Reclaiming of ground rubber tire (GRT) by a novel reclaiming agent

The present paper describes the mechanical reclaiming of ground rubber tire (GRT) by tetra methyl thiuram disulfide (TMTD), a multi-functional reclaiming agent. The versatility of the proposed agent is that it acts as a reclaiming agent during reclaiming and as a curing agent during revulcanization of the reclaimed sample. Reclaiming of GRT was carried out on an open two roll mixing mill at various time intervals and different concentrations of the reclaiming agent (TMTD). The degree of reclaiming was evaluated by measurement of the gel content, inherent viscosity of sol rubber, Mooney viscosity of the reclaimed rubber, crosslink density, swelling ratio and molecular weight between two crosslink bonds as a function of milling time. Also, the influence of the gel content on crosslink density at various time intervals on the open two roll mixing mill was determined. A unique correlation between gel fraction and crosslink density obtained at various time intervals and concentrations of reclaiming agent indicated that an optimization of the concentration of TMTD and milling time has a positive influence on improving the efficiency of reclaiming. The reclaiming conditions have been optimized in view of the mechanical properties of the revulcanized GRT and the aging resistance properties of the revulcanized reclaim. The influence of the concentration of sulfur on the mechanical properties in the revulcanized reclaim was also studied. Scanning electron microscopy (SEM) studies further indicate the coherency and homogeneity in the revulcanized reclaim rubber when reclamation is carried out by optimum concentration of TMTD after maximum time of reclaiming.     

Mass transfer of a neutral solute in polyelectrolyte grafted soft nanochannel with porous wall

A soft nanochannel involves a soft interface that contains a polyelectrolyte layer (PEL) sandwiched between a rigid surface and a bulk electrolyte solution. Mass transfer of a neutral solute in a combined electroosmotic and pressure driven flow through a polyelectrolyte grafted charged nanochannel with porous wall is presented in this work. Assuming the PEL as fixed charged layer and PEL-electrolyte interface as a semi-penetrable membrane, analytical solutions were obtained for potential distributions (for small wall potential). Velocity profiles were also derived in the same domains, for both inside and outside the PEL. Convective-diffusive species balance equation was semi-analytically solved inside the PEL. Expression of length averaged Sherwood number was also obtained and effects of different parameters, namely, drag parameter (α), Debye parameter , and PEL thickness were studied in detail. The variation of permeate concentration and permeation flux across the porous wall was obtained.     

Upper bounds on the fine structure constant and on nucleon magnetic moments in terms of Compton scattering cross sections

We derive and compare with experimental data the bound

$\text{α??λm}{}_{\mathrm{<mtext>p</mtext>}}\text{?m}{}_{\mathrm{<mtext>p</mtext>}}\text{ν}{}^2{}_1\text{2π}{}^2\text{∫}\text{ν}{}_0\text{∞}\text{d}\text{ν′σ}{}_{\mathrm{<mtext>tot</mtext>}}\text{(ν′)}\text{(ν′}{}^2\text{+ν}{}^2{}_1\text{)}\text{+2πm}{}_{\mathrm{<mtext>p</mtext>}}\text{∫}\text{ν}{}_0\text{∞}\text{ν′}{}^2\text{d}\text{ν′σ}{}_{\mathrm{<mtext>tot</mtext>}}\text{(ν′)}\text{(ν′}{}^2\text{+ν}{}^2{}_1\text{){ν′}{}^2\text{(}\text{d}\text{σ}\text{d}\text{t)}{}_0\text{+πλ}{}^2\text{+2ν′|λ|}\text{π}\text{(}\text{d}\text{σ}\text{d}\text{t)}{}_0\text{?}\text{σ}{}^2{}_{\mathrm{<mtext>tot</mtext>}}\text{16π}\text{}}{}^{\mathrm{?1}}$

, where α is the fine-structure constant, m_p the proton mass, ν₀ the photo-pion production threshold, σ_tot and $\text{(}\text{d}\text{σ}\text{d}\text{t}\text{)}{}_0$ are the unpolarized total hadronic photo-absorption cross section on protons and the unpolarized forward differential cross section for proton Compton scattering at photon-lab energy ν′, and λ and ν₁ are any real numbers. We derive similar bounds on proton and neutron magnetic moments.     

Gluino and squark search at Tevatron collider energies

Event rates and distributions for high mass gluinos and squarks are computed at Tevatron collider energies, imposing experimentally realisticP _T cuts. Gluino and squark masses can be probed up to 200 GeV at \(\sqrt s = 2 TeV\) , and up to about 150 GeV at \(\sqrt s = 1.6 TeV\) with the supersymmetric signal being much more enhanced relative to the standard model background than at CERN \(\bar p\) energies. If the CERN UA1 missing-p _T events are indeed indicative for the existence of gluinos and/or squarks with masses of about 50–70 GeV, then the Fermilab collider experiments should easily confirm the expected huge supersymmetric signals.     

A Comparative study of p-Em and C12-Em interactions at 4·5 GeV/c per nucleon

In this paper we present a comparative study of inelastic interactions of C¹²-Em and p-Em at 4·5 GeV/c per nucleon. The multiplicity distributions and their correlations have been studied. The results show a strong correlation of n _s onn _h in the case of C¹²-Em but not in the case of p-Em. It is also shown that the n _s increases with the increase of the projectile mass. The angular distribution of the target fragments in C¹²-Em shows a massive forward collimation. Comparison is also made in the pseudorapidity distribution of both C¹²-Em and p-Em, the result shows many interesting features.     

Metal complexes of pyrimidine derived ligands – Syntheses,characterization and X-ray crystal structures of Ni(II), Co(III) and Fe(III) complexes of Schiff base ligands derived from S-methyl/S-benzyl dithiocarbazate and 2-S-methylmercapto-6-methylpyrimidine-4-carbaldehyde

Two new pyrimidine based NNS tridentate Schiff base ligands S-methyl-3-((2-S-methyl-6-methyl-4-pyrimidyl)methyl)dithiocarbazate [HL₁] and S-benzyl-3-((2-S-methyl-6-methyl-4-pyrimidyl)methyl)dithiocarbazate [HL₂] have been synthesised by the 1:1 condensation of 2-S-methylmercapto-6-methylpyrimidine-4-carbaldehyde and S-methyl/S-benzyl dithiocarbazate. A Ni(II) complex of HL₁ and Co(III) and Fe(III) complexes of HL₂ have been prepared and characterized by elemental analyses, molar conductivities, magnetic susceptibilities and spectroscopic studies. All the bis-chelate complexes have a distorted octahedral arrangement with an N₄S₂ chromophore around the central metal ion. Each ligand molecule binds the metal ion using the pyrimidyl and azomethine nitrogen and thiolato sulfur atoms (except in the nickel complex, one ligand molecule uses the thione sulfur in lieu of thiolato sulfur atom). In the Ni(II) complex, one of the ligand molecules behaves as a neutral tridentate and the other molecule functions as a uninegative tridentate, whereas in the Co(III) and Fe(III) complexes, the ligand molecules behave as monoanionic tridentate. All the complexes were analyzed by single crystal X-ray diffraction and significant differences concerning the distortion from an octahedral geometry of the coordination environment were observed.     

Determination of antimony in rocks and sulphide ores by flame and electrothermal atomic-absorption spectrometry

Atomic-absorption methods for determination of antimony at mug/g levels in rocks and sulphide ores by flame atomization (FAA) and electrothermal atomization (ETAA) have been described. The FAA method involves the separation of antimony from matrix elements by extraction as the iodide into methyl isobutyl ketone containing tri-n-octylphosphine oxide, from dilute hydrochloric acid solution, followed by direct aspiration of the extract into an air-acetylene flame. If necessary, antimony is first separated from copper and lead by co-precipitation with hydrous ferric oxide from ammoniacal medium and by precipitation of lead as lead sulphate. The ETAA method involves co-precipitation of antimony with hydrous ferric oxide followed by dissolution of the precipitate in dilute nitric acid, mixing with nickel solution as releasing agent, and ETAA measurement by use of a tungsten strip atomizer.     

Optimization of single-column anion chromatography with indirect ultraviolet photometric and fluorimetric detection

Optimization of single-column anion chromatography with indirect photometric and indirect fluorimetric detection is described. A simplex algorithm is used for signal maximization with eluent concentration, pH and flow rates as dependent variables. Absolute detection limits obtained for chloride, nitrite, nitrate and sulphate by indirect photometric detection were 1.0, 1.2, 1.4, and 2.0 ng, respectively. The use of single-beam indirect fluorimetric detection of these anions is also demonstrated. The method was applied to the detection of anions arising from gaseous acids or atmospheric aerosols.