110kV冷绝缘高温超导电缆在故障电流下的温度计算与分析

研究了110kV冷绝缘高温超导电缆失超时,故障电流的分流情况,并以此为依据,建立了电缆在故障电流下失超时,温升与时间关系的计算模型;通过MATLAB对计算模型进行了求解,并对求解结果进行了分析;计算出了电缆在不同故障电流下,温度上升到不同值所需要的时间,进一步明确了故障电流的大小对电缆温升的影响。     

脉冲磁场处理对碳纳米管掺杂MgB2线材临界电流密度的影响

对碳纳米管(CNT)掺杂MgB₂超导体磁场处理后的行为进行了研究. 结果表明，CNT掺杂MgB₂超导体经5T脉冲磁场处理后临界电流密度J_c(H)在低磁场下提高了2—3倍，高场下提高一个数量级以上，扫描电镜结果显示CNT沿着处理磁场方向规则排列并且成为MgB₂基体的形核中心和高效的磁通钉扎中心. 关键词： 2')" href="#">MgB₂ 碳纳米管 脉冲磁场处理     

Can Millimeter Waves Generate Electroporation?

Analysis of the field distributions in a single biological cell under electromagnetic wave is given. With Debye approximation, the dielectric relaxation of each part of the cell, including the extracellular and cellular media, the cell membrane and the nuclear membrane, was taken into account. Making use of some typical parameters for a cell, the voltage across nuclear and cytoplasma membranes under electromagnetic waves are calculated up to millimeter wave frequency range. The calculated result indicates that it is unlikely to generate electroporation by present available millimeter wave sources.     

Syntheses, structures, and properties of novel molybdenum and tungsten complexes of fullerenes

The synthesis and characterization of several fullerene-based organometallic complexes containing Mo and W is reported.     

闪光照相中FXRMC和MCNP4B的散射比较研究

 散射问题是高能辐射成像研究中的一个重要问题,采用蒙特卡罗模拟来确定散射对提取客体信息的影响是一种重要的研究手段。简单介绍了FXRMC和MCNP4B程序的特点及其记录方式;在确保相同输入参数的条件下,针对不同的照相模型进行了对比计算。结果表明两个程序计算的散射照射量相对差别小于5%,说明这两个程序具有较高的符合程度。通过与实验结果的比较发现,这两个程序模拟的散射分布与实验结果基本一致,均可用于高能闪光照相的模拟研究。还给出了在散射检验方面的一些建议。     

液态泡沫结构及其稳定性

液态泡沫由大量气泡密集堆积在少量的表面活性剂溶液中形成, 是具有高度自组织结构的典型的软物质. 文章从泡沫物理学角度简要介绍了液态泡沫的结构特征和稳定性方面的研究.     

Measurement of the thickness profile of a transparent thin film deposited upon a pattern structure with an acousto-optic tunablefilter

A simultaneous volumetric thickness-profile measurement method based on an acousto-optic tunable filter for transparent film deposited upon pattern structures is described. The nondestructive thickness profilometer prevents the destruction of samples such as one encounters in using a scanning-electron microscope and provides good accuracy. The information on the volumetric thickness profile is obtained through least-squares fitting with a phase model, ?(model)(k)=2kh+? (k, d)+(offset) , which has three unknowns: surface profile h, thickness d, and an indeterminate initial phase offset. Accurate phase information in the spectral domain can be obtained by introduction of the concept of spectral carrier frequency. Experimental results for a metal patterned sample show that the volumetric thickness profile can be determined within an error range of ~10 nm .     

Ge_x Si_(1-x)/Si超晶格中纵声学声子的喇曼散射强度研究

本文用光弹理论,在全面考虑了超晶格中两种材料的声速,质量密度和光弹常数存在差别的基础上,计算了Ge_xSi_(1-x)/Si超晶格中折迭纵声学声子的喇曼散射强度,在高达50cm~(-1)的频率范围内,理论值和实验符合得很好。     

牙齿化石中由辐照产生的陷阱电子的热稳定性研究

本文对周口店北京猿人遗址的动物牙齿化石进行了辐照产生的陷阱捕获电子的热稳定性研究和釉质样品及牙质样品的热稳定性对比实验。得到釉质样品中g=2.0016 ESR峰的寿命为7.1×10⁶年(20℃)。说明了取该峰进行ESR年代测定的可信性和用釉质样品进行ESR年代测定的必要性。     

Breather molecules and localized interaction solutions in the (2+1)-dimensional BLMP equation

The (2+1)-dimensional Boiti–Leon–Manna–Pempinelli (BLMP) equation is an important integrable model. In this paper, we obtain the breather molecule, the breather-soliton molecule and some localized interaction solutions to the BLMP equation. In particular, by employing a compound method consisting of the velocity resonance, partial module resonance and degeneration of the breather techniques, we derive some interesting hybrid solutions mixed by a breather-soliton molecule/breather molecule and a lump, as well as a bell-shaped soliton and lump. Due to the lack of the long wave limit, it is the first time using the compound degeneration method to construct the hybrid solutions involving a lump. The dynamical behaviors and mathematical features of the solutions are analyzed theoretically and graphically. The method introduced can be effectively used to study the wave solutions of other nonlinear partial differential equations.