High temperature characteristics of ZnO-based MOS-FETs with a photochemical vapor deposition SiO2 gate dielectric

The authors report the fabrication of ZnO-based metal-oxide-semiconductor field effect transistors (MOSFETs) with a high quality SiO₂ gate dielectric by photochemical vapor deposition (photo-CVD) on a sapphire substrate. Compared with ZnO-based metal-semiconductor FETs (MESFETs), it was found that the gate leakage current was decreased to more than two orders of magnitude by inserting the photo-CVD SiO₂ gate dielectric between ZnO and gate metal. Besides, it was also found that the fabricated ZnO MOSFETs can achieve normal operation of FET, even operated at 150 °C. This could be attributed to the high quality of photo-CVD SiO₂ layer. With a 2 μm gate length, the saturated I_ds and maximum transconductance (G_m) were 61.1 mA/mm and 10.2 mS/mm for ZnO-based MOSFETs measured at room temperature, while 45.7 mA/mm and 7.67 mS/mm for that measured at 150 °C, respectively.     

Nanosecond dynamics of ferroelectric/dielectric superlattices

The nanosecond response of a PbTiO(3)/SrTiO(3) ferroelectric/dielectric superlattice to applied electric fields is closely linked to the dynamics of striped domains of the remnant polarization. The intensity of domain satellite reflections observed with time-resolved x-ray microdiffraction decays in 5-100 ns depending on the magnitude of the electric field. The piezoelectric response of the superlattice within stripe domains is strongly suppressed due to electromechanical clamping between adjacent regions of opposite polarization. Regions of the superlattice that have been switched into a uniform polarization state by the applied electric field, however, exhibit piezoelectricity during the course of the switching process. We propose a switching model different from previous models of the switching of superlattices, based instead on a spatially heterogeneous transformation between striped and uniform polarization states.     

Higher-order space-charge field effects on the self-deflection of two-photon bright photovoltaic spatial solitons

We investigate numerically the effects of higher-order space-charge field on the self-deflection of bright photovoltaic spatial solitons in two-photon photovoltaic photorefractive crystals under steady-state conditions. The expression for an induced space-charge electric field, including higher-order space-charge field terms is obtained. The dynamical evolution equation is built in which the effects that arise from these higher-order terms are considered. Numerical results indicate that bright photovoltaic solitons can bend towards both the same direction as the crystal's c-axis and the opposite direction, respectively. Specifically, self-deflection cannot occur for bright photovoltaic solitons if the strength of the photovoltaic field and the intensity of the input beam are appropriately selected. Relevant examples are provided.     

金属卟啉配合物在无机层状框架中的插入组装及光学性能

利用插入化学法,将金属卟啉配合物——四苯基卟啉合银(Ⅱ),组装到改性磷酸锆(十二烷基三甲基铵磷酸锆)无机层状物中.配合物与改性磷酸锆作用后,层状框架的层间距由3.00nm调整到1.96 nm,卟啉的Soret吸收带和发射光谱都出现明显的位移,其中最大吸收由421 nm红移到429 nm,最大发射由651 nm红移到65...     

第一性原理研究KDP晶体中Ba取代K点缺陷

 用基于第一性原理的CASTEP模拟了Ba替代K缺陷前后形成的电子结构和能态密度。发现晶体能带宽度降至6.4 eV左右,对应着380 nm的双光子吸收,这一结果可以解释掺Ba晶体在紫外波段的吸收现象。Ba替代K点缺陷仅使其周围的晶格及电子结构发生轻微畸变,对晶体整体结构影响不大。     

计算机控制光学表面成形中大规模驻留时间求解

采用基于稀疏矩阵的大规模非负最小二乘法,对大口径、微浮雕结构光学元件加工中的驻留时间进行了分析与求解,并对该算法开展了正则化研究。仿真结果表明:与传统非负最小二乘法相比,基于稀疏矩阵的大规模非负最小二乘法精度高、效率快。采用该算法仿真加工平均振幅为1.177 6倍波长的大口径、微浮雕结构光学元件,误差面形均方根收敛至0.067倍波长。     

含超导材料Thue-Morse序列一维光子晶体传输特性研究

超导光子晶体是一类重要的带隙可调谐的光子晶体.利用传输矩阵法研究了含超导材料的Thue -Morse序列准周期结构—维光子晶体在可见光波段的传输特性.数值结果表明在正入射时,光子带隙宽度和位置基本不随序列项数的增加而改变;准周期超导光子晶体的传输特性可以通过改变传统电介质材料的结构参数和环境温度等来进行调节.     

Development of optical fiber-based respiration sensor for noninvasive respiratory monitoring

In this study, two types of nasal-cavity-attached fiber-optic respiration sensors have been fabricated for noninvasive respiratory monitoring. One is a silver halide optical-fiber-based respiration sensor that can measure the variations of infrared radiation generated by the respiratory airflow from a nasal cavity. The other is a thermochromic-pigment-based fiber-optic respiration sensor that can measure the intensity of reflected light which changes owing to color variations of the temperature-sensing film according to the temperature difference between inspiratory and expiratory air. We have demonstrated the similarities of the respiratory signals using the fiber-optic respiration sensors and the temperature transducer of the BIOPAC? system. In addition, we verified that respiratory signals without the deterioration of the MR image can be obtained using the fiber-optic respiration sensors. It is anticipated that the proposed noninvasive fiberoptic respiration sensors will be highly effective for respiratory monitoring of a patient during MRI procedures.     

High-speed scanning fiber-optic heterodyne interferometer using a micro-electro-mechanical system mirror and an f-theta lens

This paper describes a novel fiber-coupled heterodyne interferometer using a micro-electro-mechanical system (MEMS) mirror and an f-theta lens. In this interferometer system, the cross-polarized laser beams operating at 2 μm with the frequency difference of 100 kHz are introduced by means of the two acousto-optic modulators (AOM). The sample with diameter of 300 mm is uniformly scanned by the 1 mm laser beam with the help of the combined optical scanning configuration, a MEMS mirror and an f-theta lens. The output intermediate signal from the two channels, reference channel and the measurement channel, are processed in the 12 bit analog-to-digital (A/D) process system. Details of our interferometer scheme are discussed.     

Evaluation of the dosimetric characteristics of a radiophotoluminescent glass dosimeter for high-energy photon and electron beams in the field of radiotherapy

We aimed to evaluate the suitability of a glass dosimeter (GD) for high-energy photon and electron beams in experimental and clinical use, especially for radiation therapy. We examined the expanded dosimetric characteristics of GDs including dose linearity up to 500 Gy, uniformity among GD lots and for individual GDs, the angular dependence, and energy dependence of 4 therapeutic x-ray qualities. In addition, we measured the dosimetric features (dose linearity, uniformity, angular dependence, and energy dependence) of the GD for electron beams of 10 different electron energy qualities. All measurements with the exception of dose linearity for photon beam were performed in a water phantom. For high-energy photon beams, dose linearity has a linear relationship for a dose ranging from 1 to 500 Gy with the coefficient of determination; R² of 0.998. The uniformity of each GD of dose measurements was within ±0.5% for four GD lots and within ±1.2% for 80 GDs. In terms of the effects of photon beam angle, lower absorbed doses of within 1.0% were observed between 60° and 105° than at 90°. The GD energy dependence of 4 photon beam energy qualities was within ±2.0%. On the other hand, the result of the dose linearity for high-energy electron beams showed well fitted regression line with the coefficient of determination; R² of 0.999 between 6 and 20 MeV. The uniformity of GDs exposed to the nominal electron energies 6, 9, 12, 16, and 20 MeV was ±1.2%. In terms of the angular dependence to electron beams, absorbed doses were within 2.0% between 60° and 105° than at 90°. In evaluation of the energy dependence of the GD at nominal electron energies between 5 and 20 MeV, we obtained responses between 1.1% and 3.5% lower than that for a cobalt-60 beam. Our results show that GDs can be used as a detector for determining doses when a high-energy photon beam is used, and that it also has considerable potential for dose measurement of high-energy electron beam.