漂移管工作温度对离子迁移率谱的影响

离子迁移率、反应物离子的种类和产量与漂移管工作温度有很大的关系。本研究在不同温度下进行了离子迁移率实验,结果表明,离子迁移率随温度的升高而增大,而提高工作温度可以减少水分子对产物离子的影响,有利于改善系统检测的分辨率;选择合适漂移管工作温度,能有效地增加反应物离子的产量,从而提高系统检测的灵敏度和选择性。     

A Novel 3D Na(I) Coordination Polymer Constructed by 3,5-Bis(4'-Carboxy-Phenyl)-1,2,4-Triazole: Synthesis,Crystal Structure,and Photocatalytic Property

Crystallography Reports - A novel 3D metal coordination polymer, {[Na4(µ2-H2O)(DMF)2(BCT)2]?DMF}n (I) (DMF = N,N-dimethylformamide, H2BCT =...     

Theoretical study on the catalytic properties of single-atom catalyst stabilised on silicon-doped graphene sheets

ABSTRACT

The stable configurations, electronic structures and catalytic activities of single-atom metal catalyst anchored silicon-doped graphene sheets (3Si-graphene-M, M?=?Ni and Pd) are investigated by using density functional theory calculations. Firstly, the adsorption stability and electronic property of different gas reactants (O₂, CO, 2CO, CO/O₂) on 3Si-graphene-M substrates are comparably analysed. It is found that the coadsorption of O₂/CO or 2CO molecules is more stable than that of the isolated O₂ or CO molecule. Meanwhile, the adsorbed species on 3Si-graphene-Ni sheet are more stable than those on the 3Si-graphene-Pd sheet. Secondly, the possible CO oxidation reactions on the 3Si-graphene-M are investigated through Eley–Rideal (ER), Langmuir–Hinshelwood (LH) and new termolecular Eley–Rideal (TER) mechanisms. Compared with the LH and TER mechanisms, the interaction between 2CO and O₂ molecules (O₂?+?CO → CO₃, CO₃?+?CO → 2CO₂) through ER reactions (< 0.2?eV) are an energetically more favourable. These results provide important reference for understanding the catalytic mechanism for CO oxidation on graphene-based catalyst.     

Porphyrin-like porous nanomaterials as drug delivery systems for ibuprofen drug

In recent years, nanomaterial-based drug delivery carriers have become some of the most attractive to be studied. The purpose of this study is to investigate the interaction of C60 fullerene, carbon nanotube and graphene having porphyrin-like FeN4 clusters with a non-steroidal anti-inflammatory drug (ibuprofen) by means of the density functional theory. Results showed that the graphene with FeN4 clusters could remarkably increase the tendency of graphene for adsorption of ibuprofen drug. Also, our ultraviolet–visible results show that the electronic spectra of the complexes exhibit a blue shift toward lower wavelengths (higher energies). It was found that Ibp/FeN4-graphene had high chemical reactivity, which was important for binding of the drug onto the target site. In order to go further and gain insight into the binding features of considered systems with ibuprofen drug, the Atoms in Molecules analysis was performed. Our results determine the electrostatic features of the Ibp/FeN4-graphene bonding. Consequently, the results demonstrated that the FeN4-graphene could be used as potential carriers for the delivery of ibuprofen drug.     

Numerical approach for the evolution of spin-boson systems and its application to the Buck–Sukumar model

We study the evolution properties of spin-boson systems by a systematic numerical iteration approach, which performs well in the whole coupling regime. This approach evaluates a set of coefficients in the formal expression of the time-dependent Schr?dinger equation by expanding the initial state in Fock space. This set of coefficients is unique for the spin-boson Hamiltonian studied, allowing one to calculate the time evolution from different initial states. To complement our numerical calculations, we apply the method to the Buck–Sukumar model. We find that when the ground-state energy of the model is unbounded and no ground state exists in a certain parameter space, the time evolution of the physical quantities is naturally unstable.     

改变激发环境调控Ho3+离子的上转换发光特性

稀土掺杂上转换发光材料的发光特性不仅依赖于基质材料本身,而且与其激发条件密切相关.本文主要是以Ho^3+离子为研究对象,在NaYF4和LiYF4这两种不同的基质中,研究其在不同激发条件下的上转换发光特性.通过共聚焦显微光谱测试系统,对比Ho^3+离子在NaYF4和LiYF4微米晶体中的发光特性.实验结果发现:Ho^3+离子在这两种不同基质中均展现出较强的荧光发射.然而,当激发功率增加时,在单颗粒个LiYF4微米晶体中,当激发功率增加时,Ho^3+离子则发射出较强绿光及微弱的红光,红绿比变化并不明显,其蓝光发射强度也相对较弱.当激发这两种微米粉末晶体时,结果发现:Ho^3+离子均发射较强的绿光发射并伴有微弱红光发射,两种晶体中的发射特性极其相似.由此可见,在常规测试条件下,一些特殊发光现象是很难被观测到的.同时,通过对其光谱特性的分析,对Ho^3+离子的发光机理进行了研究.     

Determination of structure parameters in strong-field ionization models of atoms

The Ammosov–Delone–Krainov (ADK) and Perelomov–Popov–Terent’ev (PPT) ionization models were widely used in strong-field physics and attosecond science due to their many attractive advantages such as simpler analytical formula, less computational demands, and satisfied accuracy of ionization rate. Based on the density-functional theory, we systematically determine accurate structure parameters of 25 atoms, 24 positive ions and 13 negative ions and tabulate for future applications. The wave function with correct asymptotic behavior is obtained by solving the time-independent Schrödinger equation with B-spline basis sets and the accurate structure parameters are extracted from this wave function in the asymptotic region. The accuracies of structure parameters are carefully examined by comparing the ionization probabilities (or yields) calculated by PPT and ADK models with those of solving the three-dimensional time-dependent Schrödinger equation and the experimental data.     

1200 V碳化硅功率MOSFET低温特性的实验表征及分析

碳化硅功率MOSFET是宽禁带功率半导体器件的典型代表,具有优异的电气性能。基于低温环境下的应用需求,研究了1200 V碳化硅功率MOSFET在77.7 K至300 K温区的静/动态特性,定性分析了温度对碳化硅功率MOSFET性能的影响。实验结果显示,温度从300 K降低至77.7 K时,阈值电压上升177.24%,漏-源极击穿电压降低32.99%,栅极泄漏电流降低82.51%,导通电阻升高1142.28%,零栅压漏电流降低89.84%(300 K至125 K)。双脉冲测试显示,开通时间增大8.59%,关断时间降低16.86%,开关损耗增加48%。分析发现,碳化硅功率MOSFET较高的界面态密度和较差的沟道迁移率,是导致其在低温下性能劣化的主要原因。     

Second harmonic magnetoacoustic responses of magnetic nanoparticles in magnetoacoustic tomography with magnetic induction

Due to the unique magnetic, mechanical and thermal properties, magnetic nanoparticles(MNPs) have comprehensive applications as the contrast and therapeutic agents in biomedical imaging and magnetic hyperthermia. The linear and nonlinear magnetoacoustic responses determined by the magnetic properties of MNPs have attracted more and more attention in biomedical engineering. By considering the relaxation time of MNPs, we derive the formulae of second harmonic magnetoacoustic responses(2H-MARs) for a cylindrical MNP solution model based on the mechanical oscillations of MNPs in magnetoacoustic tomography with magnetic induction(MAT-MI). It is proved that only the second harmonic magnetoacoustic oscillations can be generated by MNPs under an alternating magnetic excitation. The acoustic pressure of the 2H-MAR is proportional to the square of the magnetic field intensity and exhibits a linear increase with the concentration of MNPs. Numerical simulations of the 2H-MAR are confirmed by the experimental measurements for various magnetic field intensities and solution concentrations using a laser vibrometer. The favorable results demonstrate the feasibility of the harmonic measurements without the fundamental interference of the electromagnetic excitation, and suggest a new harmonic imaging strategy of MAT-MI for MNPs with enhanced spatial resolution and improved signal-to-noise ratio in biomedical applications.     

A reconfigurable terahertz polarization converter based on metal–graphene hybrid metasurface

A metal-graphene hybrid metasurface polarization converter is designed in this Letter.The unit cell of the hybrid metasurface is composed of a butterfly-shaped structure whose branches are connected by multi-layer graphene sheets.The proposed device can be reconfigured from linear-to-circular polarization to cross-polarization by changing the Fermi energy of graphene.The simulation results show that for three-layer graphene,the device acts as a linear-to-circular polarization converter when EF=0 eV and switches to a cross-polarization converter when EF=0.5 eV.Compared with single-layer graphene,the device with three-layer graphene can maintain the cross-polarization conversion performance under low Fermi energy.Furthermore,two equivalent circuits in the x and y directions are developed to understand the working mechanism of the device.