Synthesis,Characterizations, Magnetism and Thermal Degradation of a 2‐Fold Interpenetrated 3D Cobalt‐Organic Framework

A new coordination polymer, [Co₂(L)₂(4,4′‐bipy)]_n·3nH₂O ( 1 ) based on 5‐(3‐methyl‐5‐phenyl‐4H‐1,2,4‐triazol‐4‐yl)isophthalic acid (H₂ L ) and 4,4′‐bipyridine (4,4′‐bipy) has been hydrothermally synthesized and characterized by single‐crystal X‐ray diffraction, XRPD, IR, and elemental analysis. Temperature‐dependent magnetic susceptibility and thermal degradation for 1 were also studied. The asymmetric unit of compound 1 consists of two crystallographically independent Co(II) ion, two L ^2? ligand, one 4,4′‐bipy ligand, and three lattice water molecules. The 2D triangle networks were linked by the bridging 4,4′‐bipy ligand to give rise to a 2‐fold interpenetrated 3D architecture. The simplest cyclic motif of the 2D networks is a triangle ring consisting of three Co(II) cations and three L ^2? ligands. So we can define Co(II) ions as 4‐connected nodes and the L ^2? ligands as 3‐connected nodes. Thus, the 3D structure can be described as a 2‐fold parallel interpenetrated ins InS 3,4‐conn topology.     

激光烧蚀-多接收电感耦合等离子体质谱测定铀颗粒物中铀全同位素比值

建立了铀颗粒物中铀全同位素比值的分析方法,采用双面胶带装载铀颗粒物样品,优化激光烧蚀-多接收电感耦合等离子体质谱的运行参数,用标准样品交叉法校正质量分馏和探测器检测效率,测定了粒径几十微米的铀标准物质CRM124-1、GBW04234和GBW04238中铀全同位素比值.本方法对铀颗粒物中235U/238U、234 U/235U和236 U/235U测量的相对实验标准不确定度分别小于0.050％,1.7％和1.8％,测量结果与参考值在不确定度范围内符合.研究表明,本方法可快速、准确、高精度地测定铀颗粒物中铀全同位素比值.     

Simultaneous determination of chlorpyrifos and 3,5,6-trichloro-2-pyridinol in duck muscle by modified QuEChERS coupled to gas chromatography tandem mass spectrometry (GC-MS/MS)

A rapid, specific, and sensitive method based on modified quick, easy, cheap, effective, rugged, and safe (QuEChERS) coupled to gas chromatography tandem mass spectrometry (GC-MS/MS) was developed and validated for simultaneous determination of chlorpyrifos (CP) and its metabolite 3,5,6-trichloro-2-pyridinol (TCP) in duck muscle. The residues of CP and TCP were extracted by acidified acetonitrile. The fat layer of the extract was removed under ?20 °C, then the organic layer was evaporated. The analytes were derivatized by N-(tert-butyldimethylsilyl)-N-methyltrifluoroacetamide (MTBSTFA) and cleaned up by a mixture of 150 mg MgSO₄, 25 mg graphitized carbon black (GCB), and 50 mg N-propylethylenediamine (PSA) to remove interference. The final extract was analyzed by GC-MS/MS. Recovery values at the spiking concentrations ranged from 86.2 to 92.3 % for CP and from 74.8 to 81.8 % for TCP, with relative standard deviations (RSDs) lower than 9.5 and 12.3, respectively. The correlation coefficients of CP (from 2 to 2,000 μg/kg) and TCP (from 1 to 1,000 μg/kg) were equal to or higher than 0.998. The limits of detection (LODs) were 0.3 and 0.15 μg/kg, and the limits of quantification (LOQs) were 1.0 and 0.5 μg/kg for CP and TCP in duck muscle, respectively. The average intra- and inter-day accuracy ranged from 84.6 to 91.2 % for CP and 75.6 to 82.3 % for TCP, and the intra- and inter-day precisions were from 5.8 to 8.2 % for CP and 6.5 to 11.9 % for TCP. Furthermore, the CP and TCP residues in duck muscle samples were detected for dietary risk assessment using the validated method.

泡沫铝负载钌基催化剂应用于N2O的低温催化分解研究

将导热性能良好的泡沫铝作为载体,羰基钌为前驱体制备了一系列不同形态的钌基催化剂应用于N2O的低温催化分解研究.采用XRD、XPS、SEM、TEM、BET、H2-TPR等方法对催化剂进行了表征,于石英管固定床反应器上对催化剂性能进行了评价.重点考察了泡沫铝作为催化剂载体的可行性、载体的处理方法对催化剂活性的影响以及RuO2、Ru、Ru3(CO)12所表现出的活性差异.结果表明:泡沫铝作为催化剂载体,能够促进N2O的催化分解;泡沫铝经H2O2处理有利于提高其对活性中心的附着力,提高催化活性;N2O浓度为1%,Ru负载量为0.3%,活性中心分别为Ru3(CO)12、Ru、RuO2时,N2O完全转化温度依次为285、380和415℃;活性较高的Ru3(CO)12/泡沫铝催化剂在长时间作用后活性组分转变为RuO2.     

高效液相色谱/荧光检测法测定纺织品中7种阴离子荧光增白剂

建立了纺织品中MST,ABP,VBL,4BK,CBS,CXT和WG 7种阴离子荧光增白剂(FWAs)的前处理方法以及高效液相色谱荧光检测(HPLC/FLD)方法。样品经水-甲醇(25∶75)提取后直接由HPLC/FLD进行定性定量分析。采用Phenomenex Gemini 5u C18(150 mm×4.6 mm,5μm)色谱柱进行分离,以乙腈-2.5mmol/L醋酸铵溶液为流动相,梯度洗脱。7种阴离子FWAs的相关系数均不小于0.999 6,定量下限(LOQs,S/N=10)为0.1~5.0 mg/kg。不同添加水平下,阴性棉织品和毛织品中7种阴离子FWAs的回收率为89.5%~98.9%,相对标准偏差(RSDs)为2.4%~4.7%。该方法简单、灵敏度高、分析时间短,具有一定实际应用价值。     

特种合金钢系列标准物质研制

介绍了特种合金钢系列标准物质的研制过程。采用合理的冶炼锻轧工艺,选取不同部位的样品进行均匀性检验,确定了15种元素的认定值及扩展不确定度,并进行了线性、一致性考察以及与国内外同类标准物质的比对。结果表明,本套特种合金钢系列标准物质的均匀性良好,定值准确且有良好的梯度分布。     

第一性原理研究MgZn2相的电子结构及磁性质

运用密度泛函理论的第一性原理计算分析了MgZn₂相的电子结构及相关磁性质。能带结构和态密度分析表明Zn4s和Zn4p轨道、Mg3s和Mg3p轨道分别发生sp态杂化,然后杂化态之间相互作用而形成Zn-Mg键;Mulliken布居分布计算显示:Zn₁-Mg(Zn₁是处于晶格边缘的Zn原子)和Zn₂-Mg(Zn₂是处于晶格内部的Zn原子)电子云重叠布居数接近0,电子密度分析显示Zn-Mg之间电子密度分布具有明显的定域性。结合上述结果与Zn、Mg原子的电负性差异,确定Zn-Mg键为极性共价键。分态密度(PDOS)分析显示,Zn₁-Mg键和Zn₂-Mg键的差异主要表现在Zn₂4s轨道在-10~-6 eV区域对成键的贡献度高于Zn₁4s轨道,而Zn₁4s轨道在2~5 eV区域对成键的贡献度高于Zn₂4s轨道。进一步对MgZn₂的积分自旋态密度和磁矩计算表明:MgZn₂磁性质表现为顺磁性,其磁性主要来源于Zn₁-Mg键中的2个自旋相同的未配对电子;MgZn₂的顺磁性特性将使Al-Zn-Mg-Cu(7xxx系)高强铝合金产生磁致塑性效应。     

Er3+/Yb3+共掺杂La2TiO5荧光粉体的制备及上下转换荧光性质研究

使用溶胶-凝胶法制备了Er³⁺单掺及Er³⁺/Yb³⁺共掺La₂TiO₅荧光粉体样品。经过1 100 ℃下3 h的煅烧,得到了较好的微晶。X射线粉末衍射测试表明样品中不含杂质相。扫描电镜观察表明样品颗粒范围为100~300 nm。紫外激发光谱中,在250~320 nm范围内出现Er离子和临近配位氧离子之间强烈的电荷转移跃迁峰,在350~500 nm出现Er离子f-f跃迁尖锐的吸收峰。在378 nm激发下,Er离子发射强烈的特征绿光(546 nm, ⁴S_3/2-⁴I_5/2),当Er离子物质的量分数达到1%,发射峰强度达到最大。在980 nm激发下的上转换光谱中,Yb离子的共掺杂有效的敏化上转换发光强度。详细讨论了样品的上下转换发光机理及相应能量传递过程。同时测试了样品的荧光衰减和量子产率。     

高碘酸氧化法快速测定进口粗甘油中甘油含量

建立了高碘酸氧化法快速测定进口粗甘油中甘油含量的分析方法。对高碘酸钠加入量、溶液pH值和放置时间等主要影响因素进行了考察。经试验确定了最佳实验条件:质量浓度为60 g/L的高碘酸钠溶液加入量35mL,pH值在0.4～1.6之间,放置时间40 min。在选定实验条件下,该方法测定结果的相对标准偏差为1.26%(n=7),加标回收率为97.2%～104.1%。     

金属-有机骨架化合物为前驱体制备CuO/CeO2催化剂及在富氢条件下催化CO的氧化

采用金属-有机骨架化合物(MOFs)Ce(1,3,5-BTC)(H2O)6为前驱体浸渍Cu2+离子后焙烧得到CuO/CeO2催化剂(B系列),并应用于富氢气氛中CO优先氧化反应(CO-PROX).通过与CuO/CeO2催化剂(A-600)对比发现,不同的MOFs前驱体对催化剂铜活性物种的分散程度有很大影响.X射线衍射分析(XRD)、透射电子显微镜(TEM)和氛气程序升温还原(H2-TPR)等表征均证明B系列催化剂表面铜有聚集现象,由此增加了催化剂的抗H2O和CO2性能.