Electropolymerization of single‐walled carbon nanotubes composited with polypyrrole as a solid‐phase microextraction fiber for the detection of acrylamide in food samples using GC with electron‐capture detection

We developed a solid‐phase microextraction coupled to GC with electron‐capture detection method for the detection of acrylamide in food samples. Single‐walled carbon nanotubes and polypyrrole were electropolymerized onto a stainless‐steel wire as a coating, which possessed a homogeneous, porous, and wrinkled surface, chemical and mechanical stability, long lifespan (over 300 extractions), and good extraction efficiency for acrylamide. The linearity range between the signal intensity and the acrylamide concentration was found to be in the range 0.001–1 μg/mL, and the coefficient of determination was 0.9985. The LOD, defined as three times the baseline noise, was 0.26 ng/mL. The reproducibility for each single fiber (n = 6) and the fiber‐to‐fiber (n = 5) repeatability prepared in the same batch were less than 4.1 and 11.2%, respectively.     

Performance of hydrophobic interaction ligands for human membrane‐bound catechol‐O‐methyltransferase purification

Despite of membrane catechol‐O‐methyltransferase (MBCOMT, EC 2.1.1.6) physiological importance on catecholamines’ O‐methylation, no studies allowed their total isolation. Therefore, for the first time, we compare the performance of three hydrophobic adsorbents (butyl‐, epoxy‐, and octyl‐Sepharose) in purification of recombinant human COMT (hMBCOMT) from crude Brevibacillus choshinensis cell lysates to develop a sustainable chromatographic process. Hydrophobic matrices were evaluated in terms of selectivity and hMBCOMT's binding and elution conditions. Results show that hMBCOMT's adsorption was promoted on octyl and butyl at ≤375 mM NaH₂PO_4, while on epoxy higher concentrations (>850 mM) were required. Additionally, hMBCOMT's elution was promoted on epoxy, butyl, and octyl using respectively 0.1–0.5, 0.25–1, and 1% of Triton X‐100. On butyl media, a stepwise strategy using 375 and 0 mM NaH₂PO₄, followed by three elution steps at 0.25, 0.7 and 1% Triton X‐100, allowed selective hMBCOMT isolation. In conclusion, significant amounts of MBCOMT were purified with high selectivity on a single chromatography procedure, despite its elution occurs on multiple peaks. Although successful applications of hydrophobic interaction chromatography in purification of membrane proteins are uncommon, we proved that traditional hydrophobic matrices can open a promising unexplored field to fulfill specific requirements for kinetic and pharmacological trials.     

Prenylated Benzene Metabolites from Melicope pteleifolia

Chemical investigation on the stem and root of Melicope pteleifolia afforded three new prenylated benzene metabolites as racemic mixtures, named pteleifolins A–C ( 1 – 3 , resp.). Their gross structures were elucidated on the basis of spectroscopic analysis, especially 2D‐NMR experiments. An enantiomer resolution of (±)‐ 1 using chiral HPLC was performed, and the absolute configuration of the enantiomers were determined to be (+)‐(S)‐ 1 and (?)‐(R)‐ 1 by means of circular‐dichroism analysis.     

Three-Component,Four-Molecule,Ru-Catalyzed Cascade Reactions of Indoles and Alkyl Bromides with Sodium Nitrite

Abstract

An operationally simple domino approach for the ruthenium-catalyzed synthesis of (E)-2,3′-bi(3H-indol)-3-one O-alkyl oximes by the region- and stereoselective three-component, four-molecule reactions of indoles with sodium nitrite and alkyl bromides under mild reaction condition in dimethylformamide is described. Remarkably, multiple bonds including C?C, C=N, and C?O bonds were conveniently formed in one pot. The reaction is tolerant to air and is atom economical, in accordance with the concept of modern green chemistry.     

Reaction of Imidazo[1,2‐a]pyridines with Aliphatic Aldehydes: A Simple and Efficient Method for the Preparation of Novel C‐3 Vinylic Derivativesof Imidazo[1,2‐a]pyridines

A simple and efficient method for the preparation of novel C‐3 vinylic derivatives of imidazo[1,2‐a]pyridines has been developed by the reaction of imidazo [1,2‐a]pyridines with appropriate aliphatic aldehydes in acetic acid in a sealed tube.     

α,α-Dialkylglycines obtained by solid phase Ugi reaction performed over isocyanide functionalized resins

The multicomponent Ugi reaction is a straightforward method that can be used for the synthesis of highly hindered C-tetrasubstituted amino acids by reacting an amine, a ketone or aldehyde, a carboxylic acid and an isocyanide. In the present work, the synthesis of several α,α-dialkylglycines (α,α-diethylglycine, Deg; α,α-dipropylglycine, Dpg; 1-amino-1-cyclohexanecarboxylic acid, Ac₆c) was achieved by solid phase Ugi reaction using resins functionalized with the isocyanide group. Since no resins with these features were available commercially, the functionalization of an aminomethylated resin started by the use of glycine (Gly), β-alanine (β-Ala) and γ-aminobutyric acid (GABA) as spacers. After spacer N-formylation, followed by dehydration, isocyanide functionalised resins were obtained. The resins were then used in solid phase Ugi reaction, using phenylacetic acid as the acid component, 4-methoxybenzylamine as the amine component and different ketones, to afford the desired N-acylated α,α-dialkylglycines in good overall yields (60–80%), after acidolytic cleavage from the resin, thus proving the feasibility of this approach.     

Supramolecular organogelators based on Janus type AT nucleosides

J-AT nucleoside-based organogelators 1a and 1b were designed and synthesized. They were endowed with unparalleled superiority to natural nucleobase analogues 2–6 to gelate aromatic solvents due to their excellent self-assembly properties. The J-AT nucleoside-based organogelators showed a specific self-complementary base pair recognition characteristic. The gel stabilities of 1a and 1b were drastically influenced by adenine analogue 2, hardly affected by thymine analogue 3, uracil analogue 4, cytosine analogue 5, and mildly interrupted by guanine analogue 6.     

纳米碳材料非金属催化的研究进展

纳米碳材料直接作为催化剂的非金属碳催化是目前材料科学与催化领域的前沿方向之一.相对于传统金属催化剂,纳米碳材料催化剂具有高效环保、低能耗、耐腐蚀等优点.在烃类转化、化学品合成、能源催化等领域表现出优异的催化性能和发展潜力.综述了近年来纳米碳非金属催化研究的最新进展,主要包括新型纳米碳材料的表面性质、催化特性、反应机理和宏观制备等关键问题,并对纳米碳催化存在的挑战和前景进行了展望.     

Biomass Composition, Lipid Characterization, and Metabolic Profile Analysis of the Fed-Batch Fermentation Process of Two Different Docosahexanoic Acid Producing Schizochytrium sp. Strains

Growth and fermentation characteristics, biomass composition, lipid characterization and metabolic profiling analysis of two different Schizochytrium sp. strains, the original strain and the industrial adaptive strain, were investigated in the fed-batch fermentation process. The final cell biomass, total lipids content, docosahexanoic acid (DHA) content and DHA productivity of the adaptive strain were much higher than those of the original strain. The metabolic distinctions which extensively existed between these two strains were revealed by the score plot of principal component analysis. In addition, potential biomarkers responsible for discriminating different strains were identified as myo-inositol, histidine, alanine, asparagine, cysteine, and oxalic acid. These findings provided new insights into the industrial strain screening and further improvement of DHA production by Schizochytrium sp.