Measurement of total Zn and Zn isotope ratios by quadrupole ICP-MS for evaluation of Zn uptake in gills of brown trout (Salmo trutta) and rainbow trout (Oncorhynchus mykiss)

This study evaluates the potential use of stable zinc isotopes in toxicity studies measuring zinc uptake by the gills of brown trout (Salmo trutta) and rainbow trout (Oncorhynchus mykiss). The use of stable isotopes in such studies has several advantages over the use of radioisotopes, including cost, ease of handling, elimination of permit requirements, and waste disposal. A pilot study using brown trout was performed to evaluate sample preparation methods and the ability of a quadrupole inductively coupled plasma mass spectrometer (ICP-MS) system to successfully measure changes in the ⁶⁷Zn/⁶⁶Zn ratios for planned exposure levels and duration. After completion of the pilot study, a full-scale zinc exposure study using rainbow trout was performed. The results of these studies indicate that there are several factors that affect the precision of the measured ⁶⁷Zn/⁶⁶Zn ratios in the sample digests, including variations in sample size, endogenous zinc levels, and zinc uptake rates by individual fish. However, since these factors were incorporated in the calculation of the total zinc accumulated by the gills during the exposures, the data obtained were adequate for their intended use in calculating zinc binding and evaluating the influences of differences in water quality parameters.     

Zoospores of Three Arctic Laminariales Under Different UV Radiation and Temperature Conditions: Exceptional Spectral Absorbance Properties and Lack of Phlorotannin Induction

Phlorotannins have often been considered to act as UV-protective compounds in zoospores of brown algae. However, only the absorption characteristics of zoospores under UV exposure have been determined and no data are available on the actual content of phlorotannins or on temperature–UV interactions. Therefore, we determined the absorbance spectra and the phlorotannin contents in zoospore suspensions of three Arctic species ( Saccharina latissima , Laminaria digitata , Alaria esculenta ), and in the media surrounding zoospores after exposure to different radiation (400–700, 320–700, 295–700 nm) and temperature (2–18°C) conditions for 8 h. Absorption typical of phlorotannins with a maximum at 276 nm was monitored in zoospore suspensions as well as in the media surrounding zoospores, but the results depended strongly on radiation treatments and on zoospore densities. Surprisingly, the content of UV-absorbing phlorotannins subsequent to different exposures did not change in any of the three species. The observed exceptional absorption properties could, therefore, not be related to phlorotannin contents. These findings are discussed in light of a strong phlorotannin investment from sporophytes during spore release and a minor UV-protective role of phlorotannins for zoospores of Arctic kelp species.     

Rheological properties of PDMS/clay nanocomposites and their sensitivity to microstructure

The effect of microstructure on the rheology of clay/polymer nanocomposites is investigated using dispersions of organically treated clay in nearly Newtonian poly(dimethylsiloxane). Degree of dispersion and floc size are altered by using two different dispersion procedures and by changing the shear history. The scaling for dynamic moduli of attractive colloids applies, except for a possible relaxation mechanism at very low frequencies. The time to reach the crossover at a given frequency is found to be extremely sensitive to the dispersion procedure used. Hydrodynamic and elastic components of the steady state stress, on the other hand, evolve in a very similar fashion for the different systems. Although the relaxation times of the elastic stress components change drastically with flow-induced changes in structure, the dispersion process hardly has an effect at all. Intermittent start-up flows in the forward and reverse directions show that anisotropy persists long after the flow has been arrested, even at shear rates where no large reversible flocs are present. The degree of dispersion only had a limited effect on the anisotropy. Finally, the effect of shear on structure recovery has been studied. Very low shear rates are found to increase the rate of recovery, even for small strains.     

Sorption of tributyltin in seawater by municipal solid waste compost

The use of municipal solid waste (MSW) compost as a sorbent for tributyltin (TBT) in seawater was investigated. TBT‐contaminated seawater, both artificially prepared and that collected from Msida Creek yacht marina (Malta), was allowed to percolate through untreated and water‐washed columns of compost and then analysed for organotins using gas chromatography‐flame photometric detection. About 90% of dissolved TBT ranging in concentration from about 800 to 8000 ng_Snl^?1 was sorbed by treating 500 ml solutions with 100 g untreated compost. On the other hand, no detectable breakthrough of TBT was observed from compost that had previously been washed by water to remove soluble organic matter. Breakthrough of TBT from unwashed compost is thought to be due to formation of complexes between the soluble organic matter in compost and aquated TBT, which renders the organotin more hydrophilic. The use of washed MSW compost as sorbent for the purification of TBT‐contaminated waters generated in large quantity during hull‐cleaning activities in drydocks is suggested as a mitigatory measure against the impact of TBT on the coastal marine environment. Copyright © 2001 John Wiley & Sons, Ltd.     

Techniques of differential scanning calorimetry for quantification of low contents of amorphous phases

Differential scanning calorimetry (DSC) is one of the most frequently used techniques for analyzing small concentrations of amorphous phases in a crystalline matrix. In recent years novel enhanced DSC approaches have been intensively looked for to improve parameters such as sensitivity, accuracy, and detection limit of the technique. Low levels of amorphous phases can be quantitatively determined in DSC by measuring the heat capacity change associated with the glass transition. In this short review the potentials provided by the HyperDSC and StepScan DSC techniques are discussed. Examples illustrate the advantages and disadvantages of the techniques and compare their abilities to detect small glass transitions and determine low contents of amorphous phases in samples which are mostly crystalline.     

MyD88-dependent and independent pathways of Toll-Like Receptors are engaged in biological activity of Triptolide in ligand-stimulated macrophages

Background  

Triptolide is a diterpene triepoxide from the Chinese medicinal plant Tripterygium wilfordii Hook F., with known anti-inflammatory, immunosuppressive and anti-cancer properties.     

Accurate mass measurement: Terminology and treatment of data

High-resolution mass spectrometry has become ever more accessible with improvements in instrumentation, such as modern FT-ICR and Orbitrap mass spectrometers. This has resulted in an increase in the number of articles submitted for publication quoting accurate mass data. There is a plethora of terms related to accurate mass analysis that are in current usage, many employed incorrectly or inconsistently. This article is based on a set of notes prepared by the authors for research students and staff in our laboratories as a guide to the correct terminology and basic statistical procedures to apply in relation to mass measurement, particularly for accurate mass measurement. It elaborates on the editorial by Gross in 1994 regarding the use of accurate masses for structure confirmation [1]. We have presented and defined the main terms in use with reference to the International Union of Pure and Applied Chemistry (IUPAC) recommendations for nomenclature and symbolism for mass spectrometry. The correct use of statistics and treatment of data is illustrated as a guide to new and existing mass spectrometry users with a series of examples as well as statistical methods to compare different experimental methods and datasets.     

A Structural Diversity of Molecular Alkaline-Earth-Metal Polyphosphides: From Supramolecular Wheel to Zintl Ion

A series of molecular group 2 polyphosphides has been synthesized by using air-stable [Cp*Fe(η⁵-P₅)] (Cp*=C₅Me₅) or white phosphorus as polyphosphorus precursors. Different types of group 2 reagents such as organo-magnesium, mono-valent magnesium, and molecular calcium hydride complexes have been investigated to activate these polyphosphorus sources. The organo-magnesium complex [(^DippBDI−Mg(CH₃))₂] (^DippBDI={[2,6-ⁱPr₂C₆H₃NCMe]₂CH}⁻) reacts with [Cp*Fe(η⁵-P₅)] to give an unprecedented Mg/Fe-supramolecular wheel. Kinetically controlled activation of [Cp*Fe(η⁵-P₅)] by different mono-valent magnesium complexes allowed the isolation of Mg-coordinated formally mono- and di-reduced products of [Cp*Fe(η⁵-P₅)]. To obtain the first examples of molecular calcium-polyphosphides, a molecular calcium hydride complex was used to reduce the aromatic cyclo-P₅ ring of [Cp*Fe(η⁵-P₅)]. The Ca-Fe-polyphosphide is also characterized by quantum chemical calculations and compared with the corresponding Mg complex. Moreover, a calcium coordinated Zintl ion (P₇)³⁻ was obtained by molecular calcium hydride mediated P₄ reduction.