Synthesis and evaluation of nitrated poly(4-hydroxystyrene) microspheres for pH sensing

Lightly crosslinked nitrated poly(4-hydroxystyrene) microspheres were prepared for pH sensing. The first step is to prepare poly(4-acetoxystyrene) microspheres using porous glass membrane emulsification followed by suspension polymerization. The resulting microspheres have diameters between 1 and 2 μm. They hydrolyzed to poly(4-hydroxystyrene) by exposing them to base. This is followed by nitration to nitric acid. The percentage of nitrogen depends on the nitration conditions. Percentages greater than the theoretical percentage for mononitro poly(4-hydroxystyrene) can be obtained at elevated temperatures indicating partial dinitration. These microspheres were cast into hydrogel membranes for use as pH sensors. The membrane is turbid because the refractive index of the microspheres is higher than the hydrogel refractive index. At high pH, deprotonation of the hydroxyl group introduces a negative charge onto the polymer backbone causing it to swell. Swelling is accompanied by a decrease in microsphere refractive index, which is detected as a decrease in membrane turbidity.     

High-pressure selectivity studies--a simple route to a homochiral wistarin precursor

The cycloaddition of spirobutenolide 3 to the homochiral cyclopentadiene 1 at 6.5 kbar leads exclusively to cycloadduct 5. Subsequent Diels-Alder or Michael additions again favour the cyclohexenone double bond; this perfect chemo- regio- and face selectivity was employed for a short and efficient approach to the wistarin framework.     

Structural variations of N-acetylneuraminic acid,part 19: Synthesis of both epimeric pairs of the 4-C-methyl- and 4-deoxy-4-C-methyl- as well as of the β-methylketoside of 4-deoxy-4-C-methylene-N-acetylneuraminic acid

Summary While the reaction of the 4-oxo-Neu 5 Ac derivative2 a with tributoxy methyl zirconate led exclusively to equatorial 4-C-methyl derivative3 a, the analogous reaction with tetramethyl zirconate yielded a 3:2 mixture of both diastereoisomeres3 a and4 a. After removal of protecting groups the 5-acetamido-3,4-dideoxy-4-C-methyl-D-glycero-D-galacto-2-nonulosonic acid5 a and 5-acetamido-3,4-dideoxy-4-C-methyl-D-glycero-D-talo-2-nonulosonic acid6 a were obtained. The 4-C-methylene derivative was prepared by treatment of the same 4-oxo-derivative with CH₂I₂/Zn/Cp ₂ZrCl₂. Subsequent hydrogenation led to both epimeric 4-deoxy-4-C-methyl derivatives8 a and9 a. Final removal of protecting groups gave the 5-acetamido-3,4,5-trideoxy-4-C-methyl-D-glycero-D-galacto-2-nonulosonic acid10 a respectively the 5-acetamido-2,7-anhydro-4-C-methyl-3,4,5-trideoxy-D-glycero-D-talo-2-nonulosonic acid11 a. The -methylketosides of the 4-deoxy-4-C-methyl- (16) and 4-C-methylene-Neu 5 Ac (15) were prepared via the peracetylated derivatives to obtain modell substrates for enzymatic studies. Thus all free acids were tested for inhibition of CMP-sialate synthease. Only the 4-C-methylene compound15 showed most unexpectedly a strong competitive inhibition of this enzyme.

---

Strukturelle Abwandlungen an N-Acetylneuraminsäure, 19. Mitt.: Synthese der beiden Epimerenpaare der 4-C-Methyl- und 4-Deoxy-4-C-methyl- sowie des -Methylketosids der 4-Deoxy-4-C-methylen-N-acetylneuraminsäure. Verhalten gegenüber CMP-Sialat-Synthase

Zusammenfassung Während die Umsetzung des 4-Oxoderivates2 a mit (BuO)₃ MeZr ausschließlich zur equatorialen 4-C-Methylverbindung3 a führt, wurde bei der Reaktion mitMe ₄Zr ein 3:2-Gemisch der beiden Diastereomeren3 a und4 a erhalten. Das 4-C-Methylenderivat7 a wurde durch Reaktion derselben 4-Oxoverbindung mit CH₂I₂/Zn/Cp ₂ZrCl₂ erhalten. Eine anschließende Hydrierung (H₂-Pd/C) führte zu einem trennbaren Germisch der beiden 4-Deoxy-4-C-methylderivative8 a und9 a. Diese Verbindungen konnten durch das Entfernen der Schutzgruppen einerseits in die 5-Acetamido-3,4,5-trideoxy-4-C-methyl-D-glycero-D-galacto-2-nonulosonsäure10 a und 5-Acetamido-2,7-anhydro-4-C-methyl-3,4,5-tridoxy-D-glycero-D-talo-2-nonulosonsäure11 a umgewandelt werden. Die Verbindungen Methyl-5-acetamido-4-C-methylen-3,4,5-trideoxy--D-manno-2-nonulopyranosidonat (15) und Methyl-5-acetemido-4-C-methyl-3,4,5-tridoxy--D-glycero-D-talo-2-nonulopyranosidonat (16) wurden als Modellverbindungen für enzymatische Untersuchungen über peracetylierte Zwischenstufen hergestellt. Überraschenderweise zeigte nur die 4-C-Methylenverbindung15 eine starke kompetitive Hemmung gegenüber CMP-Sialat-Synthase.

     

Photoelectron spectra of cyclopolysilanes

Summary He (I) PE spectra of cyclopentasilane and cyclohexasilane show excellent agreement with STO-3 G + ab initio calculations. The HOMO in both compounds is of (SiSi) 3 p character. First IP's appear at 9.4 and 9.6 eV respectively.

---

Photoelektronenspektren von Cyclopolysilanen (Kurze Mitt.)

Zusammenfassung Die He (I) PE-Spektren der Cyclosilane Si₅H₁₀ und Si₆H₁₂ zeigen ausgezeichnete Übereinstimmung mit STO-3 G + ab initio Rechnungen. Beide Ringe besitzen HOMO's mit (SiSi) 3 p Charakter. Die ersten Ionisierungspotentiale liegen bei 9.4 bzw. 9.6 eV.

     

Critical parameters and optimization of a magnesium-selective liquid membrane electrode for application to human blood serum

Summary The selectivity of a new magnesium ionophore (ETH 7025) induced in membranes of different compositions is experimentally studied in view of the ion activities in human serum. The required selectivity coefficient against calcium for the application of an ion-selective magnesium electrode to human serum is calculated for the worst case. Other critical parameters for the application of a liquid PVC-based ion-selective membrane to undiluted human serum discussed are: the sensor lifetime which is related to the lipophilicity of the carrier as well as the ruggedness of the membrane against interactions with components of the relatively lipophilic sample.     

An SCF study of 10-vertex and 12-vertex boranes and heteroboranes

For symmetry-constrained boranes B₁₀H, B₁₂H, and their valence isoelectronic analogues containing a single hetero atom, completely optimized geometries were obtained using Hartree–Fock SCF calculations with the 3-21G and 6-31G* basis sets. For the anionic and dianionic species, the geometry optimization was also carried out using the 6-31 + G* basis set. Harmonic vibrational frequencies were obtained at HF/3-21G level. The results compare well with experiment where available.     

Synthesis of 2D Germanane (GeH): a New,Fast, and Facile Approach

Germanane (GeH), a germanium analogue of graphane, has recently attracted considerable interest because its remarkable combination of properties makes it an extremely suitable candidate to be used as 2D material for field effect devices, photovoltaics, and photocatalysis. Up to now, the synthesis of GeH has been conducted by substituting Ca by H in a β‐CaGe₂ layered Zintl phase through topochemical deintercalation in aqueous HCl. This reaction is generally slow and takes place over 6 to 14 days. The new and facile protocol presented here allows to synthesize GeH at room temperature in a significantly shorter time (a few minutes), which renders this method highly attractive for technological applications. The GeH produced with this method is highly pure and has a band gap (E_g) close to 1.4 eV, a lower value than that reported for germanane synthesized using HCl, which is promising for incorporation of GeH in solar cells.     

From current peaks to waves and capacitive currents—on the origins of capacitor-like electrode behavior

Terminology of electrodes and electrode materials used in supercapacitors as well as naming of electrode processes and devices prepared with these electrodes is confusing and rather unregulated. Consequently, misunderstanding in communication about research and development is somehow matched with an incomplete understanding of the reasons of the observed capacitive, pseudocapacitive, or Faradaic behavior. Observed and investigated phenomena relevant for supercapacitor electrodes are briefly reviewed and explained in terms of electrode processes and interfacial phenomena. Further research possibly useful in more fundamental understanding and rational improvement of materials is proposed.