Determination of Pesticide Ethion by Linear Sweep Stripping Voltammetry

IntroductionOrganophosphorus pesticides( OPPs) are widelyused in agriculture as insecticides, but they are foundto contaminate agricultural products such as fruits andvegetables to variable extents. Because of their toxicproperties[1,2]and the potential r…     

Influence of electronic and steric effects on stability constants and electrochemical reversibility of divalent ion complexes with glycine and sarcosine. A glass electrode potentiometric, sampled direct current polarographic, virtual potentiometric, and molecular modelling study

Cd^II complexes with glycine (gly) and sarcosine (sar) were studied by glass electrode potentiometry, direct current polarography, virtual potentiometry, and molecular modelling. The electrochemically reversible Cd^II–glycine–OH labile system was best described by a model consisting of M(HL), ML, ML₂, ML₃, ML(OH) and ML₂(OH) (M = Cd^II, L = gly) with the overall stability constants, as log β, determined to be 10.30 ± 0.05, 4.21 ± 0.03, 7.30 ± 0.05, 9.84 ± 0.04, 8.9 ± 0.1, and 10.75 ± 0.10, respectively. In case of the electrochemically quasi-reversible Cd^II–sarcosine–OH labile system, only ML, ML₂ and ML₃ (M = Cd^II, L = sar) were found and their stability constants, as log β, were determined to be 3.80 ± 0.03, 6.91 ± 0.07, and 8.9 ± 0.4, respectively. Stability constants for the ML complexes, the prime focus of this work, were thus established with an uncertainty smaller than 0.05 log units. The observed departure from electrochemical reversibility for the Cd–sarcosine–OH system was attributed mainly to the decrease in the transfer coefficient . The MM2 force field, supplemented by additional parameters, reproduced the reported crystal structures of diaqua-bis(glycinato-O,N)nickel(II) and fac-tri(glycinato)-nickelate(II) very well. These parameters were used to predict structures of all possible isomers of (i) [Ni(H₂O)₄(gly)]⁺ and [Ni(H₂O)₄(sar)]⁺; and (ii) [Ni(H₂O)₃(IDA)] and [Ni(H₂O)₃(MIDA)] (IDA = iminodiacetic acid, MIDA = N-methyl iminodiacetic acid) by molecular mechanics/simulated annealing methods. The change in strain energy, ΔU_str, that accompanies the substitution of one ligand by another (ML + L′ → ML′ + L), was computed and a strain energy ΔU_str = +0.28 kcal mol⁻¹ for the reaction [Ni(H₂O)₄(gly)]⁺ + sar → [Ni(H₂O)₄(sar)]⁺ + gly was found. This predicts the monoglycine complex to be marginally more stable. By contrast, for the reaction [Ni(H₂O)₃IDA] + MIDA → [Ni(H₂O)₃MIDA] + IDA, ΔU_str = −0.64 kcal mol⁻¹, and the monoMIDA complex is predicted to be more stable. This correlates well with (i) stability constants for Cd–gly and Cd–sar reported here; and (ii) known stability constants of ML complex for glycine, sarcosine, IDA, and MIDA.     

Pickering emulsions with stimulable particles: from highly- to weakly-covered interfaces

We study oil-in-water emulsions stabilised by pH-sensitive colloidal silica or latex particles. Depending on the composition of the continuous phase, the same type of particles and the same emulsification process lead to emulsions characterised either by large drops densely covered by the particles, or to small droplets which are weakly covered. The two kinetically stable states can be tuned reversibly by using pH or salinity as compositional stimuli. We examine the emulsions' behaviour in these two limiting cases and we discuss the possible mechanisms allowing stabilisation, especially in the case of low surface coverage.     

Fluorenyl-containing sulfonated poly(aryl ether ether ketone ketone)s (SPFEEKK) for fuel cell applications

A series of fluorenyl-containing sulfonated poly(aryl ether ether ketone ketone)s (SPFEEKK) were synthesized via aromatic nucleophilic substitution polymerization. The sulfonation content (SC) was controlled by the feed ratios of sulfonated and nonsulfonated monomers. Flexible and strong membranes in the sulfonic acid form were obtained from cast membranes in the sodium salt forms by treatment with acid. The thermal properties, water uptake, swelling ratio, water state, oxidative stability, proton conductivity and methanol permeability were investigated. All the polymers had proton conductivities greater than 1 × 10⁻² S/cm at room temperature, and the conductivity values of m-SPFEEKK-80 and p-SPFEEKK-80 were up to 1.86 × 10⁻¹ and 1.78 × 10⁻¹ S/cm at 100 °C. This series of polymers also possessed good dimensional stability in water and low methanol crossover.     

Monitoring the formation of TTF dimers by Na+ complexation

The formation of the two dimeric species [(TTF)2]+* and (TTF+*)2 can be monitored by complexation of Na+ on a calix[4]arene-TTF assembly.     

Production and reactions of organic-soluble lanthanide complexes of the monolacunary Dawson [alpha1-P2W17O61]10- polyoxotungstate

The incorporation of lanthanides into polyoxometalates provides entry to new classes of potentially useful materials that combine the intrinsic properties of both constituents. To utilize the [alpha1-Ln(H2O)4P2W17O61]7- species in applications of catalysis and development of luminescent materials, the chemistry of this family of lanthanide polyoxometalates in organic solvents has been developed. Organic-soluble polyoxometalate-lanthanide complexes TBA5H2[alpha1-Ln(H2O)4P2W17O61] (Ln = La(III), Sm(III), Eu(III), Yb(III)) were prepared and characterized by elemental analysis, acid-base titration, IR, 31P NMR, and mass spectrometry. The synthetic procedure involves a cation metathesis reaction in aqueous solution under strict pH control. A solid-liquid-phase transfer protocol yielded a unique species (TBA)8K3[Yb(alpha1-YbP2W17O61)2] with three ytterbium ions and two [alpha1-P2W17O61]10- polyoxotungstates. A centrosymmetric dimeric complex [{alpha1-La(H2O)4P2W17O61}2]14- was crystallized from aqueous solution and characterized by X-ray diffraction. ESI mass spectral analysis of the complexes TBA5H2[alpha1-Ln(H2O)4P2W17O61] shows that similar dimers exist in organic solution, in particular for the early lanthanides. Fragmentation in the mass spectrometer of the complexes from dry acetonitrile solution involves double protonation of an oxo ligand and loss of one water molecule. Low mass tungstate fragments combine into [(WO3)n]2- (n = 1-5) ions and their condensation products with phosphate. Reaction of TBA5H2[alpha1-Eu(H2O)4P2W17O61] with 1,10-phenanthroline or 2,2'-bipyridine showed an increase of the europium luminescence. This result is explained by the formation of a ternary complex of [alpha1-Eu(H2O)4P2W17O61]7- and two sensitizing ligands.     

The effect of inhomogeneous stickiness on polymer aggregation

The aggregation of polymers is important in the formation of marine aggregates and the vertical transport of material in the ocean. A polymer may be inhomogeneous along its length, with associating groups at some points along its length where bonds are more likely to form. In this paper we investigate the effects of inhomogeneous 'stickiness' along the polymer length. We describe the results of three-dimensional off-lattice simulations of polymer-polymer aggregation for four different types of polymer: polymers which are sticky along their entire length, polymers which are sticky at the ends only and two types of polymer which are slightly sticky along their entire length. We examine the mean radius of gyration and the fractal dimension of the resulting aggregates and the dynamics of aggregation. The slightly sticky polymers and the polymers which are sticky only at the ends form aggregates with a higher fractal dimension than the polymers which are sticky along their entire length. However, the mean radius of gyration of the aggregates formed by polymers which are sticky only at the ends is significantly larger than that of the aggregates formed from slightly sticky polymers. The aggregation dynamics are also different for the polymers which are sticky only at the ends compared to the slightly sticky polymers. A single 'stickiness value' is therefore likely to be inadequate to describe a polymer. We also examine the effect of polymer rigidity; it seems that the effect of inhomogeneous stickiness is greater for almost-straight polymers than for coiled chains.     

Structure and diffusion characterization of SBA-15 materials

In situ formation of the micro- and mesoporous structures of SBA-15 materials was investigated. It was found that the structure is significantly different from that for cylindrical or hexagonal pores, which suggests that the SBA-15 is more complex than an array of hexagonally ordered channels. Nitrogen adsorption isotherms at 77 K provided evidence that large (primary) mesopores are accompanied by a certain amount of significantly smaller pores with a broad distribution in the micropore/small-mesopore range within the mesoporous walls of main channels. It was found that the microporosity can be controlled by the time of heating as well as the synthesis temperature. The diffusion properties of n-heptane as a probe molecule in four selected SBA-15 samples with different micropore volumes were studied by the standard zero length column technique and related to their structural characteristics. The results have shown that the diffusion process involving n-heptane at a low concentration level takes place inside the walls of main mesoporous channels and depends on the relative content of micropores. In the samples that have a relatively high content of micropores, n-heptane diffusivities are relatively low, their activation energies are high, and the process is similar to diffusion in typical microporous adsorbents, like zeolites. As the micropore content is decreased, diffusion becomes more and more controlled by secondary mesopores of the intrawall pore structure, rendering diffusion faster and activation energies lower.     

Novel RPLC stationary phases for lipophilicity measurement: solvatochromic analysis of retention mechanisms for neutral and basic compounds

An RPLC was developed to rapidly determine lipophilicity of neutral and basic compounds using three base deactivated RPLC stationary phases particularly designed for the analysis of basic compounds, namely, Supelcosil ABZ(+)Plus, Discovery RP Amide C16, and Zorbax Extend C18. The work consisted of three sets of experiments. In the first log kw values of neutral compounds were extrapolated using hydroorganic mobile phases at different compositions. Good correlation between log kw and log Poct indicated that the method was appropriate for these supports, without adding a silanol masking agent. In the second set of experiments, isocratic log k values of neutral and basic compounds were measured with three different mobile phases. The best estimation of lipophilicity was obtained for neutral and basic compounds when the secondary interactions were strongly reduced (i. e., when basic compounds were under their neutral form). In the third set of experiments, isocratic retention factors of basic compounds (in their neutral form) were measured with a high-pH mobile phase, on a chemically stable support (Zorbax Extend C18). Under these chromatographic conditions, correlation between the isocratic retention factors and log Poct (log D10.5) for basic compounds was similar to that for neutral compounds.     

Traceability in quantitative NMR using an electronic signal as working standard

The choice of the reference, either as internal or external is not straightforward in quantitative NMR. In this context ERETIC™ methodology appears as an universal referencing technique. An electronic signal, generated by the NMR spectrometer during the acquisition time, operates as a virtual working standard. The processes for ensuring a traceability to primary standards is illustrated on the official method devoted to (D/H)_i ratios measurement on ethanol, using quantitative ²H-NMR. The ERETIC approach is shown to be equivalent to its official homologue, in terms of accuracy and precision. Finally, its performance could be beneficial to other analytes, matrices and nuclei.