Regioselective homogeneous hydrogenation of heteroaromatic nitrogen compounds by use of [RuH(CO)(NCMe)2(PPh3)2]BF4 as the precatalyst

Summary The complex [RuH(CO)(NCMe)₂(PPh₃)₂]BF₄ (1) is an efficient and regioselective catalyst precursor for the hydrogenation of polyaromatic nitrogen compounds such as quinoline (Q), isoquinoline (iQ), indole (ln), 5,6- and 7,8-benzoquinoline (BQ) and acridine (A) under relatively mild reaction conditions (125 °C, 4 atm H₂). The order of individual initial rates was: A > Q > 5,6-BQ > 7,8-BQ > ln > iQ, reflecting both steric and electronic effects. For the regioselective homogeneous hydrogenation of A to 9,10-dihydroacridine (DHA) catalysed by complex (1), a kinetic study was carried out; the experimentally determined rate law was r = k ₁ [Ru] [H₂]. These findings are consistent with a mechanism involving the hydrogenation of [RuH(CO)(A)(NCMe)(PPh₃)₂]BF₄ to yield DHA and the unsaturated species [RuH(CO)(NCMe)(PPh₃)₂]BF₄ in the rate-determining step.     

Surface Energy of Silica-TEOS-PDMS Ormosils

Inverse gas chromatography (IGC) was applied to characterize the surface energy of organically modified silicates (ormosils) by measuring the interaction of molecular organic probes with the ormosil surface. Ormosils were prepared by the sol-gel method by the reaction of TEOS (tetraethoxysilane), PDMS (polydimethylsiloxane) and different types of silica (Aerosil 130, Aerosil 200 and Aerosil 380). The isosteric heat of adsorption, q _st, and the dispersive component of the surface energy, _s ^D, were estimated by using the retention volume of different nonpolar and polar probes at infinite dilution. The dispersive component shows an increase as the specific surface area of the silica is increased from 29.6 mJ/m² to 51.4 mJ/m² at 60°C. Such values are lower than that obtained for aerosil particles meaning that PDMS chains impede the interaction with silanol groups located on the silica surface. The specific interaction parameter, I^SP, and the enthalpy of specific adsorption, H _a ^SP, of polar probes on the ormosil surface were also measured in order to obtain the acid-base character of ormosil surface. The H _a ^SP, was correlated with the donor, DN, and the acceptor, AN, numbers of the probes to quantify the acidic, K _A, and the basic, K _B, parameters of the substrate surface. The obtained results suggest that the silica particles were covered by PDMS chains in a different way depending on the type of silica used. The values of K _A and K _B suggest that the ormosil surface is amphoteric, with predominantly acceptor electron sites.     

A theoretical study on the low-lying excited states of 2,2':5',2'-terthiophene and 2,2':5',2':5',2'-quaterthiophene.

The nature and properties of the low-lying singlet and triplet valence excited states of 2,2':5',2'-terthiophene (terthiophene) and 2,2':5',2':5',2'-quaterthiophene (tetrathiophene) are discussed on the basis of high-level ab initio computations. The spectroscopic features determined experimentally for short alpha-oligothiophenes are rationalised on theoretical grounds. Special attention is devoted to the nonradiative decay process through intersystem crossing (ISC) from the singlet to the triplet manifold, which is known to be relatively less efficient in tetrathiophene. Along the geometry relaxation of the S1 state of terthiophene, the S1 and T2 states become degenerate, which leads to a favourable situation for the occurrence of ISC. The parallel process is expected to be less favoured in tetrathiophene because of the less efficient spin-orbit coupling and the increase of the S1-T2 energy gap.     

(Z)-3-p-tolylsulfinylacrylonitrile as a chiral dienophile: diels-alder reactions with furan and acyclic dienes

The behavior of (Z)-3-p-tolylsulfinylacrylonitrile (1) as a chiral dienophile has been evaluated from its reactions with furan and acyclic dienes. Electrostatic interactions of the cyano group with the sulfinyl one restrict the conformational mobility around the C-S bond, thus controlling the pi-facial selectivity, which is almost complete in all cases, the approach of the diene from the less-hindered face of the dienophile (that bearing the lone electron pair) in the predominant rotamer being the favored one. The regioselectivity is also completely controlled by the cyano group. Additionally, the reactivity of compound 1 as well as its endo-selectivity are both higher than those observed for the corresponding (Z)-3-sulfinylacrylates, thus proving the potential of sulfinylnitriles as chiral dienophiles.     

Effect of chloride on heavy metal mobility of harbour sediments

To evaluate the environmental impact of polluted sediments, several operationally defined sequential extraction procedures (SEPs) have been described. Salinity has long been recognised as an important variable determining the physicochemical behaviour of heavy metals in marine sediments. Thus, in the present paper, the modified BCR-SEP has been applied to harbour sediments in order to assess to what extent trace metal mobility (Cd, Cr, Cu, Ni, Pb and Zn) could be influenced by chloride content in sediments. For this, washed (W) and non-washed (NW) sediments were compared. The relative mobility order observed for the six trace metals studied was not seen to be influenced by the presence of chloride in the sediments, but an increase of mobility was observed for Cd and Zn (the most mobile metals) when chloride was present in the sediments. Characterisation of the sediments and of the pseudo-total metal contents by means of an aqua regia extraction was also assessed.     

Excess magnitudes for the benzene + n-dodecane system at 298.15 and 323.15 K

The vapor pressures for benzene + n-dodecane mixtures have been measured using a static apparatus. Values for the excess Gibbs energy have been calculated using a modified form of Barker's method and fitted to a Padé approximant equation. Selection of the most adequate approximant is made according to objective criteria. The results are compared with those corresponding to other benzene + n-alkane systems. The values for the activity coefficient of benzene at infinite dilution calculated from these data agrees very well with the values obtained by gas-liquid chromatography.     

Analysis by DSC of the drying and sintering processes of alkoxide-derived SiO2–ZrO2 gels

The drying and sintering processes of SiO₂–ZrO₂ alkoxide-derived gels have been studied by means of DSC technique. In the drying process, most part of water and alcohols are removed from the gels. For the SiO₂ gel such elimination occurs at the end of the drying process, however for the ZrO₂ gel this elimination occurs during the whole drying time. An intermediate behavior is observed for the binary system SiO₂–ZrO₂ gels. In the sintering process, the DSC technique allows to determine the elimination of water and alcohols retained within the structure (open or close pores) and the well-known hydroxyl condensation of silica gel between 700° and 800°C is also observed. The ZrO₂ gel shows the final hydroxyl condensation at the heating temperature of 600°C. For the binary SiO₂–ZrO₂ gels, the hydroxyl condensation has been associated to the activation energy needed for the dissociation of silica hydroxyls. This energy decreases with the ZrO₂ concentration in the gel resulting in a sintering treatment of 500°C leading to the entire hydroxyl condensation for the gel with 75% ZrO₂–25% SiO₂.

By studying the temperature of the DSC peaks, it is possible to know the temperature at which most part of water and alcohols are leaving the gel, and these results can be used in order to select the corresponding drying or sintering schedules for obtaining a well-fabricated material.     

Optical response of bimetallic Li x Na8−x (0≦x≦8) and of doped Na8Zn clusters

Total (elastic + inelastic) cross-sections for electron scattering from C, N, O atoms and their simple molecules are studied theoretically. Thee ^–-C, N, O atomic calculations are done in the complex optical potential approach. To study the electron scattering from O₂, N₂, CO, NO, CN, C₂ as well as CO₂, N₂O, NO₂ O₃ targets, we have adopted an additivity rule, wherein the molecular cross-section is an incoherent sum of the cross-sections of the constituent atoms. The cross-sections of C, N & O atoms are presented at incident energiesE _i =10–1000 eV, the molecular cross-sections are presented atE _i =100–1000 eV. The reliability of the additivity rule is discussed against the background of experimental data.     

Group 6 heteroatom- and non-heteroatom-stabilized carbene complexes. beta,beta'- and alpha,beta,beta'-annulation reactions of cyclic enamines

Cyclization reactions of group 6 Fischer carbene complexes with cyclopentanone and cyclohexanone enamines are described. Enamine 3a undergoes thermal alpha,beta,beta'-annulation with alkenylcarbene complexes 1 and 2 (THF, 60 degrees C), affording semibullvalenes 5. The metalate intermediates 6, resulting from beta,beta'-annulation of the enamines 3a and 4a, were quantitatively formed by running the reaction in hexane at room temperature. Acid-promoted demetalation of 6 afforded endo-2-bicyclo[3.2.1]octen-8-ones 7 and endo/exo-2-bicyclo[3.3.1]nonen-9-ones 8 (endo/exo = 5:1). Using (S)-methoxymethylpyrrolidine-derived enamines 3b and 4b,c allowed highly enantioenriched cycloadducts endo-(+)-7 as well as endo-(-)-8 and exo-(-)-8 to be accessed. The non-heteroatom-stabilized carbene complex 10 was formed from complex 6 by Me(3)SiOTf-promoted elimination of the methoxy group, characterized by (13)C NMR, and transformed into the organic compounds 7, 7-d, and 11 as well as into bicyclo[3.2.1]octan-2,8-diones 14 and cycloheptanones 15. On the basis of this sequence, enantioenriched cycloheptanones (+)-15 were efficiently prepared in one pot from carbene complexes 2 and enamine 3b (51-55% yield, 91-96% ee). Extension of this work to simple Fischer carbene complexes 16 allowed an appropriate way to generate the nonstabilized pentacarbonyl[(phenyl(alkyl)carbene]tungsten complex 17 to be designed, for which the thermal and chemical behavior leading to compounds 18-21 is described.     

Preparation of candidate certified reference materials for the quality control of EDTA-and acetic acid-extractable trace metal determinations in sewage sludge-amended soil and terra rossa soil

The determination of extractable trace metal contents in soil using single extraction procedures is currently performed in many laboratories to assess the bioavailable metal fraction (and related phytotoxic effects) and the accessability to the environment (e.g. contamination of ground waters). Owing to the need for validation of the extraction schemes used and of the analytical techniques, the EC Measurements and Testing Programme (formerly BCR) has organized a project for improving the quality of determination of extractable trace metal contents in soil, the first step being an interlaboratory study to adopt common extraction procedures and the second being a certification campaign to certify two soils for their extractable trace element contents following these procedures. This paper gives a brief overview of the project organisation and describes the preparation, homogeneity and stability studies of two soil candidate reference materials (sewage sludge-amended and terra rossa soils).