Synthesis,Spectroscopy, Semi‐empirical and Biological Activities of Organotin(IV) Complexes with o‐Isopropyl Carbonodithioic Acid

New organotin(IV) complexes have been synthesized by treating potassium o‐isopropyl carbonodithioate with R₂SnCl₂/R₃SnCl in 1 : 2/1 : 1 M/L ratio. All complexes have been characterized by IR and NMR (¹H, ¹³C) spectroscopy. IR results shows that ligand acts as bidentate which is also confirmed by semi‐empirical study. NMR data reveals four coordinated geometry in solution. Computed positive heat of formation shows that complex 5 is thermodynamically unstable. UV/visible spectroscopy was used to assess the mode of interaction and binding of the complexes with DNA which shows that complex 5 exhibits higher binding constant as compared to complex 3 . In protein kinase inhibition assay, compound 3 was found most active, while other biological activities shows that triorganotin(IV) complexes are biologically more active as compared to diorganotin(IV) complexes.     

Facile LC‐UV methods for simultaneous monitoring of ciprofloxacin and rosuvastatin in API,formulations and human serum

An efficient, selective and cost‐effective liquid chromatographic assay was developed and validated for the simultaneous quantification of ciprofloxacin and rosuvastatin in Active Pharmaceutical Ingredients (API), pharmaceutical formulations and in human serum. The chromatographic system consisted of mobile phase methanol–water, 90:10 v/v at pH 3.0 adjusted with o‐phosphoric acid, pumped at 1.0 mL/min through a prepacked Purospher Star C18 (5 µm, 25 × 0.46 cm) column and effluent was monitored at the isosbestic point (255 nm) as well as at the λ_max of individual drugs (243 and 271 nm). The method was validated over a linear concentration range of 0.25–15 µg/mL for ciprofloxacin and 0.33–20 µg/mL for rosuvastatin (r² ≥ 0.999). The ranges of reliable response (limits of detection and quantitation) for ciprofloxacin were 3–15 and 9–45 ng/mL and 17–29 and 52–88 ng/mL, respectively, for rosuvastatin in all API, pharmaceutical formulations and human serum. Analytical recovery from human serum was >98% and relative standard deviation (RSD) was <2. The accuracies were 97.13–102.55 and 97.41–101.31% and precisions in RSD were 0.04–1.90 and 0.02–1.23% for ciprofloxacin and rosuvastatin, respectively. No matrix interferences, ion suppression/enhancement and carry‐over were detected. The total assay run time was less than 5 min. In another study, for optimum performance the detector was programmed for multiwavelength scanning at the absorption maxima of each component. Consequently, the linearity range was improved and limit of detection and quantitation values were down to 1–4 and 4–12 ng/mL for ciprofloxacin and 3–5 and 9–15 ng/mL for rosuvastatin, respectively. The validation parameters fitted ICH guidelines through the isosbestic and individual λ_max approach. The small sample volume and simplicity of preparation make this method suitable for use in human serum samples, pharmaceutical formulations, quality control, drug–drug interaction studies, clinical laboratories, drug research centers and forensic medical centers. Copyright © 2014 John Wiley & Sons, Ltd.     

Phosphonate‐Modified UiO‐66 Brønsted Acid Catalyst and Its Use in Dehydra‐Decyclization of 2‐Methyltetrahydrofuran to Pentadienes

Phosphorus‐modified all‐silica zeolites exhibit activity and selectivity in certain Brønsted acid catalyzed reactions for biomass conversion. In an effort to achieve similar performance with catalysts having well‐defined sites, we report the incorporation of Brønsted acidity to metal–organic frameworks with the UiO‐66 topology, achieved by attaching phosphonic acid to the 1,4‐benzenedicarboxylate ligand and using it to form UiO‐66‐PO₃H₂ by post‐synthesis modification. Characterization reveals that UiO‐66‐PO₃H₂ retains stability similar to UiO‐66, and exhibits weak Brønsted acidity, as demonstrated by titrations, alcohol dehydration, and dehydra‐decyclization of 2‐methyltetrahydrofuran (2‐MTHF). For the later reaction, the reported catalyst exhibits site‐time yields and selectivity approaching that of phosphoric acid on all‐silica zeolites. Using solid‐state NMR and deprotonation energy calculations, the chemical environments of P and the corresponding acidities are determined.     

The synthesis of silica-supported chiral BINOL: Application in Ti-catalyzed asymmetric addition of diethylzinc to aldehydes

Chiral BINOL was covalently anchored on two different pore sized mesoporous silica (SBA-15 (7.5 nm) and MCF (14 nm)). These heterogenized ligands were used in Ti-catalyzed asymmetric addition of diethylzinc to aldehydes. High catalytic activity with excellent enantioselectivity (up to 94% ee) for secondary alcohols was achieved using MCF supported chiral BINOL under heterogeneous reaction conditions. Good to excellent enantioselectivity (ee, 68–91%) was also achieved with various small to bulkier aldehydes. The MCF supported catalyst was reused in multiple catalytic runs without loss of enantioselectivity.     

Dosimetric characteristics of aqueous solution of crystal violet for applications in food irradiation

Aqueous solution of crystal violet has been evaluated spectrophotometrically as a gamma-ray chemical dosimeter. The response of the chemical dosimetric system has also been investigated under different environmental conditions, such as light and temperature. In the present study the response has been measured at two wavelengths; 588 nm (λ_max of the irradiated solution) and 500 nm. The response of the crystal violet dosimeter was linear in the dose range of 50–550 Gy at pH 5.6 when absorption measurements were made at 588 and 500 nm. The response of the crystal violet dosimeter during post-irradiation storage at room temperature in dark showed slight decrease in absorbance at 588 and 510 nm but the response was almost stable at 460 nm. For higher doses, the change in the response was greater as compared to the low doses. Post-irradiation stability during diffused sunlight showed significant decrease in the response for higher dose at 588 and 510 nm and slower decrease in the response for lower dose at the above mentioned wavelengths. However the response was almost stable up to 97 days at 460 nm for higher and lower doses. At 4 °C, the decrease in the absorbance was slower at 588 and 510 nm while the response was almost constant at 460 nm. At higher temperatures, such as 40 °C, the decrease in the absorbance was greater at 588 and 510 nm while at 460 nm the absorbance was almost constant for about 3 months.     

Adsorption of acid yellow dye on flakes of chitosan prepared from fishery wastes

Chitosan flakes, extracted from prawns and labeo rohita scales, with high adsorption capacity were prepared after chemical treatment and were used to remove acid yellow dye from water. The results showed that adsorption capacity is dependent on pH, initial concentration of dye, BET, Langmuir surface area and pore volume of the adsorbent. In acidic conditions, the polymer amino groups were protonated (positively charged polymer chain), which showed attraction with negative ions of anionic dye. Chitosan from prawns scales showed higher dye adsorption under the same experimental conditions. Adsorption isotherms were developed and equilibrium data fitted well to Langmuir and Freundlich isotherm models.     

Fe(Cp)2PF6: An efficient catalyst for cyanosilylation of carbonyl compounds under solvent free condition

An efficient method for the addition of trimethylsilyl cyanide (TMSCN) to various aldehydes and ketones has been described using Fe(Cp)₂PF₆ (2.5 mol%) as a catalyst under solvent free condition. Excellent yields of trimethylsilylether of cyanohydrin up to (94%) was achieved within 10 min.     

Synthesis of O,O Ethane Bridged Bis-copper(II) Macrocycles. Selective Enzyme Model for Catecholase Activity

New mononuclear and dinuclear complexes [3-hydroxyethyl-1,3,5,8,11pentaazacyclotridecane]copper(II) (1)/nickel(II) (2) perchlorate and O,O ethane bridged bis-copper(II) (3)/nickel(II) (4) macrocycles have been synthesized and characterized by various spectroscopic techniques, viz. i.r., n.m.r., e.p.r., u.v.–vis. and conductance measurements. Spectral data and conductance measurements reveal that all the complexes are consistent with square-planar geometry and are ionic in nature. The catalytic activity of the dinuclear Cu(II) complex (3) in the presence of pyrocatechol was determined spectrometrically by monitoring the increase of the o-benzoquinone characteristic absorption band at 25,000 cm⁻¹ with respect to time in DMF saturated with molecular oxygen. The kinetic parameters V_max (2.8×10⁻³ M s⁻¹) and K_M (1.4×10⁻³ mm) have been determined by Michaelis–Menten method. Electrochemistry of the dinuclear Cu(II) complex has been studied in the presence of molecular oxygen with pyrocatechol and without pyrocatechol at a scan rate of 0.1 V s⁻¹ by cyclic voltammetry. On addition of pyrocatechol, complex shows a shift in E_pc, E_pa and E_1/2 values indicating the oxidation of substrate (pyrocatechol).     

Integrated System Pharmacology Approaches to Elucidate Multi-Target Mechanism of Solanum surattense against Hepatocellular Carcinoma

Hepatocellular carcinoma (HCC) is one of the most common malignant liver tumors with high mortality. Chronic hepatitis B and C viruses, aflatoxins, and alcohol are among the most common causes of hepatocellular carcinoma. The limited reported data and multiple spectra of pathophysiological mechanisms of HCC make it a challenging task and a serious economic burden in health care management. Solanum surattense (S. surattense) is the herbal plant used in many regions of Asia to treat many disorders including various types of cancer. Previous in vitro studies revealed the medicinal importance of S. surattense against hepatocellular carcinoma. However, the exact molecular mechanism of S. surattense against HCC still remains unclear. In vitro and in silico experiments were performed to find the molecular mechanism of S. surattense against HCC. In this study, the network pharmacology approach was used, through which multi-targeted mechanisms of S. surattense were explored against HCC. Active ingredients and potential targets of S. surattense found in HCC were figured out. Furthermore, the molecular docking technique was employed for the validation of the successful activity of bioactive constituents against potential genes of HCC. The present study investigated the active “constituent–target–pathway” networks and determined the tumor necrosis factor (TNF), epidermal growth factor receptor (EGFR), mammalian target of rapamycin (mTOR), Bcl-2-like protein 1(BCL2L1), estrogen receptor (ER), GTPase HRas, hypoxia-inducible factor 1-alpha (HIF1-α), Harvey Rat sarcoma virus, also known as transforming protein p21 (HRAS), and AKT Serine/Threonine Kinase 1 (AKT1), and found that the genes were influenced by active ingredients of S. surattense. In vitro analysis was also performed to check the anti-cancerous activity of S. surattense on human liver cells. The result showed that S. surattense appeared to act on HCC via modulating different molecular functions, many biological processes, and potential targets implicated in 11 different pathways. Furthermore, molecular docking was employed to validate the successful activity of the active compounds against potential targets. The results showed that quercetin was successfully docked to inhibit the potential targets of HCC. This study indicates that active constituents of S. surattense and their therapeutic targets are responsible for their pharmacological activities and possible molecular mechanisms for treating HCC. Lastly, it is concluded that active compounds of S. surattense act on potential genes along with their influencing pathways to give a network analysis in system pharmacology, which has a vital role in the development and utilization of drugs. The current study lays a framework for further experimental research and widens the clinical usage of S. surattense.     

Impact of Internal Heat Source on Mixed Convective Transverse Transport of Viscoplastic Material under Viscosity Variation

This communication addresses the impact of heat source/sink along with mixed convection on oblique flow of Casson fluid having variable viscosity. Similarity analysis has been utilized to model governing equations, which are simplified to set of nonlinear differential equations. Computational procedure of shooting algorithm along with 4th order Range-Kutta-Fehlberg scheme is opted to attain the velocity and temperature distributions. Impact of imperative parameters on Casson fluid flow, temperature, significant physical quantities such as skin friction, local heat flux and streamlines are displayed via graphs.