基于云模型的自适应量子免疫克隆算法

利用云模型能够兼顾随机性和模糊性的品质,提出一种基于云模型的自适应量子免疫克隆算法.使用云算子代替通用的量子旋转门这一量子进化算法核心算子用于寻优变异操作;通过控制云算子间的协作,实现算法在进化过程中对搜索范围的动态调整,使算法具有较强的全局搜索能力;同时,补充针对性的优化方案,有效避免了算法陷入局部最优.对标准数值优化问题的仿真对比实验表明,该算法具有寻优能力强、搜索精度高、稳定度好等优点;对非线性系统的参数估计仿真实验,该算法也取得了对参数的高精度有效估计.     

Brittle-Ductile Transition of Ferroelectric Ceramics Induced by Thermally Activated Dislocation Emission

Thermally activated dislocation emission in high-temperature ferroelectric ceramics is investigated through an assumption of thermal stability and a novel analytical method. The stress intensity factor (SIF) arising from domain switching is evaluated by using a Green's function method, and the critical applied electric field intensity factor (CAEFIF) for brittle fracture at room temperature is obtained. Besides, the lowest temperature for single dislocation emission before brittle fracture is also obtained by constructing an energy balance. The multi-scale analysis of facture toughness of the ferroelectric ceramics at high temperature is carried out. Through the analysis, the CAEFIF for crack extension is recalculated. The results show that the competition and interaction effects between dislocation emission and brittle fracture are very obvious. Besides, the higher critical activation temperature, the more columns of obstacles will be overcome. Additionally, the shielding effect arising from thermally activated dislocations is remarkable, thus, the brittle-ductile transition can promote the fracture toughness of high-temperature ferroelectric ceramics.     

三层平板结构声能流计算及传输规律

为了理解多层有源隔声结构的物理机理,同时优化被动隔声结构,需深入分析三层结构中声能量的传输规律。首先对三层板腔结构建模并求解系统的振动响应,然后用数值方法求解平板向封闭空间辐射声的声传输阻抗,并计算各层结构的辐射声功率。最后,通过分析各子系统所占的能量及各层结构四类模态组辐射声功率的变化获得声能量的传输规律。结果表明,按模态类型的不同,能量传输可等效认为存在四个传输通道,各通道的能量传输具有相似的带通特性,其成因在于不同的平板与空腔模态对的耦合强弱不同。     

片层硅酸盐用于热固性PU/PLS复合可能性探讨

高岭土(Kaolinite)和蒙脱土(Montromollite)等粘土,被广泛用作添加剂来改善聚合物的耐热性能。文章用各种先进技术对高岭土与蒙脱土的形态、组成和结构进行表征比较。电子透射电镜及电子探针(TEM/EDX)结果显示高岭土较蒙脱土有较大的粒径和较小的硅铝比,TEM还显示出这些粘土是由片层粒子堆积而成。热重分析(TGA)的结果表明蒙脱土由于失去吸附水从60 ℃升温至90 ℃失重明显(约7%),而高岭土在此温度下几乎不失水。高岭土脱除结构羟基官能团脱水失重的温度大约在510 ℃,低于蒙脱土的670 ℃。室温下光声傅里叶变换(PAS-FTIR)红外光谱显示蒙脱土在羟基吸收区有较强的吸附水的吸收,1 650 cm-1处孤立的弱吸收谱带可给予左证。变温红外和TGA的结果显示,片层硅酸盐表面的结构羟基从100～500 ℃非常稳定,它可以和异氰酸酯基团(NCO)封端的预聚物反应形成热固性PU/PLS复合聚合物。     

FAAS法测定硫酸中的铜、铁和锌

采用火焰原子吸收光谱法测定硫酸中铜、铁和锌,确定了最佳仪器工作条件和样品处理方法.在选择好的实验条件下,测定铜的特征浓度为0.005μg/mL/1%;铁的特征浓度为0.014μg/mL/1%吸收;锌的特征浓度为0.002μg/mL/1%吸收.回收率分别为铜97.7%-98.2%,铁98.2%-99.4%,锌96.8%-98.7%.     

大白桃糖度的近红外漫反射光谱无损检测试验研究

该研究应用近红外(near infrared, NIR)漫反射光谱定量分析技术开展了金华大白桃的糖度检测试验研究。用偏最小二乘回归(partial least square regression, PLSR)方法在800～2 500 nm光谱范围建模,通过比较果汁和不同部位果肉所对应的相关模型的预测结果发现：用水果3个部位(顶部、中部、底部)共9个检测点的果肉平均光谱和糖度平均值建立的模型的结果比果汁或单独某个部位果肉(3个检测点)所建立的模型的结果要好。在此基础上,分析了光谱微分和散射校正预处理对建模结果的影响,结果显示微分光谱建立的模型不如原始光谱建立的模型的结果好,光谱的散射校正处理(用多元散射校正MSC和标准正态变量变换SNV两种方法)有助于提高模型的预测性能。最终建立桃子果肉平均光谱经MSC和SNV散射校正后与糖度的相关模型,MSC和SNV对建模结果的影响基本一致,MSC-PLSR和SNV-PLSR模型的相关系数Rcal和交互验证相关系数Rcross-v分别为0.997和0.939。该研究表明近红外光谱检测技术可用于金华大白桃糖度的定量分析。     

一维粗糙面散射的射线追踪法研究

在考虑遮蔽效应的情况下,应用射线追踪法对一维导体和介质的高斯粗糙面的散射系数进行了研究,并分别计算了考虑一次反射和二次反射的散射系数。同时,利用蒙特卡罗法生成一维高斯粗糙面,计算了考虑一次、二次反射和遮蔽时不同均方根斜率粗糙面的平均散射系数。     

测量不确定度在光学实验教学中的应用

根据复旦大学物理系的教学实践经验,以牛顿环、分光计(分光仪)及迈克耳孙干涉仪等基础物理实验为例,阐述了在基础光学实验中进行测量不确定度的评估方法.     

物理学类中文核心期刊的研究

文章详细介绍了综合测定中文物理学核心期刊的研究方法，并对所测定出的中文物理学核心期刊结论做了客观的评价，以及扼要阐述了它的对物理学科的作用．     

SOLUTE REDISTRIBUTION IN THE INITIAL TRANSIENT REGION OF DIRECTIONAL SOLIDIFICATION SPECIMEN

The solute redistribution during initial transient process of directional solidification of a binary alloy is associated with the solid-liquid interface advancing velocity which will pass a hysteretic process approaching to the externally imposed velocity. In the present paper, a new accelerated growth equation, dV/dt = μG[m/G·(dG_L^*)/dt+V_e-V] is deduced, based on which a new formula for the initial transient solute redistribution is obtained with the reasonable assumption that the solid-liquid interface advancing velocity changes exponentially during solidification. It shows that the kinematic effect dominates solidification at high velocity while the coupling effect of thermal and mass transportation controls that at lower velocity.In addition, another new equation to calculate the time required for a planar interface to lose stability is also found. Since the effects of the imposed thermal gradient are taken into account in the new equations, they are more reasonable and satisfactory than those given by Tiller et al. and by Smith et al.