二水·2-羰基丙酸水杨酰腙合铜(Ⅱ)配合物的晶体结构及生物活性

在水中,以2-羰基丙酸水杨酰腙与硫酸铜反应,制得新配合物Cu(C₁₀H₈N₂O₄)(H₂O)₂(C₁₀H₈N₂O₄^2-为2-羰基丙酸水杨酰腙负离子),并以水为溶剂培养了单晶,测试了晶体结构,该单晶为深绿色,属单斜晶系,空间群为C2/c,晶胞参数a=1.1297(1)nm,b=0.9824(8)nm,c=2.1973(3)nm,β=91.91(8)°,V=2.43749(8)nm³,Z=8,μ=1.817mm^-1,D_c=1.743Mg·m^-3,F(000)=1304,R=0.0264,wR=0.0654,GOF=1.052。其测试结果表明在配合物中Cu²⁺处于五配位的四方锥配位环境,配位原子分别来自1个三齿配体2-羰基丙酸水杨酰腙负二价离子的2个O原子和1个N原子,2个水分子中的O原子,其中1个水分子的O原子处于四方锥的锥顶,锥底的配位原子基本处于同一平面上。对该配合物所作的皿内抑菌试验和盆栽活体实验表明,配合物对小麦条锈病、白菜黑斑病及辣椒疫霉菌等分别有96%、89%、100%的抑制率,且有一定的助长作用。     

细胞色素C的电化学行为研究

本文评述了细胞色素Ｃ电化学研究的发展概况，重点介绍了细胞色素Ｃ在促进剂作用下的电化学行为，促进剂种类，影响促进作用的因素及促进机理。     

VOCs控制催化剂的研制

以堇青石蜂窝陶瓷体为第一载体、γ-Al2O3为第二载体,制成的含稀土La和过渡金属元素的复合氧化物催化剂,在连续流动的反应体系上评价了催化剂对苯、氰氢酸、乙酸和氯苯等VOCs的氧化反应活性.结果表明: 采用LaCuMn组合制备的催化剂,La的含量在7%～10%左右、Cu的含量在5.5%左右、Mn的含量在7.5%左右时,第二载体γ-Al2O3的负载以采用半胶、pH值4～5、加入某些活性剂、负载量以7%～10%、活化温度为400～500 ℃时制成的催化剂的活性最好,研制的VOCs控制催化剂对各种VOCs均具有很高的催化活性.     

Fibers and 3D mesh scaffolds from biodegradable starch-based blends: production and characterization

The aim of this work is the production of fibers from biodegradable polymers to obtain 3D scaffolds for tissue engineering of hard tissues. The scaffolds required for this highly demanding application need to have, as well as the biological and mechanical characteristics, a high degree of porosity with suitable dimensions for cell seeding and proliferation. Furthermore, the open cell porosity should have adequate interconnectivity for a continuous flow of nutrients and outflow of cell metabolic residues as well as to allow cell growth into confluent layers. Blends of corn starch, a natural biodegradable polymer, with other synthetic polymers (poly(ethylene vinyl alcohol), poly(epsilon-caprolactone), poly(lactic acid)) were selected for this work because of their good balance of properties, namely biocompatibility, processability and mechanical properties. Melt spinning was used to produce fibers from all the blends and 3D meshes from one of the starch-poly(lactic acid) blends. The experimental characterization included the evaluation of the tensile mechanical properties and thermal properties of the fibers and the compression stiffness, porosity and degradation behavior of the 3D meshes. Light microscopy picture of 3D meshes.     

一种用于空气中二氧化碳现场测定的新方法

一种用于空气中二氧化碳现场测定的新方法于爱民，杨广德，王锐，金钦汉（吉林大学化学系，长春１３００２３）关键词微波诱导等离子体，离子化检测器，气相色谱仪，二氧化碳二氧化碳在植物生长代谢及其生态平衡过程中起着重要作用，现场测定二氧化碳是目前农业、环境科学...     

甲基丙烯酸甲酯悬浮聚合实验教学的改进

选用氢氧化镁为分散剂,甲基丙烯酸甲酯(MMA)为单体,进行悬浮聚合反应,研究了分散剂用量、引发剂用量、水和单体比、搅拌速度、反应温度及反应时间对聚合物珠粒大小、均匀程度和产率的影响。结果表明:与目前高分子实验教材普遍选用的以聚乙烯醇(PVA)为分散剂的悬浮聚合反应相比,以氢氧化镁为分散剂,具有操作简单、聚合时间短、体系稳定性高等优点,可代替原有的悬浮聚合反应实验,作为高分子化学实验的教学课程内容。     

A vacuum ultraviolet photoionization mass spectrometric study of acetone

The photoionization and dissociative photoionization of acetone have been studied at the photon energy range of 8-20 eV. Photoionization efficiency spectra for ions CH3COCH3+, CH3+, C2H3+, C3H3+, C3H5+, CH(2-)CO+, CH3CO+, C3H4O+, and CH3COCH2+ have been measured. In addition, the energetics of the dissociative photoionization has been examined by ab initio Gaussian-3 (G3) calculations. The computational results are useful in establishing the dissociation channels near the ionization thresholds. With the help of G3 results, the dissociation channels for the formation of the fragment ions CH3CO+, CH2CO+, CH3+, C3H3+, and CH3COCH2+ have been established. The G3 results are in fair to excellent agreement with the experimental data.     

水热法合成Ce0.67Zr0.33O0.2固溶体研究

采用两种不同前驱体通过水热法合成了Ce0.67Zr0.33O0.2固溶体,并通过XRD,BET,TPR等手段考察了样品的相结构,比表面及还原特性.结果表明,在180℃,12 h的水热条件下,以共沉淀产物为前驱体所制得的Ce0.67Zr0.33O0.2固溶体比表面积较高,但存在一定程度的相分离;以凝胶产物为前驱体制得的Ce0.67Zr0.33O0.2固溶体结构更完整,具有良好的还原特性及热稳定性.     

Recent Advances in Rare‐Earth Polypnictides

The polypnictide complexes of rare earth cations have drawn the attention of the scientific community for their uncommon bonding modes and potential applications. Herein, we present a systematic and comprehensive summary on recent advances in the field of rare earth polypnictides, focusing on their synthesis, structures, and reactivities. The structural stabilizing effects imposed by the electropositive rare earth cations as well as the reducing capability of rare earth precursors in the synthesis of these polypnictide complexes are described in this review. We also disscuss in detail the bonding interactions and coordination modes between rare earth cations and polypnictide clusters as well as the similarities and the peculiarity of some structures.