Ferroelectric liquid crystals induced by dopants with axially chiral 2,2'-spirobiindan-1,1'-dione cores: diether vs. diester side-chains

A series of axially chiral 5,5'- and 6,6'-dialkanoyloxy-2,2'-spirobiindan-1,1'-dione dopants, (R)-2 and (R)-4a-4c were synthesized in optically pure form and their ferroelectric polarization powers, δ_p, measured in four liquid crystal hosts with isotropic (I)-nematic (N)-smectic A (SmA)-smectic C (SmC) phase sequences. The results show that the sign of polarization P _S induced by (R)-2 and (R)-4a-4c follows the same trend as that previously reported for the 5,5'- and 6,6'-diheptyloxy-2,2'-spirobiindan-1,1'-dione dopants, (R)-1 and (R)-3. The polarization induced by (R)-2 in the host DFT is below detection limits, and the sign of P _S was found to invert as a function of temperature at mole fractions as low as 0.01. On the other hand, the polarization power of the 6,6'-diheptanoyloxy dopant (R)-4b in the host NCB76 is -1449 nC cm^-2, the fourth highest value reported so far, and more than three times the δ_p value of the 5,5'-diheptanoyloxy analogue (R)-2 in that host (+474 nC cm^-2). Results of ²H NMR experiments suggest that (R)-4b exerts stronger local perturbations in NCB76 than (R)-2, and that these perturbations may be chiral in nature.     

Protein-based radicals in the catalase-peroxidase of synechocystis PCC6803: a multifrequency EPR investigation of wild-type and variants on the environment of the heme active site

Catalase-peroxidases are bifunctional heme enzymes with a high structural homology to peroxidases from prokaryotic origin and a catalatic activity comparable to monofunctional catalases. These unique features of catalase-peroxidases make them good systems to study and understand the role of alternative electron pathways both in catalases and peroxidases. In particular, it is of interest to study the poorly understood role of tyrosyl and tryptophanyl radicals as alternative cofactors in the catalytic cycle of catalases and peroxidases. In this work, we have used a powerful combination of multifrequency EPR spectroscopy, isotopic labeling of tryptophan and tyrosine residues, and site-directed mutagenesis to unequivocally identify the reactive intermediates formed by the wild-type Synechocystis PCC6803 catalase-peroxidase. Selected variants of the heme distal and proximal sides of the Synechocystis enzyme were investigated. Variants on the aromatic residues of the short stretch located relatively close to the heme and spanning the distal and proximal sides were also investigated. In the wild-type enzyme, the EPR signal of the catalases and peroxidases (typical) Compound I intermediate [Fe(IV)=O por.+] was observed. Two protein-based radical intermediates were also detected and identified as a Tyr. and a Trp. . The site of Trp. is proposed to be Trp 106, a residue belonging to the conserved short stretch in catalase-peroxidases and located at a 7-8 A distance to the heme propionate groups. An extensive hydrogen-bonding network on the heme distal side, involving Trp122, His123, Arg119, seven structural waters, the heme 6-propionate group, and Trp106, is proposed to have a key role on the formation of the tryptophanyl radical. We used high-field EPR spectroscopy (95-285 GHz) to resolve the g-anisotropy of the protein-based radicals in Synechocystis catalase-peroxidase. The broad gx component of the HF EPR spectrum of the Tyr. in Synechocystis catalase-peroxidase was consistent with a distributed electropositive protein environment to the tyrosyl radical.     

Fragmentation of protonated thioether conjugates of acrolein using low collision energies

The protonated mercapturic acid conjugate of acrolein, S-(3-oxopropyl)-N-acetyl-L-cysteine (I), undergoes facile retro-Michael loss of acrolein in the gas phase. To determine whether extensive loss of acrolein would impede structural characterization of acrolein-peptide adducts, fragmentation reactions of a series of conjugates, formed by 1,4-Michael addition of acrolein to peptides and cysteine derivatives, were investigated at collision cell potentials up to ?50 V using a triple quadrupole mass spectrometer. Differences in fragmentation dynamics suggest protonation at the sulfur of the N-acetylcysteine conjugate I facilitates retro-Michael elimination of acrolein with a low activation energy relative to other fragmentations. Analogous fragmentation was eliminated after borohydride reduction of the aldehyde to an alcohol. Retro-Michael fragmentation was not significant for acrolein conjugates of glutathione derivatives, suggesting that proton sequestration occurs in peptides with multiple amide linkages even when the peptide does not contain a basic amino group. An unexpected outcome of these experiments was the observation of a facile gas-phase cleavage of peptides on the N-terminal side of S-(3-oxopropyl)cysteine residues. Such fragmentation behavior may prove useful for locating cysteine residues in peptides.     

Arylidene imidazothiazoles. Synthesis,structure and benzodiazepine receptor binding

A series of arylidene imidazo[2,1-b]thiazoles was synthesized, in order to investigate the influence of different spatial arrangements of the arylidene substituent towards the bicyclic structure of imidazo[2,1-b]-thiazole on benzodiazepine receptor affinity. 1,2- And 2,3-cyclized derivatives of mono- and di-substituted Z-5-arylidene-2-thiohydantoins were investigated. As an example of E isomers E-5-benzylidene-2,3-dihydroimidazo[2,1-b]thiazol-6(5H)-one was obtained. The spatial arrangement of the arylidene sub stituent toward the bicyclic structure as well as the character of isomers had little influence on the benzo diazepine receptor affinity of the compounds. It seems that the greatest influence on biological activity has the nature and the number of substituents on the phenyl ring. All investigated imidazo[2,1-b]thiazoles were less active than previously described arylidene imidazo[2,1-b]thiazepinones.     

Nanodiscs for INPHARMA NMR Characterization of GPCRs: Ligand Binding to the Human A2A Adenosine Receptor

G-protein-coupled-receptors (GPCRs) are of fundamental importance for signal transduction through cell membranes. This makes them important drug targets, but structure-based drug design (SBDD) is still hampered by the limitations for structure determination of unmodified GPCRs. We show that the interligand NOEs for pharmacophore mapping (INPHARMA) method can provide valuable information on ligand poses inside the binding site of the unmodified human A_2A adenosine receptor reconstituted in nanodiscs. By comparing experimental INPHARMA spectra with back-calculated spectra based on ligand poses obtained from molecular dynamics simulations, a complex structure for A_2AR with the low-affinity ligand 3-pyrrolidin-1-ylquinoxalin-2-amine was determined based on the X-ray structure of ligand ZM-241,358 in complex with a modified A_2AR.     

Noncovalent functionalization of boron nitride nanotubes using poly(2,7-carbazole)s

To fully actualize the potential of boron nitride nanotubes (BNNTs), it is necessary to overcome the inherent insolubility of this nanomaterial. Drawing on the successes realized in the analogous carbon nanotube field, noncovalent functionalization with conjugated polymers offers a simple, scalable route toward the production of stable dispersions of BNNTs. 2,7-carbazoles were chosen as our core monomer based on density functional theory (DFT) predictions, which suggest superior interactions with BNNTs when compared to fluorene-BNNT interactions. Homo poly(2,7-carbazole)s and copolymers with fluorenes were synthesized and used successfully to disperse BNNTs into organic solvents. Thermogravimetric analysis and atomic force microscopy results confirm the proficiency of these polymers to disperse large amounts (> 80% by weight) of individualized BNNTs. Analysis of absorbance data shows that the choice of solvent is critical, with stability enhanced in THF compared to CHCl₃ due to the more efficient planarization of polymer chains on the surface of BNNTs, particularly for the homopolymers. The utility of these highly-soluble poly(2,7-carbazole)-BNNT complexes for printed electronics and transparent composites was demonstrated by the fabrication of simple capacitors and incorporation into poly(methyl methacrylate) composites, respectively.     

Large‐volume sample stacking with polarity switching for monitoring of nucleotide pyrophosphatase/phosphodiesterase 1 (NPP1) reactions by capillary electrophoresis

Nucleotide pyrophosphatase/phosphodiesterase 1 (NPP1) is a membrane glycoprotein involved in the hydrolysis of extracellular nucleotides. Its main substrate is ATP yielding AMP and pyrophosphate. NPP1 has been proposed as a novel drug target, for diabetes type 2 and the treatment of calcium pyrophosphate dihydrate deposition disease leading to inflammatory arthritis. The monitoring of NPP1 reactions is difficult because its velocity is very slow requiring highly sensitive analytical procedures. In this study, a method of large‐volume sample stacking with polarity switching was developed, and separations were optimized. Large sample volumes were loaded by hydrodynamic injection (5 psi, 13 s) followed by removal of a large plug of sample matrix from the capillary using polarity switching (?10 kV). The stacked analytes were subsequently separated in phosphate buffer (100 mM, pH 9.2) at 20 kV. The validated method was found to be linear (R² = 0.9927) in the concentration range of 0.05–50 μM of AMP, with high accuracy and precision. The determined LOD and LOQ of AMP were 18 nM and 60 nM, respectively. Compared to a previously reported CE procedure using sweeping technique, a fivefold improvement of sensitivity was achieved. Moreover, the new technique was faster, and reproducibility of migration times was improved (RSD value = 1.2%). Importantly, adenine nucleotide analogs and derivatives tested as NPP1 inhibitors could be completely separated from the substrate ATP and the enzymatic product AMP. The method was applied to NPP1 inhibition assays investigating nucleotide‐derived inhibitors in the presence of ATP.