Surface and interface properties of thin pentacene and parylene layers

To improve Organic Thin Film Transistor (OTFT) properties we study OTFT semiconductor/dielectric interfacial properties via examination of the gate dielectric using thin Parylene C layer. Structural and morphology properties of pentacene layers deposited on parylene layer and SiO₂/Si substrate structure were compared. The surface morphology was investigated using atomic force microscopy (AFM) and scanning electron microscopy (SEM). AFM topography of pentacene layer in non-contact mode confirmed the preferable pentacene grain formation on parylene surface in dependence on layer thickness. The distribution of chemical species on the surfaces and composition depth profiles were measured by secondary ion mass spectroscopy (SIMS) and surface imaging. The depth profiles of the analyzed structures show a homogenous pentacene layer, characterized with C or C₂ ions. Relatively sharp interface between pentacene and parylene layers was estimated by characteristic increased intensity of CCl ions peak. For revealing the pentacene phases in the structures the Micro-Raman spectroscopy was utilized. Conformal coatings of parylene and pentacene layers without pinholes resulted from the deposition process as was confirmed by SIMS surface imaging. For the pentacene layers thicker than 20 nm, both thin and bulk pentacene phases were detected by Micro-Raman spectroscopy, while for the pentacene layer thickness of 5 and 10 nm the preferable thin phase was detected. The complete characterisation of pentacene layers deposited on SiO₂ and parylene surface revealed that the formation of large grains suggests 3D pentacene growth at parylene layer with small voids between grains and more than one monolayer step growth. The results will be utilized for optimization of the deposition process.      

Effects of the physicochemical properties of titanium dioxide nanoparticles, commonly used as sun protection agents, on microvascular endothelial cells

Until now, the potential effects of titanium dioxide (TiO₂) nanoparticles on endothelial cells are not well understood, despite their already wide usage. Therefore, the present work characterizes six TiO₂ nanoparticle samples in the size range of 19 × 17 to 87 × 13 nm, which are commonly present in sun protection agents with respect to their physicochemical properties (size, shape, ζ-potential, agglomeration, sedimentation, surface coating, and surface area), their interactions with serum proteins and biological impact on human microvascular endothelial cells (relative cellular dehydrogenase activity, adenosine triphosphate content, and monocyte chemoattractant protein-1 release). We observed no association of nanoparticle morphology with the agglomeration and sedimentation behavior and no variations of the ζ-potential (?14 to ?19 mV) in dependence on the surface coating. In general, the impact on endothelial cells was low and only detectable at concentrations of 100 μg/ml. Particles containing a rutile core and having rod-like shape had a stronger effect on cell metabolism than those with anatase core and elliptical shape (relative cellular dehydrogenase activity after 72 h: 60 vs. 90 %). Besides the morphology, the nanoparticle shell constitution was found to influence the metabolic activity of the cells. Upon cellular uptake, the nanoparticles were localized perinuclearly. Considering that in the in vivo situation endothelial cells would come in contact with considerably lower nanoparticle amounts than the lowest-observable adverse effects level (100 μg/ml), TiO₂ nanoparticles can be considered as rather harmless to humans under the investigated conditions.     

Physics of evolution: Selection without fitness

Traditionally evolution is seen as a process where from a pool of possible variations of a population (e.g. biological species or industrial goods) a few variations get selected which survive and proliferate, whereas the others vanish. Survival probabilities and proliferation rates are typically associated with the ‘fitness’ of particular variations. In this paper we argue that the notion of fitness is an a posteriori concept, in the sense that one can assign higher fitness to species that survive but one can generally not derive or predict fitness per se. Proliferation rates can be measured, whereas fitness landscapes, i.e. the inter-dependence of proliferation rates, cannot. For this reason we think that in a physical theory of evolution such notions should be avoided. In this spirit, here we propose a random matrix model of evolution where selection mechanisms are encoded in interaction matrices of species, thereby extending the previous work of ours by a control parameter describing suppressors in the system. We are able to recover some key facts of evolution dynamics endogenously, such as punctuated equilibrium, i.e. the existence of intrinsic large extinction events, and, at the same time, periods of dramatic diversification, as known e.g. from the fossil record. Further, we comment on two fundamental technical problems of a ‘physics of evolution’, the non-closedness of its phase space and the problem of co-evolving boundary conditions, apparent in all systems subject to evolution.     

Stability and equilibrium states

For an infinite dynamical quantum system idealized as aC*-algebra acted upon by time-translations automorphisms in an asymptotically abelian way, we propose to characterize equilibrium states by the three properties of stationarity, stability for local perturbations of the dynamics, and relative purity. We show that a state with these properties either gives rise to a one-sided energy spectrum or is a KMS- (i.e. essentially a limit Gibbs-) state.     

Quality assurance in immunoassay performance—comparison of different enzyme immunoassays for the determination of caffeine in consumer products

Enzyme immunoassays with optical detection are amongst the most widely used bioanalytical tools. We defined seven parameters for the quality assessment of immunoassays that were addressed in a systematic study of direct and indirect immunoassays, using the enzymes horseradish peroxidase (HRP) and alkaline phosphatase (AP), the chromogenic substrates 3,3′,5,5′-tetramethylbenzidine (TMB) and para-nitrophenyl phosphate, and the fluorescent substrates 3-(4-hydroxyphenyl)propionic acid and 4-methylumbelliferyl phosphate. The same monoclonal antibody against caffeine was used throughout the study. The four quality parameters regarding the standard curve were the test midpoint (sensitivity), the measurement range, the relative dynamic range of the signal, and the goodness of fit of the adjusted four-parameter logistic function. All HRP immunoassays showed a higher sensitivity compared to the AP assays. On the basis of all four criteria, it was established that the direct assay format is superior to the indirect format, the immunoassay using HRP TMB fulfilling all requirements best. In a second step, caffeine concentrations in 24 beverage and cosmetics samples were determined and three more quality parameters were assessed with this application. The direct HRP TMB assay showed one of the best intra- and inter-plate precisions and the best accuracy, defined by the correlation of results with those from the chosen reference method liquid chromatography tandem mass spectrometry (LC-MS/MS). Considering all criteria, HRP TMB seems to be the enzyme substrate system of choice preferably used in the direct assay format.

Book review: A.K. Samantara,S. Ratha: Materials Development for Active/Passive Components of a Supercapacitor

Journal of Solid State Electrochemistry -     

Physical boundaries within aggregates – differences between amorphous,para‐crystalline,and crystalline Structures

The structural properties of finely divided inorganic materials such as metal and metalloid oxides, silicates or carbonates of both synthetic and natural origin are compared by means of electron microscopy and tomography. The structure of the outer surfaces of various compact or compacted agglomerates may suggest some striking similarities between various amorphous silica on the one hand and crystalline titania and alumina on the other however the details of the interior fine structure are completely different. Inside of the crystalline aggregates of, for example, alumina and titania distinct grain boundaries between the inter‐grown primary crystallites exist. Also physical boundaries between different solid phases and crystalline/amorphous transitions in core/shell structures can occur. No physical grain or phase boundaries were found inside of synthetic amorphous silica or para‐crystalline carbon black thus, the aggregate is the constituent particle. Synthetic amorphous silica from different production technologies (fumed/pyrogenic, precipitated, aerogel, gel) may exhibit different macro‐morphology but distinct similarities of the amorphous silica networks. Computational studies on silica and titania underline the stability of constituent particles and aggregates as observed by means of TEM after dispersing the original materials by ultra‐sonication.