Quantitative interrogation of protein co-aggregation using multi-color fluorogenic protein aggregation sensors

Co-aggregation of multiple pathogenic proteins is common in neurodegenerative diseases but deconvolution of such biochemical process is challenging. Herein, we developed a dual-color fluorogenic thermal shift assay to simultaneously report on the aggregation of two different proteins and quantitatively study their thermodynamic stability during co-aggregation. Expansion of spectral coverage was first achieved by developing multi-color fluorogenic protein aggregation sensors. Orthogonal detection was enabled by conjugating sensors of minimal fluorescence crosstalk to two different proteins via sortase-tag technology. Using this assay, we quantified shifts in melting temperatures in a heterozygous model protein system, revealing that the thermodynamic stability of wild-type proteins was significantly compromised by the mutant ones but not vice versa. We also examined how small molecule ligands selectively and differentially interfere with such interplay. Finally, we demonstrated these sensors are suited to visualize how different proteins exert influence on each other upon their co-aggregation in live cells.

A little leak will sink a great ship! We prepared a series of multi-color protein aggregation sensors and developed a dual-color thermal shift assay to simultaneously and quantitatively report on protein co-aggregation of two different proteins.     

Determination of zinc in marine/lacustrine sediments by graphite furnace atomic absorption spectrometry using Pd/Mg chemical modifier and slurry sampling

Effectiveness of Pd/Mg chemical modifier for the accurate direct determination of zinc in marine/lacustrine sediments by graphite furnace atomic absorption spectrometry (GF-AAS) using slurry samples was evaluated. A calibration curve prepared by aqueous zinc standard solution with addition of Pd/Mg chemical modifier is used to determine the zinc concentration in the sediment. The accuracy of the proposed method was confirmed using Certified Reference Materials, NMIJ CRM 7303-a (lacustrine sediment) from National Metrology Institute of Japan, National Institute of Advanced Industrial Science and Technology, Japan, and MESS-3 (marine sediment) and PACS-2 (marine sediment) from National Research Council, Canada. The analytical results obtained by employing Pd/Mg modifier are in good agreement with the certified values of all the reference sediment materials. Although for NRC MESS-3 an accurate determination of zinc is achieved even without the chemical modifier, the use of Pd/Mg chemical modifier is recommended as it leads to establishment of a reliable and accurate direct analytical method. One quantitative analysis takes less than 15 minutes after we obtain dried sediment samples, which is several tens of times faster than conventional analytical methods using acid digested sample solutions. The detection limits are 0.13?µg?g^?1 (213.9?nm) and 16?µg?g^?1 (307.6?nm), respectively, in sediment samples, when 40?mg of dried powdered samples are suspended in 20?mL of 0.1?mol?L^?1 nitric acid and a 10?µl portion of the slurry sample is measured. The precision of the proposed method is 8–15% (RSD).     

Notable shift of ultraviolet intensity on Sn-doped ZnO nanostructure fabricated by sol–gel method

Sn-doped ZnO (SZO) thin films are deposited by sol–gel dip-coating method with Sn content at 0 at.% and 1–15 at.% with an increment of 2 at.%. The structure and luminescence of the films are investigated. X-ray diffraction results indicate that all the SZO samples show preferential orientation along the (002) direction, and the scanning electron microscope exhibits that the surface morphology of the films change from nanoparticles to nanorods with increasing Sn concentration. X-ray photoelectron spectroscopy reveals that Sn exists as valence of +4 in the matrix. The photoluminescence peaks at 381 and 398 nm are observed in all the samples. The ratio of intensity of peak at 381 nm to that of peak at 398 nm differed markedly. The intensity of peak at 398 nm might be due to the response for the Sn atoms, while the intensity of peak at 381 nm is probably related to the quantum size effect.     

用于直接甲醇燃料电池的侧链型磺化聚芳醚酮/聚乙烯醇交联膜的制备与性能研究

以高磺化度的侧链型磺化聚芳醚酮(S-SPAEK)和聚乙烯醇(PVA)为原料,通过溶液共混的方法在120℃下制备了PVA含量不同的S-SPAEK/PVA交联膜.红外光谱图表明S-SPAEK聚合物中的磺酸基团与PVA中的羟基反应生成酯键而形成共价交联.通过对交联膜的性能测试发现PVA的引入明显降低了膜的甲醇渗透系数,改善了膜的溶胀性,提高了膜的保水能力.S-SPAEK/PVA(85/15)交联膜水的脱附系数从S-SPAEK的3.1×10-8 cm2/s降低到2.9×10-9 cm2/s.在25℃和60℃时S-SPAEK/PVA(85/15)交联膜的甲醇渗透系数分别为2.6×10-7cm2/s和3.9×10-7cm2/s,明显低于相同温度下的纯S-SPAEK膜的8.1×10-7cm2/s与14.5×10-7cm2/s,而其质子传导率虽然有所下降,但是在25℃和80℃时分别达到了0.055 S/cm和0.083 S/cm,能够满足直接甲醇燃料电池(DMFCs)对质子交换膜的要求,有望在DMFCs中得到应用.     

DFT/TDDFT investigation on bis-cyclometalated alkynylgold(III) complex: Comparison of absorption and emission properties

absorption and phosphorescent mechanism of three Au(III) complexes, Au(2,5-F2C6H3-C^C^C)(C≡C-C6H4N(C6H5)2 [Au25FPh], Au(3,5-F2C6H3-C^C^C)(C≡C-C6H4N(C6H5)2 [Au35FPh], and Au(3,5-F2C6H3-C^C^C)(C≡C-C6H4N(1H-indole)2 [Au35FID], are calculated and compared using density functional theory (DFT) and time-dependent DFT (TDDFT). The calculated results reveal that enlarging the center C^C^C ligand will result in the enhanced LMCT participation. This theoretical contribution allows design of new Au(Ⅲ) complexes with higher phosphorescence efficiency.     

Breath Figure Arrays: Unconventional Fabrications,Functionalizations, and Applications

A breath figure (BF) is the water droplet array that forms when moisture comes in contact with a cold substrate. This water droplet array has been widely utilized in the past two decades as a versatile soft template for the fabrication of polymeric porous films. Accordingly, the ordered pores on the polymer films formed with such a method are named a breath figure array (BFA).The BF templating technique is undergoing rapid development. Several unconventional BF processes have been established to prepare porous films with unique morphologies or primary materials, and various newly developed functionalization techniques have significantly improved the performance of polymeric films with BFA, leading to novel applications, including templates, biosensors, and separation membranes. These recent achievements will be described in this Minireview.     

Engineering the Mesopores of Fe3O4@Mesosilica Core–Shell Nanospheres through a Solvothermal Post‐Treatment Method

A solvothermal post‐treatment method was developed to synthesize Fe₃O₄@mesosilica core–shell nanospheres (CSNs) with a well‐preserved morphology, mesoporous structure, and tunable large pore diameters (2.5–17.6 nm) for the first time. N,N‐Dimethylhexadecylamine (DMHA), which was generated in situ during the heat‐treatment process, was mainly responsible for this pore‐size enlargement, as characterized by NMR spectroscopy. This pore‐size expansion can be strengthened with the aid of hexamethyldisilazane (HMDS), whilst the nature of the surface of the Fe₃O₄@mesosilica CSNs can be easily modified with trimethylsilyl groups during the pore‐size‐expansion process. The hydrophobicity of the Fe₃O₄@mesosilica CSNs increased for the enlarged mesopores and the adsorption capacity of these CSNs for benzene (up to 1.5 g g^?1) is the highest ever reported for Fe₃O₄@mesosilica CSNs. The resultant Fe₃O₄@mesosilica CSNs (pore size: 10 nm) showed a 3.6‐times higher adsorption capacity of lysozyme than those without the pore expansion (pore size: 2.5 nm), thus making them a good candidate for loading large molecules.     

Hydrosilylation Catalyzed with Rh(PPh3)3Cl/Ionic-Liquid–Functionalized SiO2

Ionic liquid–modified silica has been prepared by a “one-pot” reaction of activated silica, 3-chloropropyltriethoxysilane, and alkylimidazole or pyridine. It was found that the catalytic activity and β-adduct selectivity of the supported catalyst Rh(PPh₃)₃Cl/ionic-liquid–modified-SiO₂ for the hydrosilylation reaction of alkenes with triethoxysilane was significantly improved. Furthermore, the catalyst system could be recovered easily.