高峰值功率多注速调管的初步研究

 高峰值功率速调管因其作为高功率微波源而受到各国的重视。采用单电子注方案的高峰值功率速调管存在许多难以克服的问题,如工作电压很高,输出效率偏低,系统体积偏大等。对高峰值功率多注速调管进行了初步的研究,重点研究了S波段50 MW多注速调管的电子光学系统和高频互作用系统。研究表明,在与单注速调管相同的功率电平下,多注速调管的工作电压明显降低,输出效率明显提高,同时,这种管型也存在结构复杂、电子注聚焦和消除非工作模式困难等技术问题。     

CuAPTPP-TDI-TiO2光催化微球的合成及其光催化性能 (cited: 1)

采用Adler法合成了5-(4-氨基苯基)-10,15,20-三苯基卟啉铜配合物(CuAPTPP),通过甲苯二异氰酸酯(TDI)的桥联作用对TiO₂微球进行表面修饰,使TDI分子中的两个活性TDI基团分别与TiO₂表面的羟基和CuAPTPP的氨基反应,将CuAPTPP敏化剂分子以化学键合的方式固定在TiO₂表面,形成光催化微球CuAPTPP-TDI-TiO₂．通过FT-IR、XRD、SEM、EA、UV-Vis和DRS等测试手段对CuAPTPP-TDI-TiO₂进行结构表征．讨论了桥联分子TDI修饰量对光催化微球性能的影响,确定了TDI与TiO₂的最佳摩尔比．以亚甲基蓝(MB)为降解对象,考察了CuAPTPP-TDI-TiO₂微球的可见光催化性能．结果表明,桥联分子TDI在CuAPTPP与TiO₂微球表面形成了牢固的化学键,复合微球在150 W氙灯辐照下降解10 mg/LMB溶液,120 min降解率可达98.7%,其降解率过程服从一级动力学规律,测得降解速率常数为5.1×10^-2 min^-1,半衰期为11.3 min．催化微球在回收4次的条件下,对MB的降解率仍保持在90%以上．     

陶瓷材料在压剪联合冲击加载下动态响应的实验研究

 应用57 mm压剪炮和双磁场IMPS粒子测试系统对95%的Al₂O₃陶瓷材料在压剪联合加载条件下的力学行为进行了实验研究,测量得到了材料内部压缩波（P波）、剪切波（S波）的加载、卸载和传播规律。对剪切波的衰减随载荷的变化进行了研究,初步得到95% Al₂O₃陶瓷材料在压剪联合载荷冲击下发生损伤的纵向应力阀值是4.86 GPa。     

基于回波平移序列的快速三维磁共振温度成像方法

高强度聚焦超声（HIFU）是一种无创的热消融疗法，为保证其安全性和有效性，需要一种精度高、速度快的测温方法在其治疗过程中对温度进行监控.基于质子共振频率位移（PRFS）的磁共振温度成像（MRT）对温度具有较高的灵敏度，且与温度具有良好的线性关系，因此常被用于引导HIFU治疗.然而在实际应用中，HIFU治疗的最大隐患在于可能造成表皮灼伤，并且灼伤区域可能与焦点区域相隔较远.因此MRT的监控范围十分重要.本文基于三维回波平移成像序列，结合可控混叠的空间并行成像技术，实现了时间分辨率为3 s的快速三维温度成像.为了验证该方法的精度，本文首先设计了仿体降温实验，利用光纤温度计验证回波平移序列测温的准确度和精确度.然后在室温条件下扫描离体猪肉组织，对比加速前后的MRT的测温精确度.在HIFU加热条件下扫描离体猪肉组织，对比加速前后的MRT的测温准确度.结果显示，本文提出的方法可以在3 s内完成三维温度精准测量，对于HIFU治疗的安全监控具有重要意义.     

TBAB包络化合物浆的管内流动再层流化现象

TBAB包络化合物浆是一种新型高密度潜热输送材料,在中央空调或区域供冷等系统中作为替代常规冷水的冷量输送媒体具有显著的节能应用前景.采用实验方法研究了A型TBAB包络化合物浆在水平直管内的层流和湍流流动特性.通过分析流动阻力随流速和固相含量等参数的变化规律,发现固相含量的增加有利于维持流动的层流趋势,在定流速条件下随着固相含量的增加流动状态会由湍流转变为层流,即出现"再层流化"现象,并且由于再层流化现象的出现,包络化合物浆的流动会出现"阻力降低区".     

Identification of urinary metabolites of imperatorin with a single run on an LC/Triple TOF system based on multiple mass defect filter data acquisition and multiple data mining techniques

The detection of drug metabolites, especially for minor metabolites, continues to be a challenge because of the complexity of biological samples. Imperatorin (IMP) is an active natural furocoumarin component originating from many traditional Chinese herbal medicines and is expected to be pursued as a new vasorelaxant agent. In the present study, a generic and efficient approach was developed for the in vivo screening and identification of IMP metabolites using liquid chromatography-Triple TOF mass spectrometry. In this approach, a novel on-line data acquisition method mutiple mass defect filter (MMDF) combined with dynamic background subtraction was developed to trace all probable urinary metabolites of IMP. Comparing with the traditionally intensity-dependent data acquisition method, MMDF method could give the information of low-level metabolites masked by background noise and endogenous components. Thus, the minor metabolites in complex biological matrices could be detected. Then, the sensitive and specific multiple data-mining techniques extracted ion chromatography, mass defect filter, product ion filter, and neutral loss filter were used for the discovery of IMP metabolites. Based on the proposed strategy, 44 phase I and 7 phase II metabolites were identified in rat urine after oral administration of IMP. The results indicated that oxidization was the main metabolic pathway and that different oxidized substituent positions had a significant influence on the fragmentation of the metabolites. Two types of characteristic ions at m/z 203 and 219 can be observed in the MS/MS spectra. This is the first study of IMP metabolism in vivo. The interpretation of the MS/MS spectra of these metabolites and the proposed metabolite pathway provide essential data for further pharmacological studies of other linear-type furocoumarins.     

Synthesis of high molecular weight and narrow molecular weight distribution poly(acrylonitrile) via RAFT polymerization

Well‐defined polyacrylonitrile (PAN) of high viscosity‐average molecular weight (M_η = 405,100 g/mol) was successfully synthesized using reversible addition‐fragmentation chain transfer polymerization. The polymerization exhibits controlled characters: molecular weights of the resultant PANs increasing approximately linearly with monomer conversion and keeping narrow molecular weight distributions. The addition of 0.01 equiv (relative to monomer acrylonitrile) of Lewis acid AlCl₃ in the polymerization system afforded the obtained PAN with an improved isotacticity (by 8%). In addition, the influence of molecular weights and molecular weight distributions of PANs on the morphology of the electrospun fibers was investigated. The results showed that, under the same conditions of electrospinning, average diameter (247–1094 nm) of fibers increased with molecular weights of PANs, and it was much easier to get “uniform” diameter fibers while using PANs with narrow molecular weight distributions as the precursor of electrospinning. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

室内环境中脑控轮椅的路径跟踪控制

为了实现室内环境中脑控轮椅的自主导航,提出了一种简单有效的路径跟踪控制方法。给定的路径通常被表示为一系列离散点,根据这一特点,提出了分段直线路径跟踪方法,即依次跟踪由前后两个路径点构成的直线路径到达目标点。基于预瞄点技术并结合模糊算法和传统的PID控制方法设计控制器,完成各分段直线路径的跟踪,并给出了有效的切换条件。实验结果表明,本文提出的路径跟踪控制方法能够使脑控轮椅在室内环境中精确地跟踪给定路径。     

具有奇性与真空粘性依赖于密度的非牛顿流局部强解的存在唯一性

研究一维有界区间上粘性依赖于密度且具有奇性、初始允许真空的可压缩非牛顿流.通过正则化奇性项以及逐步迭代构造初边值问题的逼近解,对逼近解取极限得到其局部强解的存在唯一性,进一步推广了相关文献中关于非牛顿流解的存在性结果.     

A Furan-based Phosphaphenanthrene-containing Derivative as a Highly Efficient Flame-retardant Agent for Epoxy Thermosets without Deteriorating Thermomechanical Performances

In order to reduce greenhouse gas emissions, developing flame retardants from bio-based resources has aroused extensive interest in recent years. In this work, we utilized furfural(biomass) and 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide(DOPO) to synthesize a biobased co-curing agent(FGD) to combine with 4,4'-diaminodiphenyl methane(DDM) for obtaining a low-phosphorus loading flame-retardant epoxy thermosets. The introduction of FGD decreased the activation energy of the curing progress, enhanced the mechanical properties of the epoxy thermosets, and did not affect the glass transition temperature of the epoxy thermosets. EP-5.0 had a lower thermal degradation rate and a doubled char yield compared with EP-0. The phosphorus content of EP-5.0 was only 0.45 wt%, while EP-5.0 reached the UL-94 V-0 rating with a high LOI value of 32%. Compared with EP-0, the PHRR of EP-2.5 and EP-5.0 decreased by 22.3% and 31.3%, respectively. The SEM results showed that the addition of FGD made the char residues more uniform and denser, which could effectively prevent combustible volatiles from escaping from the degradation area to the flame area and isolate the heat transfer so that the epoxy thermosets had an excellent flame-retardant performance.