利用飞秒激光等离子体产生的超热电子进行衍射实验的可行性研究

利用高强度超短脉冲激光与铝靶相互作用可以产生高能超热电子,这些超热电子入射到铝单晶上时将发生衍射.对高强度超短脉冲激光产生的超热电子与晶体的相互作用产生衍射及利用这样的衍射进行晶体结构分析的可行性进行了探讨 关键词： 等离子体 超热电子 衍射 晶体     

颗粒增强金属基复合材料变形强化中的应变梯度效应

 针对单轴压缩实验,根据颗粒增强金属基复合材料中颗粒和基体两相的局部变形协调条件,并通过简单的位错模型,确定出与变形协调相应的几何必需位错密度,进而导出一种颗粒强化-应变梯度律。从中可以清楚地看出,颗粒增强金属基复合材料的强化由材料的微结构特征几何参数l和基体应变梯度联合控制。对于颗粒含量一定的复合材料,颗粒越小,应变梯度越高,强化效果越好。这一结果揭示了,颗粒强化及尺寸效应主要是通过应变梯度效应来表现的。这也同时说明,应变梯度可能是控制材料变形与断裂的重要因素之一。     

CuNaY分子筛的制备及其催化甲醇氧化羰基化

采用多种铜盐溶液与NaY分子筛离子交换制备了CuNaY催化剂,通过加入氨水提高溶液pH值以及高温活化,显著提高了该催化剂对甲醇氧化羰基化合成碳酸二甲酯的反应活性。不同的铜盐水溶液交换制备的CuNaY催化剂催化活性不同,添加氨水将溶液pH值调节为11后,离子交换制备的CuNaY催化剂的催化活性和DMC选择性明显升高且趋于一致。经元素分析、XRD、XPS和H₂-TPR表征可知,加入氨水可促进Cu²⁺离子交换的进行,提高CuNaY催化剂中Cu的交换量,催化剂中约75%的Cu²⁺定位于分子筛的超笼中。     

无序双层六角氮化硼量子薄膜的电子性质

基于安德森紧束缚模型,本文研究了无序双层六角氮化硼量子薄膜的电子性质. 数值计算结果表明在双层都无序掺杂的情况下,六角氮化硼量子薄膜的电子是局域的, 其表现为绝缘体性质;而对于单层掺杂(无论是氮原子还是硼原子)的双层六角氮化硼量子薄膜, 在能谱的带尾出现了持续的迁移率边.这就说明在单层掺杂的双层六角氮化硼量子薄膜中产生了 金属绝缘体转变.这一结果证实了有序-无序分区掺杂的理论模型,为理解及调控双层六角氮化硼量子薄膜 的电子性质提供了有益的理论指导.     

Organophosphine/phosphite‐stabilized silver(I) complexes bearing N‐acetylbenzamide ligand: synthesis,characterization and potential application in metal organic chemical vapor deposition

New N‐silver(I) acetylbenzamide complexes of type L_n?AgNC₉H₈O₂ (L = PPh₃; n = 1, 2a; n = 2, 2b; n = 3, 2c; L = P(OEt)₃; n = 1, 2d; n = 2, 2e; n = 3, 2f) were prepared. These complexes were obtained in high yields and characterized by elemental analysis, ¹H NMR, ¹³C{H} NMR, ³¹P{H} NMR and IR spectroscopy, respectively. The molecular structure of 2b has been determined by X‐ray single‐crystal analysis in which the silver atom is in a distorted tetrahedral geometry and crystallizes as cis–trans. New N‐silver(I) acetylbenzamide complexes have a four‐membered ring, which could influence their chemical and physical properties and modulate volatility. Metal organic chemical vapor deposition experiments were carried out successfully at 400°C and 450°C using 2e as precursor for the deposition of silver films, respectively. The high‐purity silver film obtained at 400°C is dense and homogeneous. Copyright © 2012 John Wiley & Sons, Ltd.     

Global existence and time decay estimate of solutions to the Keller–Segel system

We consider the chemotaxis‐Navier–Stokes system 1.1-1.4 (Keller–Segel system) in the whole space, which describes the motion of oxygen‐driven bacteria, eukaryotes, in a fluid. We proved the global existence and time decay estimate of solutions to the Cauchy problem 1.1-1.2 in with the small initial data. Moreover, when the fluid motion is described by the Stokes equations, we established the global weak solutions to 1.3-1.4 in with the potential function ? is small and the initial density n₀(x) has finite mass.     

On cutting sequences of the <Emphasis Type="Italic">L</Emphasis>-shaped translation surface tiled by three squares

We consider a symbolic coding of bi-infinite non periodic geodesics on the L-shaped translation surface tiled by three squares. Each bi-infinite non periodic geodesic is associated with a cutting sequence corresponding to the sequence of labeled saddle connections hit. We prove that there is a relationship between the cutting sequences and the actions of some affine automorphisms of the translation surface. We also get an explicit formula to determine the direction of a bi-infinite non periodic geodesic by using the corresponding cutting sequence.     

The Synthesis and 31P NMR Spectral Studies of Cyclophosphazenes

A modified method for preparing large-scale quantities of pure hexachlorocyclophosphazene (N₃P₃Cl₆) and octachlorocyclotetraphosphazene (N₄P₄Cl₈), phosphorus pentachloride with ammonium chloride, in the presence of zinc chloride, has been developed. The time of the reaction and the quantities of the catalyst are also studied. It is found that the optimum reaction time is 1.5 h and by-products are remarkably reduced by addition of 10% zinc chloride. As indicated by the ³¹ P NMR spectra, the synthesis and separation of cyclophosphazenes can be accomplished in moderate yield of tetramer (39%) and good yield of trimer (83%).     

Thermal stability of phosphorus-containing styrene–acrylic copolymer and its fire retardant performance in waterborne intumescent coatings

Phosphorus-containing styrene–acrylic copolymers are synthesized by free radical seeded emulsion polymerization with the monomers of MMA/St/BA/MAA and phosphorus-containing vinyl monomer (SIPOMER PAM100). The properties of copolymer films are characterized by water adsorption test, thermogravimetry, Fourier transform infrared spectroscopy (FTIR), and energy dispersive spectroscopy (EDS), etc. The copolymer emulsions are used as the binder in an intumescent coatings formulation, and the fire-retardant performances of the coatings are determined by an instrument which the furnace temperature is analoging the cellulose fire temperature. The water adsorption of copolymer film increases remarkably owing to the increasing of phosphoric acid group in the polymer chain. The thermal decomposition stability and thermal-oxidative decomposition stability of the copolymer are improved when PAM100 is introduced into its chain, which is strongly supported by the FTIR and EDS results of copolymer residual treated at different temperature. The EDS results also illustrate that the fire retardancy enhanced by PAM100 during combustion owing to the condensed-phase mechanism. The fire-retardant test results show that the intumescent coatings using StA-P_1.5 copolymer emulsion as the binder obtains the best fire retardant performance. We suggested that StA-P_1.5 presents the lower reactivity with the acid source (APP) in 275–400 °C, and the higher reactivity with APP when the temperature is greater than 500 °C would be benefit for the swelling–charring process and the final fire retardant performance. The exorbitant crosslinking in StA-P₇ brings a negative effect on the fire-retardant performance of intumescent coatings, even if it introduces a densy swollen char layer.