current micropump design is capable of sustaining pumping pressures in the range of 300 kPa. The various advantages of these micropumps make them well suited for use in lab-on-a-chip analysis techniques.     

Six‐coordinate Co2+ with imidazole,NH3, and H2O ligands: Approaching spin crossover

Octahedral, six‐coordinate Co²⁺ can exist in two spin states: S = 3/2 and S = 1/2. The difference in energy between high spin (S = 3/2) and low spin (S = 1/2) is dependent on both the ligand mix and coordination stereochemistry. B3LYP calculations on combinations of neutral imidazole, NH₃, and H₂O ligands show that low‐spin isomers are stabilized by axial H₂O ligands and in structures that also include trans pairs of equatorial NH₃ and protonated imidazole ligands, spin crossover structures are predicted from spin state energy differences. Occupied Co d orbitals from the DFT calculations provide a means of estimating effective ligand strength for homoleptic and mixed ligand combinations. These calculations suggest that in a labile biological system, a spin crossover environment can be created. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

Well depths of XeF− and XeCl− from ion transport data

Mobility and diffusion data for F^? and Cl^? ions in Xe gas at 300 K are used to test the well depths and the “width” of the XeF^? well previously obtained by a fit to differential scattering cross sections.     

Determination of fluoride in wine by fluoride selective ion electrode, standard addition method: collaborative study

The accuracy, precision, and reproducibility of a rapid method for determination of fluoride in wine, using a fluoride selective ion electrode, were established by a collaborative study involving 12 laboratories, 5 in Europe and 7 in the United States. The laboratories assayed 6 Youden pairs of fluoride-fortified, red and white wine samples with fluoride concentrations ranging from 0.2 to 3.0 mg/L. The relative standard deviations of repeatability ranged from 1.94 to 4.88%; relative standard deviations of reproducibility ranged from 4.15 to 18.40%. HORRAT values ranged from 0.30 to 0.97. The average recovery was 99.97%. Based on the statistical results of this collaborative study, the Study Director recommends that this method be adopted First Action.     

Trimeric perfluoro-ortho-phenylenemercury: a versatile Lewis acidic host

Trimeric perfluoro-ortho-phenylenemercury (1) constitutes one of the simplest trifunctional Lewis acidic hosts. In addition to cooperative effects arising from the proximity of the mercury(II) centers, the electron-withdrawing properties of the backbone and the accessibility of the electrophilic sites lead to the facile complexation of neutral and electron rich substrates. The planarity of the structure as well as its overall polarizability compounded with relativistic effects at mercury also permits the occurrence of non-covalent interactions and accounts for the tendency of this compound to form cofacial dimers. Collectively, the Lewis acidic properties of 1 as well as its ability to engage in non-covalent interactions can be held responsible for its ability to form extended binary supramolecular stacks with arenes. The photoluminescence observed in some of these supramolecular complexes corresponds to the phosphorescence of the aromatic substrate and indicate the occurrence of a mercury heavy atom effect.     

Hafnium oxide and zirconium oxide atomic layer deposition: initial precursor and potential side-reaction product pathways with H/Si(100)-2 x 1

Hybrid density functional calculations have been carried out using cluster models of the H/Si(100)-2 x 1 surface to investigate the mechanistic details of the initial surface reactions occurring in the atomic layer deposition of hafnium and zirconium oxides (HfO2 and ZrO2). Reaction pathways involving the metal precursors ZrCl4, Zr(CH3)4, HfCl4, and Hf(CH3)4 have been examined. Pathways leading to the formation of a Zr-Si or Hf-Si linkage show a significant sensitivity to the identity of the leaving group, with chloride loss reactions being both kinetically and thermodynamically less favorable than reactions leading to the loss of a methyl group. The energetics of the Zr(CH3)4 and Hf(CH3)4 reactions are similar with an overall exothermicity of 0.3-0.4 eV and a classical barrier height of 1.1-1.2 eV. For the reaction between H2O and the H/Si(100)-2 x 1 surface, the activation energy and overall reaction enthalpy are 1.6 and -0.8 eV, respectively. Due to contamination, trace amounts of H2O may be encountered by metal precursors, leading to the formation of minor species that can lead to unanticipated side-reaction pathways. Such gas-phase reactions between the halogenated and alkylated metal precursors and H2O are exothermic with small or no reaction barriers, allowing for the possibility of metal precursor hydroxylation before the H/Si surface is encountered. Of the contaminant surface reaction pathways, the most kinetically favorable corresponds to the surface -OH deposition. Interestingly, for the hydroxylated metal precursors, a unique reaction pathway resulting in the direct formation of Si-O-Zr and Si-O-Hf linkages has been identified and found to be the most thermodynamically stable pathway available, being exothermic by approximately 1.0 eV.     

Manganese detection in marine sediments: anodic vs. cathodic stripping voltammetry

Three different electroanalytical techniques for the detection of manganese in marine sediments are evaluated. The anodic stripping voltammetry of manganese at an in situ bismuth-film-modified boron-doped diamond electrode and cathodic stripping voltammetry at a carbon paste electrode are shown to lack the required sensitivity and reproducibility whereas cathodic stripping voltammetry at a bare boron-doped diamond electrode is shown to be reliable and selective with a limit of detection, from applying a 60 s accumulation period of 7.4 × 10⁻⁷ M and a sensitivity of 0.24 A M⁻¹. The method was used to evaluate the manganese content of marine sediments taken from Šibenik, Croatia.     

FREQUENCY OF ULTRAVIOLET RADIATION-INDUCED MUTATION AT THE hprt LOCUS IN REPAIR-PROFICIENT MURINE FIBROBLASTS TRANSFECTED WITH THE denV GENE OF BACTERIOPHAGE T4

Abstract— Thc frequency of spontaneous and ultraviolet radiation (UVR)-induced mutation at the hprt locus was determined in control and denV-transfected, repair-proficient murine fibroblasts. Control cells removed an average of 25% of pyrimidine dimers induced by exposure to 150 J/m²UVR from an FS40 sunlamp within 24 h; under the same conditions of induction and repair, denV-transfected cells removed an average of 71% of pyrimidine dimers. Control cells were somewhat more resistant than denV-transfected cells to killing by UVR. The average frequency of spontancous mutation at the hprt locus for control and denV-transfected cells was 3 and 15 6-thioguanine (6-TG)-resistant colonies per 10⁶ surviving cells, respectively; there was no statistically significant difference between control and dcnV-transfected cells. However, after exposure to 75 or 150 J/m² UVR, denV-transfected cells had a significantly lower frequency of mutation to 6-TG resistance. After exposure to a fluence of 75 J/m², the average frequency of UVR-induced mutation at the hprt locus was 166 mutant colonies per lo^h surviving cells for control cells and 92 mutant colonies for denV-transfectcd cells; after 150 J/m², control cells had 205 6-TG-resistant colonies per 10⁶ cells, while dmV-transfected cclls had 61 mutant colonies. These results demonstrate that UVR-induced pyrimidine dimers are mutagenic photoproducts in mammalian cells.     

Determination of total,and bound Se in sera by INAA

In this study we report on the comparison between the total selenium in serum (total Se) with that which is apparently bound to high molecular weight (>12,000 D) species, presumably proteins (bound Se). Nine hundred seventy seven (977) serum samples arising out of a population-based epidemiological study were prepared in duplicate for the determination of total Se by pipeting directly into irradiation vials; and separate duplicate aliquots were dialyzed against DI water for the determination of bound Se. All samples were analyzed by neutron activation analysis via^77mSe (17.4 s). A small dialyzable Se component (6%) (free Se), defined as the difference between the total Se minus the bound Se, was identified.