Solvation properties of N-substituted cis and trans amides are not identical: significant enthalpy and entropy changes are revealed by the use of variable temperature 1H NMR in aqueous and chloroform solutions and ab initio calculations

The cis/trans conformational equilibrium of N-methyl formamide (NMF) and the sterically hindered tert-butylformamide (TBF) was investigated by the use of variable temperature gradient 1H NMR in aqueous solution and in the low dielectric constant and solvation ability solvent CDCl3 and various levels of first principles calculations. The trans isomer of NMF in aqueous solution is enthalpically favored relative to the cis (deltaH(o) = -5.79 +/- 0.18 kJ mol(-1)) with entropy differences at 298 K (298 x deltaS(o) = -0.23 +/- 0.17 kJ mol(-1)) playing a minor role. The experimental value of the enthalpy difference strongly decreases (deltaH(o) = -1.72 +/- 0.06 kJ mol(-1)), and the contribution of entropy at 298 K (298 x deltaS(o) = -1.87 +/- 0.06 kJ mol(-1)) increases in the case of the sterically hindered tert-butylformamide. The trans isomer of NMF in CDCl3 solution is enthalpically favored relative to the cis (deltaH(o) = -3.71 +/- 0.17 kJ mol(-1)) with entropy differences at 298 K (298 x deltaS(o) = 1.02 +/- 0.19 kJ mol(-1)) playing a minor role. In the sterically hindered tert-butylformamide, the trans isomer is enthalpically disfavored (deltaH(o) = 1.60 +/- 0.09 kJ mol(-1)) but is entropically favored (298 x deltaS(o) = 1.71 +/- 0.10 kJ mol(-1)). The results are compared with literature data of model peptides. It is concluded that, in amide bonds at 298 K and in the absence of strongly stabilizing sequence-specific inter-residue interactions involving side chains, the free energy difference of the cis/trans isomers and both the enthalpy and entropy contributions are strongly dependent on the N-alkyl substitution and the solvent. The significant decreasing enthalpic benefit of the trans isomer in CDCl3 compared to that in H2O, in the case of NMF and TBF, is partially offset by an adverse entropy contribution. This is in agreement with the general phenomenon of enthalpy versus entropy compensation. B3LY/6-311++G** and MP2/6-311++G** quantum chemical calculations confirm the stability orders of isomers and the deltaG decrease in going from water to CHCl3 as solvent. However, the absolute calculated values, especially for TBF, deviate significantly from the experimental values. Consideration of the solvent effects via the PCM approach on NMF x H2O and TBF x H2O supermolecules improves the agreement with the experimental results for TBF isomers, but not for NMF.     

Rhodium and platinum complexes as catalysts for the polymerization of phenylacetylene

In polymerization reactions of phenylacetylene three different types of polyphenylacetylene (PPA) were prepared by using Rh and Pt complexes as catalysts in different reaction conditions. Type I PPA is obtained with [Rh (COD) Chel] PF₆ complexes (COD = cis,cis-cycloocta 1,5-diene; chel = 2,2′-bipyridine, 1,10-phenanthroline, 2,9-dimethyl-1,10-phenanthroline, 5,6-dimethyl-1,10-phenanthroline, 3,4,7,8-tetramethyl-1,10-phenanthroline) in bulk, benzene methanol, while type II PPA is obtained with the same catalysts in p-dioxane and type III PPA in the presence of [Pt (? C?CPh)₂(PPh₃)₂] in bulk. Type I, II, and III PPA exhibit different IR and ¹H-NMR spectra, which have been compared with literature data. Correlations proposed by different Authors between spectral properties of PPA and chain structures are also discussed.     

"Exact" surface free energies of iron surfaces using a modified embedded atom method potential and lambda integration

Previously a new universal lambda-integration path and associated methodology was developed for the calculation of "exact" surface and interfacial free energies of solids. Such a method is in principle applicable to any intermolecular potential function, including those based on ab initio methods, but in previous work the method was only tested using a relatively simple embedded atom method iron potential. In this present work we apply the new methodology to the more sophisticated and more accurate modified embedded atom method (MEAM) iron potential, where application of other free- energy methods would be extremely difficult due to the complex many-body nature of the potential. We demonstrate that the new technique simplifies the process of obtaining "exact" surface free energies by calculating the complete set of these properties for the low index surface faces of bcc and fcc solid iron structures. By combining these data with further calculations of liquid surface tensions we obtain the first complete set of exact surface free energies for the solid and liquid phases of a realistic MEAM model system. We compare these predictions to various experimental and theoretical results.     

Recovery of thermal and mechanical properties after thermal treatment in a polyester-based polyurethane

Solution casted films of segmented polyurethanes based on poly (ethylene adipate) glycol, 4,4diphenylmethanediisocyanate, and 1,4 butanediol were studied by thermal-mechanical methods including differential scanning calorimetry and mechanical hysteresis. Data demonstrate that, following thermal treatment at 70 °C for 15 min, these polymers show time-dependent thermal and mechanical properties. In fact, because 70 °C is a temperature greater than the melting point of soft segments (about 42 °C), the soft-segment crystals are melted and their crystallization is time dependent. The results are explained in terms of phase separation. In particular, the sample with better phase separation has a faster and larger recovery.     

Polyoxometalate Derivatives with Multiple Organic Groups. 2. Synthesis and Structures of Tris(organotin) alpha, beta-Keggin Tungstosilicates

Eight tris(organotin)-substituted Keggin tungstosilicate heteropolyanions have been synthesized and characterized by elemental analysis, infrared and M?ssbauer spectroscopy, multinuclear NMR, and X-ray crystallography. The new anions contain alpha- or beta-SiW(9)O(34)(10)(-) moieties and are of two structural types, [(RSn)(3)(SiW(9)O(37))](7)(-) (R, isomer: Ph, alpha-, 1; n-Bu, alpha-, 2; Ph, beta-, 3; n-Bu, beta-, 4) and [(RSnOH)(3)(SiW(9)O(34))(2)](14)(-) (Ph, alpha-, 5; n-Bu, alpha-, 6; Ph, beta-, 7; n-Bu, beta-, 8). Crystals of Cs(4)H(3)[(PhSn)(3)(SiW(9)O(37))].8H(2)O (anion 3) are monoclinic, space group C2/c, with lattice constants a = 48.91(2) ?, b = 12.111(3) ?, c = 20.334(9) ?, beta = 102.30 degrees, and Z = 8. The anion has nominal C(3)(v)() symmetry and has a structure with three corner-shared WO(6) octahedra of the beta-Keggin anion replaced by three PhSnO(5) groups. Crystals of Cs(9)H(5)[(BuSnOH)(3)(SiW(9)O(34))(2)].36H(2)O (anion 6) are tetragonal, space group P&fourmacr;2(1)m, with lattice constants a = b = 29.005(4) ?, c = 13.412(4) ?, and Z = 4. The anion has the anticipated D(3)(h)() symmetry and contains three BuSnOH groups sandwiched between A,alpha-SiW(9)O(34)(10)(-) anions.     

Energetic and topological analyses of the oxidation reaction between Mo(n) (n = 1, 2) and N2O

The interaction between molybdenum, atom, and dimer, with nitrous oxide has been investigated using density functional theory. The analysis of the potential energy surfaces for both reactions has revealed that a single molybdenum atom can activate the N--O bond of N2O requiring a small activation energy. However, the presence of several intersystem crossings between three different spin states, namely, septet, quintet and triplet states, seems to be the major constraint to the Mo + N2O reaction. Contrarily, the low-lying excited states (triplet and quintet) do not participate in the reaction between the molybdenum dimer and N2O. The latter reaction fully evolves on the singlet spin surface. Three different regions have been distinguished along the pathway: formation of an adduct complex, formation of an inserted compound, and the N2 detachment. The connection between the two first regions has been characterized by the formation of a special complex in which the N--O bond is so weakened that it could be considered as a first step in the insertion process. It has been shown that the topological changes along the pathways provide a clear explanation for the geometrical changes that occur along the reaction pathway. In summary, the detachment of the N2 molecule is found to be kinetically an effective process for both reactions, owing to the high exothermicity and consequently to the high internal energy of the insertion intermediates. However, in the case of Mo atom, the reaction should be a slow process due to the presence of spin-forbidden transitions. These results fully agree with previous experimental works.     

Easy Chemo-Enzymatic Synthesis of Human Milk Trisaccharides from a Common Selectively Protected Lactose Building Block

ABSTRACT

Three glycosyllactosides, contained in the neutral fraction of human milk oligosaccharides, were synthesised in a simple and straightforward manner through a sequence based on a chemo-enzymatic approach. Lipase catalysed regioselective 6'-O-acylation of benzyl β-lactoside, followed by the introduction of an isopropylidene group and acetylation afforded, depending on the reaction conditions, compounds 4a and 4b, which allow selective access to positions 3, 3' and 6'. Glycosylation with proper donors gave trisaccharides 6, 9 and 12.     

Epoxide Opening versus Silica Condensation during Sol–Gel Hybrid Biomaterial Synthesis

Hybrid organic–inorganic solids represent an important class of engineering materials, usually prepared by sol–gel processes by cross‐reaction between organic and inorganic precursors. The choice of the two components and control of the reaction conditions (especially pH value) allow the synthesis of hybrid materials with novel properties and functionalities. 3‐Glycidoxypropyltrimethoxysilane (GPTMS) is one of the most commonly used organic silanes for hybrid‐material fabrication. Herein, the reactivity of GPTMS in water at different pH values (pH 2–11) was deeply investigated for the first time by solution‐state multinuclear NMR spectroscopic and mass spectrometric analysis. The extent of the different and competing reactions that take place as a function of the pH value was elucidated. The NMR spectroscopic and mass spectrometric data clearly indicate that the pH value determines the kinetics of epoxide hydrolysis versus silicon condensation. Under slighly acidic conditions, the epoxy‐ring hydrolysis is kinetically more favourable than the formation of the silica network. In contrast, under basic conditions, silicon condensation is the main reaction that takes place. Full characterisation of the formed intermediates was carried out by using NMR spectroscopic and mass spectrometric analysis. These results indicate that strict control of the pH values allows tuning of the reactivity of the organic and inorganic moities, thus laying the foundations for the design and synthesis of sol–gel hybrid biomaterials with tuneable properties.     

Fingerprinting pre-historical symbolic artefacts by a non-destructive methodological approach

Journal of Radioanalytical and Nuclear Chemistry - A contribution to the discussion about Vila Nova de São Pedro (VNSP) as a production centre of symbolic lithic artefacts, the origin of raw...