Measurement of small-signal and large-signal responses of packaged laser modules at high temperature

In this paper, the pulsed injection method is extended to measure the chip temperature of various packaged laser modules, such as the DFB laser modules, the FP laser modules, and the EML laser modules. An optimal injection condition is obtained by investigating the dependence of the lasing wavelength on the width and period of the injection pulse in a relatively wide temperature range. The small-signal frequency responses and large-signal performances of packaged laser modules at different chip temperature are measured. The adiabatic small-signal modulation characteristics of packaged LD are first extracted. In the large-signal measurement, the effects of chip temperature, bias current and driving signal on the performances of the laser modules are discussed. It has been found that the large-signal performances of the EML modules depend on the different red-shift speeds of the DFB and EAM sections as chip temperature varying, and the optimal characteristics may be achieved at higher temperature.     

Synthesis of TiO2–SiO2/polymer core–shell microspheres with a microphase‐inversion method

A novel microphase‐inversion method was proposed for the preparation of TiO₂–SiO₂/poly(methyl methacrylate) core–shell nanocomposite particles. The inorganic–polymer nanocomposites were first synthesized via a free‐radical copolymerization in a tetrahydrofuran solution, and the poor solvent was added slowly to induce the microphase separation of the nanocomposite and result in the formation of nanoparticles. The average particle sizes of the microspheres ranged from 70 to 1000 nm, depending on the reaction conditions. Transmission electron microscopy and scanning electron microscopy indicated a core–shell morphology for the obtained microspheres. Thermogravimetric analysis and X‐ray photoelectron spectroscopy measurements confirmed that the surface of the nanocomposite microspheres was polymer‐rich, and this was consistent with the core–shell morphology. The influence of the synthetic conditions, such as the inorganic composition and the content of the crosslinking monomer, on the particle properties was studied in detail. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3911–3920, 2006     

AN IMPROVED SEARCH-EXTENTION METHOD FOR SOLVING SEMILINEAR PDES

This article will combine the finite element method, the interpolated coefftcient finite element method, the eigenfunction expansion method, and the search-extension method to obtain the multiple solutions for semilinear elliptic equations. This strategy not only grently reduces the expensive computation, but also is successfully implemented to obtain multiple solutions for a class of semilinear elliptic boundary value problems with non-odd nonlinearity on some convex or nonconvex domains. Numerical solutions illustrated by their graphics for visualization will show the efficiency of the approach.     

选择性远程DEPT~(13)C NMR新技术用于新阔叶千里光碱氮氧化合物的结构测定和谱峰归属研究

从湖北蟹甲草根茎中分得一个新的生物碱,选择性远程DEPT~(13)C NMR新技术用于识别NMR信号归属和连接被季碳及杂原子分割的质子自旋系统,确定其结构为新阔叶千里光碱的氮氧化物,如(1)所示。     

Decisive Role of Symmetry in Structures of Three-Body Systems

A three-body system of identical particles is considered in order to demonstrate that the quantum-mechanical symmetry plays a decisive role in determining microscopic structures. Received March 14, 1994; revised July 29, 1994; accepted for publication October 19, 1994     

An evolutionary method for optimization of plate buckling resistance

Optimization of plate buckling resistance is very complicated, because the in-plane stress resultants in the prebuckled state of a plate are functions of thickness distribution. This paper discusses the problem of finding the optimum thickness distribution of isotropic plate structures, with a given volume and layout, that would maximise the buckling load. A simple numerical method using the finite-element analysis is presented to obtain the optimum thickness distribution. Optimum designs of compression-loaded rectangular plates with different boundary conditions and plate aspect ratios are obtained by using the proposed method. Optimum designs from earlier studies and the methods of buckling analysis used to attain these results are discussed and compared with the designs from the proposed method. This paper also examines the reliability of the optimality criterion generally used for plate buckling optimization, which is based on the uniform strain energy density.     

激发态卟啉衍生物研究(Ⅶ)——取代基对卟啉—硝基苯化合物发光特性的影响

本文报导共价链相连的X-P-Y“三合板”型化合物在二甲基甲酰胺(DMF)和苯溶液中的发光特性.结果发现:引入取代基X=Cl—,CH3O—和Y=苯、硝基苯对中心卟啉的吸收和荧光光谱均无明显影响,仅其峰值频率将因溶剂不同而有所偏移.此外,由Cl—取代的卟啉—苯的荧光强度总比CH3O—取代时高;若将Y取代基由苯改换为硝基苯时,将使CH3O—P—Y化合物的荧光增强,但在Cl—P—Y化合物中则出现相反的趋势.不论在何种化合物中,在Y取代基中的苯环上引入NO2—基后,均可使其消光系数减小,而且当硝基在邻位取代时,这一效应更为显著.所有这些变化规律均不因溶剂不同而异.如果我们认为X—P—Y化合物的发光强度变化和其中心的卟啉大环上的π电子云密度偏移有规律性的关联,那么上述的一些取代基效应是可以理解的.进而,我们认为:本文所报导的事实将有助于充实巧妙设计高效利用太阳能的分子体系的科学依据.     

软X射线显微术Si_3N_4薄膜窗口的研制

介绍了在软Ｘ－射线显微术研究领域中有重要应用的Ｓｉ_３Ｎ_４薄膜窗口的实验室制作方法，并形成一套独特制备工艺，Ｓｉ_３Ｎ_４薄膜窗口的研制成功推动了我国软Ｘ射线显微术研究的发展。     

聚（2,5—二甲氧基对苯乙炔）的可溶性前聚物合成及表征

研究了合成聚（２，４－二甲氧基对苯乙炔）的有机可溶性前聚物的反应条件与单体转化率和前聚物产率的关系。实验结果表明：ＮａＯＨ是聚合反应的有效引发剂，适宜的反应条件为：单体与ＮａＯＨ摩尔比为１：１，单体浓度０．０５－０．２ｍｏｌ／Ｌ，聚合时间２ｈ，温度低５℃，正己烷、石油醚作为有机提取剂可有效提高前聚物产率。用ＩＲ、ＵＶ－Ｖｉｓ＇＾ＨＮＭＲ，ＴＧＡ和 ＤＳＣ对前聚物进行了表征。