Streamlined,two-column,simulated countercurrent chromatography for binary separation

We report on a numerical and experimental study of two-column versions of streamlined, multicolumn, semi-continuous chromatography for binary separation. The systems combine a flexible node design, cyclic flow-rate modulation, and relayed operation of the inlet/outlet ports to extend the mass-transfer zone over the largest possible length, while keeping it inside the system at all times. One advantage of these streamlined designs is the simplicity of their physical realization: regardless of the number of columns, they only require two pumps to supply feed and desorbent into the system, while the flow rates of liquid withdrawn from the system are controlled by material balance using simple two-way valves. In one case, an extra pump is needed to recirculate the fluid in closed-loop. A rigorous model-based optimization approach is employed in the optimal design of the cycles to generate solutions that are physically realizable in the experimental set-ups. The optimized schemes for two-column operation supply fresh feed into the middle of the system where the composition of the circulating fluid is closest to that of the feedstock fluid, and recover the purified products, extract and raffinate, alternately at the downstream end of the unit, while desorbent is continuously supplied into the upstream end of the system. By internally recycling part of the non-pure cut fraction, the scheme with a step of closed-loop recycling significantly reduces its solvent consumption. The feasibility and effectiveness of the reported two-column processes have been verified experimentally on the linear separation of nucleosides by reversed phase subject to 99% purity constraints on both products. It is shown that our processes compare favorably against single-column batch chromatography, steady-state recycling, and four-column, open-loop SMB, for the same amount of adsorbent; they are also better than the four-column, closed-loop SMB at high feed throughputs.     

Water-compatible iminium activation: highly enantioselective organocatalytic Michael addition of malonates to α,β-unsaturated enones

The highly enantioselective Michael addition of malonates to α,β-unsaturated ketones in water was reported to be catalyzed by a primary-secondary diamine catalyst containing a long alkyl chain. This asymmetric Michael addition process was found to be effective for a variety of α,β-unsaturated ketones.     

Sensitive and Simple Electrochemical Detection of Lead(II) with Carbon Ionic Liquid Electrode

In this paper a carbon ionic liquid electrode (CILE) was fabricated by using ionic liquid 1‐ethyl‐3‐methylimidazolium ethylsulphate ([EMIM]EtOSO₃) as the modifier and further used as the working electrode for the sensitive anodic stripping voltammetric detection of Pb²⁺. The characteristics of the CILE were investigated by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). In pH 4.5 NaAc‐HAc buffer Pb²⁺ was accumulated on the surface of CILE due to the extraction effect of IL and reduced at a negative potential (‐1.20 V). Then the reduced Pb was oxidized by differential pulse anodic stripping voltammetry with an obvious stripping peak appeared at ?0.67 V. Under the optimal conditions Pb²⁺ could be detected in the concentration range from 1.0 × 10^?8 mol/L to 1.0 × 10^?6 mol/L with the linear regression equation as I_p(μA) = ?0.103 C (μmol/L) + 0.0376 (γ = 0.999) and the detection limit as 3.0 × l0^?9 mol/L (3σ). Interferences from other metal ions were investigated and Cd²⁺ could be simultaneously detected in the mixture solution. The proposed method was further applied to the trace levels of Pb²⁺ detection in water samples with satisfactory results.     

Metal ion mediated molecularly imprinted polymer for selective capturing antibiotics containing beta-diketone structure

A new molecularly imprinted polymer (MIP) targeting to quinolones (Qs) and tetracyclines (TCs) was synthesized using itaconic acid (ITA) and ciprofloxacin (CIP) as a functional monomer and template molecule, respectively. Factors affecting the overall performance of MIP were investigated, and the results showed that Fe(3+) ion play a vital role in the formation of MIP with high molecular imprinting effect. Meanwhile, the chelating ability of monomer, species of template molecule, as well as the molar ratio of monomer and template also contribute to the performance of the obtained MIP. Cyclic voltammetry verified that, with the participation of Fe(3+) ions, a ternary complex of ITA-Fe(3+)-CIP could be formed before polymerization. Compared with conventional MIP prepared from commonly used monomer, methacrylic acid (MAA), the new MIP show significantly enhanced molecular imprinting effect and higher capacity for specific adsorption of target compounds as revealed by static and dynamic binding experiments. The MIP was successfully used as solid-phase extraction (SPE) adsorbent for enriching a broad spectrum of antibiotics containing beta-diketone structure from surface water sample. HPLC detection showed that high recovery rate (78.6-113.6%) was found in these spiked antibiotics, whereas recovery rate for the non structurally related drugs, epinephrine (EP) and dopamine (DOPA), was very low (4.7-7.6%) on the MIP cartridges. The results demonstrate that the MIP prepared by the strategy proposed in this work, could specifically target to a series of structurally related antibiotics containing beta-diketone structure.     

氮掺杂多壁纳米碳管的合成和定量表征

 采用化学气相沉积法制备了 N 掺杂多壁纳米碳管, 并运用透射电子显微镜、N2 物理吸附、热重-差示扫描量热、程序升温氧化和 X 射线光电子能谱等手段对样品进行了表征. 结果表明, 纯化处理的纳米碳管表面 N 含量为 4.2%, 其中包括吡啶、己内酰胺、氧化吡啶、吡啶酮和吡咯等含氮官能团. 研究了各种含氮官能团燃烧的动力学行为. N 原子掺杂进入碳管的石墨结构中, 提高了表面碱性, 有可能用于催化与能源转化领域. 另外, 本文提供了一种可用于场发射器件的杯状闭合结构纳米碳合成方法.     

Synthesis and Crystal Structure of a New Zn(Ⅱ) Complex Exhibiting Strong Luminescence

The title complex,[Zn(ip)2(H2O)2][ZnCl4]·H2O·2DMF 1(ip=imidazo[4,5-f][1,10] phenanthroline),has been synthesized via the slow evaporation of concentrated reaction solution at room temperature.It was characterized by single-crystal X-ray diffraction.Crystal data for C32H36Cl4N10O5Zn2:white prism,0.17mm×0.15mm×0.10mm,monoclinic,space group P2/c,a=11.928(8),b=9.868(6),c=16.520(11),β=104.879(12)°,V=1879(2)3,Z=2,Mr=913.25,Dc=1.614 g/cm3,F(000)=932,μ=1.616 mm-1,λ(MoKα)=0.71073,GOOF=1.045,R=0.0710 and wR=0.1755 for 3055 observed reflections with Ⅰ2σ(Ⅰ).X-ray diffraction study reveals that the title complex has an interesting 3D architecture via hydrogen bonding interactions and π-π interactions.The IR,TGA,XRD and luminescent properties of complex 1 were also studied.     

Synergistic effects of layered double hydroxide with phosphorus-nitrogen intumescent flame retardant in PP/EPDM/IFR/LDH nanocomposites

<正>Synergistic effects of layered double hydroxide(LDH) with intumescent flame retardanct(IFR) of phosphorus-nitrogen (NP) compound in the polypropylene/ethylene-propylene-diene/IFR/LDH(PP/EPDM/IFR/LDH) nanocomposites and related properties were studied by X-ray diffraction(XRD),transmission electron microscopy(TEM),scanning electron microscopy(SEM),limiting oxygen index(LOI),UL-94 test,cone calorimeter test(CCT) and thermo-gravimetric analysis (TGA).The XRD and TEM results show that the intercalated and/or exfoliated nanocomposites can be obtained by direct melt-intercalation of PP/EPDM into modified LDH and that LDH can promote the IFR additive NP to disperse more homogeneously in the polymer matrix.The SEM results provide positive evidence that more compact charred layers can be obtained from the PP/EPDM/NP/LDH sample than those from the PP/EPDM/LDH and PP/EPDM/NP samples during burning.The LOI and UL-94 rating tests show that the synergetic effects of LDH with NP can effectively increase the flame retardant properties of the PP/EPDM/NP/LDH samples.The data from the CCT and TGA tests indicate that the PP/EPDM/NP/LDH samples apparently decrease the HRR and MLR values and thus enhance the flame retardant properties and have better thermal stability than the PP/EPDM/LDH and PP/EPDM/NP samples.     

土壤颗粒表面电场作用下固-液界面Mg2+-K+与Ca2+-K+交换动力学的比较研究

通过恒流法研究了不同表面电场作用下Mg2+、Ca2+吸附动力学. 结果发现: (1)实验初期阶段是强静电力作用下的零级动力学过程和一定反应时间后的弱静电力作用下的一级动力学过程, 且零级速率过程和一级速率过程之间存在明显的转折点; (2)不同电解质构成中Ca2+的吸附速率明显快于Mg2+的, 平衡吸附量也大于Mg2+的, 且Ca2+在土壤颗粒表面的覆盖度比Mg2+在土壤颗粒表面的覆盖度高; (3)离子的相对有效电荷系数与土壤颗粒表面电场作用的不同是各体系中Ca2+、Mg2+吸附动力学有差别的根本原因; (4)根据离子吸附的理论模型可以分别计算出速率系数、平衡吸附量、离子在土壤颗粒表面的覆盖度以及固定液的体积, 这些参数可以定量评估土壤颗粒表面电场对离子吸附动力学的影响.     

N—O键解离焓的密度泛函理论研究

在高精度计算方法G3和G3B3的基础上,比较了密度泛函理论(DFT)十几种方法对N—O键解离焓(BDE)相对于实验值的计算精度,发现用B3P86方法计算15种化合物N—O键的BDE,均方根误差最小,仅为6.36kJ·mol-1,计算值与实验值的线性相关系数为0.991.在此基础上,用该方法分别计算了非芳香化合物及芳香化合物的N—O键BDE.通过自然键轨道分析,发现部分N—O键的BDE与N—O键的键长、原子电荷密度及键级之间存在定量关系.此外,在B3P86方法的基础上预测了几种典型的杂环芳香化合物N—O键BDE值.     

利用水热法制备氧化锌微米球

利用水热法制备出具有特殊形貌的ZnO微米球.利用X射线粉末衍射仪(XRD)和扫描电镜(SEM)对ZnO进行了表征.